ABC WORLDWIDE 20-L User manual

Assembly instructions for transport cart 20-L
1.) For the assembly of the transport trolley you need 20-L
the following materials:
-2x wheels with brakes
-2x wheels without brakes
-base plate made of wood
- ast iron frame
-2x onne ting struts
-Sliding frame
-s rews
-s rewdriver or ordless s rewdriver
-wren h
2.) Mounting of the wooden plate:
The wooden plate is pla ed on the floor and the ast iron frame on top of it, as well as wat h the
pi ture. Now eleven s rews are s rewed to the edge of the frame.
3.) Mounting the wheels:
The 2x wheels with the brake are mounted on the side where the hole for the sliding frame is.
The 2x movable wheels are mounted on the opposite side.
They are fixed with four s rews.

4.) Assembly of the sliding frame:
Put the sliding frame into the mat hing holes as shown in the pi tures.
Now atta h the two onne ting struts. Atta h the s rews from outside to inside, as shown in the
pi ture.