HaulPro Junior User manual






Check for
smaller packaging!
PRO TIP!
Take count of
all the parts to
make sure
that you have
everything
before you
start!
Tools
Tools

Parts
List
Parts
List
10” Wheels
Wheel Bracket
Nose Plate
Channel Filler
Frame
Axel
Cotter Pin
WasherNut 2Nut 1
Nose Plate
Bolts
Handle
Bolt
x4 x4 x4x4 x4 x2

Start by laying the frame down with the bottom
facing you. Note round cross bars should be
facing up.
1
STEP
PRO TIP!
Top of the frame
has the rounded
handle.

PRO TIP!
Can be easier to
assemble if you
lie the nose o
the end of a
table to bolt
together.
Place Nose Plate down and
slide Channel Filler, Frame, and
Wheel Bracket together. Use
Base Bolts and Nut 1. Hand
Tighten
2
STEP
Top View cut away
Wheel
Bracket
Frame Channel
Filler
Nose
Plate

Add 2 Washers to Axel,
Wheel, another 2 Washers,
and then put cotter pin inside
hole in axel.
3
STEP
PRO TIP!
Make sure
notch in
wheel is facing
outwards
Bend cotter pin with
pliers to secure
wheels.

4
STEP
PRO TIP!
Make sure
notch in
wheel is facing
outwards
Turn Handles to face toward
the back of the assembly and
add two handle bolts and nuts
into the holes to secure handles

PRO TIP!
Lever can be
pressed with
your foot
while you pull
the handles!
Operation
Pressing the lever down,
allows the handles
to be pulled through
the frame.

Push down on frame
to ensure it’s completly
in the 2nd position.

Pull up on frame to return
to the upright position
* Handles click into place
to make it safe to use in
the upright position
CLICK

Contact Us today for help assembling or
to order replacement parts
[e-mail]