HAWK ENTERPRISES V20 User manual

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
Service Labor - 6 months
Hawk will not, as a maer of this warranty agreement, refund the end user's purchase price.
In the event of a malfuncon resulng in a warranty claim, Hawk, may at its sole opon, replace the
equipment or warranted part with another new part of equal quality instead of repairing that part.
Equipment must be repaired by a Hawk approved service provider; the dealer who sold the new
equipment or any Hawk distributor service department in the US. Repairs or alteraons made by
anyone other than the Hawk factory or a cerfied repair staon, will void the warranty.
Replacement
How to Set Up Warranty Repair
Damages from operaon at other voltages or currents will void the warranty.
Certain normal wear parts are consumed in use of this machine, and are not covered by this
warranty. These parts include, but are not limited too, cords, switches, bumpers, bearings, isolators,
carbon motor brushes, compensators, brushes, pad drivers, bulbs, bags, v-belts and filters. No other
warranes extend beyond the terms of this Hawk Limited Warranty, including implied warranty of
merchantability or fitness of this machine for a parcular use.
No Refund of Purchase Price
Excepons and Exclusions from the Limited Warranty
This warranty does not cover repairs resulng from accident, abuse, misuse, damage in transit, or
lack of proper maintenance. Equipment must be used with electric current noted on the data plate.
The distributor who sold you the machine is responsible for registraon of the machine with the
factory. With this registraon, Hawk will have all of the records required for warranty claim,
including records of ownership, date of delivery and resulng warranty dates and terms,
distributor's locaon, machine model, type and serial number. To find the closest service provider,
contact Hawk Customer Service at 1-574-294-1910 or [e-mail].
Warranty claims must be submied within 30 days of service request.
Hawk Enterprises Limited Warranty
Warranty Start Date: Warranty coverage starts on the date the machine is installed at the end user's
site, or six months from the ship date from the factory, whichever comes first. The distributor who
sold you the machine is responsible for compleng the registraon form at www.
hawkenterprises.com/service_registraon.
This forms idenfies the machine and records warranty state date.
Hawk Enterprises Inc. equipment has been manufactured, tested and inspected with carefully
engineered requirements. Hawk warrants each new machine, part and accessory to be free of
defects in materials and workmanship for a me specified in the table below. Repair or replacement
of defecve parts or service must be conducted by a Hawk authorized service provider.
Motor and Gearbox - 1 year
Non-Wear Items - 6 months
Repair Parts - 90 days
Warranty Coverage - Hawk Air Movers
1
18
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
HAWK HAWK
ENTERPRISES ENTERPRISES
Includes:
Wet/Dry Tool Kit
#HPVA002
Vacuum Hose
15’ Flexible
V2
Wet/Dry
Tank Vacuum
Dry Pick Up 1.5 bushel (14 gallons)
SPECIFICATIONS
Capacity 20 gallon
Wet Pick Up 16 gallons
Power 115V, 50/60 Hz
Amperes 10.7 Amp
Water Li 117 inch
Model V20
Power Cord 35 ., 2-Part, 16/3 cord
Air Flow 112 CF
Wheels (2) 6” rear, (2) 3” front
Weight 62 lbs.
Drain Valve 1.5 inch
Dimensions (HxDxW) 37” x 24.25” x 24”
Sound Levels 68 dB
Motor 2 HP DC, 2 Stage
Subject to Change Without Noce

conductor. Thermally protected, it will automacally shut down if overheated. The motor
will restart automacally once cooled, for as long as it is plugged into a power source.
This BVP50 has a 2-speed, 115-volt, 60 Hz inducon motor with a grounding
ŸCords are not covered by warranty
WARNING! The Total amperage of the BVP25D Air Mover plus all other
devices plugged into the receptacle must not exceed 12 amps.
Grounding Instrucons
In the event of a malfuncon or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.
This tank vacuum is equipped with an electric cord having an equipment grounding
conductor and a grounding plug. The plug must be plugged into a matching outlet that is
properly installed and grounded in accordance with all local codes and ordinances. Do not
modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a
qualified electrician.
ŸDo not use cords that show any kind of wear or damage.
Motor Specificaons & Electrical Requirements
ŸUse three-pronged adapters that are UL and CE approved and with Ground Fault
Circuit Interrupter (G.F.C.I.).
The V20 must be grounded. Should it malfuncon or break down, grounding provides a
path of least resistance for electric current and reduces the risk of electric shock. This
appliance is equipped with a cord that has an equipment-grounding conductor and a
grounding plug. The plug must be inserted into a properly installed and grounded outlet,
in accordance with all local
Power Cords
WARNING!
Improper
connecon of the
equipment-
grounding
conductor can
result in the risk of
an electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug provided with the appliance. If plug
does not fit the outlet, have a proper outlet installed by a qualified electrician.
Electrical Code
NOTE: In Canada, the use of a temporary adapter is not permied by the Canadian
Use with 115V
3-Prong Grounded
Connection
DO NOT
Use with a 3-Prong to
2-Prong Adapter
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com 54
Servicing
blade and allow to dry. Keeping the blade clean increases the blade life.
THE V20 TANK VACUUM SHOULD BE STORED INDOORS.
Upon inspecon, we will advise you of the repairs needed and the cost (if applicable).
Hawk will issue repair or replacement parts depending on warranty.
Do not operate this air mover stacked on top of each other. Do not stack more
than 5 units high for storage.
2. Have your proof of purchase ready.
3. If your tank vacuum includes oponal front-mounted squeegee, rinse the squeegee
CAUTION:
In order to receive service or replacement parts under warranty, you must:
4. Wrap the power cord around the carry handle on top of the unit to keep it untangled.
2. The tank vacuum includes a washable vacuum bag. Inspect for rips or tears. If the bag is
wet, rinse and then hang to dry.
1. Call [phone] for an RMA (Return Merchandise Authorizaon Number)
9. Never move by pulling the cord. Move by holding the tank or the handle on top of the motor
14. Do not pick up hazardous debris like asbestos.
19. Empty tank aer each use to prevent spontaneous combuson.
7. Do not use with a damaged cord or plug.
16. Always use with dust bag and/or filters in place.
1. Unplug the V20 from the outlet when not in use.
6. Use only V20 tank vac recommended tools.
13. Do not pick up spilled paints or varnishes. This plugs the motor and violates the warranty.
17. Do not pick up cement, plaster or drywall dust.
4. Store indoors. Keep the motor dry.
5. Do not use as a toy.
assembly.
8. If the V20 is not working, or has been dropped or becomes wet, contact HAWK for help.
11. Do not handle plug or vacuum switch with wet hands.
The V20 is not designed for this task.
10. Protect the cord from sharp surfaces. Never drive over the power cords. Keep the cord away
from hot surfaces.
3 Connect to a properly grounded outlet only. See Grounding Instrucons.
15. Do not use to pick up lead paint debris. This can send fine lead dust into the air.
Storage & Transportaon
2. Unplug when servicing
12. Do not pick up smoking or burning debris. Do not collect flammable liquids like gasoline.
18. Use cauon when emptying heavily loaded tanks.
20. Protect your eyes when using this tank vacuum
Lubricaon
NO LUBRICATION IS NECESSARY
. The motor is equipped with lifeme lubricated bearings.
Storage & Transportaon
1. Before storing your tank vacuum, it should be cleaned. Rinse the tank, flexible hose and
wands. NEVER store the tank vacuum before cleaning. Soils and bacteria can grow and
create smells and bacterial wastes.
WARNING: To reduce the risk of injury from the tank vacuum accidentally
starng, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.
WARNING: Be sure to disconnect power supply before aempng to
service or remove any components. Do not aempt to service your tank
vacuum beyond what is described in the user manual. For all other
servicing, follow instrucons in the Warranty secon.
Cleaning
User Servicing Instrucons
HAWK HAWK
ENTERPRISES ENTERPRISES
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
ATTENTION!
NEVER operate this unit when flammable materials or vapors
are present -- electrical devices produce arcs or sparks which
may cause a fire or an explosion..
NEVER operate this unit unaended.
WARNING: Be sure to disconnect power supply before aempng to
service or remove any components. Do not aempt to service your
tank vacuum beyond what is described in the user manual. For all
other servicing, follow instrucons in the Warranty secon.
Read all safety rules carefully before aempng to operate the
BVP50H. Please retain this manual for future reference.
WARNING!
ŸTo reduce the risk of electric shock, connect only to a GFCI
protected outlet. Do not expose to water
CAUTION
ŸThis air mover has an automac motor shutoff device. It may
restart without noce.
ŸTo reduce the risk of injury, unplug before servicing.
32
HAWK HAWK
ENTERPRISES ENTERPRISES
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
ŸDo not pick up spilled paints or varnishes. This plugs the motor and violates
the warranty.
Ÿthe air. The V20 is not designed for this task.
ŸAlways use with dust bag and/or filters in place.
ŸUse cauon when emptying heavily loaded tanks.
ŸUnplug the V20 from the outlet when not in use.
ŸUse only V20 tank vac recommended tools.
ŸDo not use with a damaged cord or plug.
ŸDo not pick up smoking or burning debris. Do not collect flammable liquids
like gasoline.
ŸUnplug when servicing and cleaning
USE INSTRUCTION
ŸConnect to a properly grounded outlet only. See Grounding Instrucons.
ŸStore indoors. Keep the motor dry.
ŸIf the V20 is not working, or has been dropped or becomes wet, contact
HAWK Customer Service for instrucon.
ŸDo not use to pick up lead paint debris. This can send fine lead dust into
ŸDo not pick up cement, plaster or drywall dust.
ŸProtect the cord from sharp surfaces. Never drive over the power cords. Keep
the cord away from hot surfaces.
ŸDo not pick up hazardous debris like asbestos.
ŸProtect your eyes when using this tank vacuum
ŸDo not handle plug or vacuum switch with wet hands.
ŸDo not use as a toy.
Ÿ Never move by pulling the cord. Move by holding the tank or the handle on
top of the motor assembly.
ŸEmpty tank aer each use to prevent spontaneous combuson.
USE INSTRUCTION
ŸIf your tank vacuum includes oponal front-mounted squeegee,
rinse the squeegee blade and allow to dry. Keeping the blade
clean increases the blade life.
ŸIn order to receive service or replacement parts under warranty,
you must Call [phone] for an RMA (Return Merchandise
Authorizaon Number)
ŸThe tank vacuum includes a washable vacuum bag. Inspect for
rips or tears. If the bag is wet, rinse and then hang to dry.
ŸBefore storing your tank vacuum, it should be cleaned. Rinse the
tank, flexible hose and wands. NEVER store the tank vacuum
before cleaning. Soils and bacteria can grow and create smells
and bacterial wastes.
ŸNO LUBRICATION IS NECESSARY
. The motor is equipped with
lifeme lubricated bearings.
ŸWrap the power cord around the carry handle on top of the unit
to keep it untangled.
ŸTHE V20 TANK VACUUM SHOULD BE STORED INDOORS. NEVER
WASH THE MOTOR HEAD ASSEMBLY WITH WATER HOSE
SERVICING
ŸUpon inspecon, we will advise you of the repairs needed and the cost
(if applicable). Hawk will issue repair or replacement parts depending
on warranty.
WARNING: Be sure to disconnect power supply before aempng to
service or remove any components. Do not aempt to service your tank
vacuum beyond what is described in the user manual. For all other
servicing, follow instrucons in the Warranty secon.
Cleaning
WARNING: To reduce the risk of injury from the tank vacuum accidentally
starng, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.
User Servicing Instrucons

HAWK HAWK
ENTERPRISES ENTERPRISES
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
HAWK V20 Wet/Dry Tank Vacuum
User’s Manual
Problem Solving
Tank is full. Empty.
If the bag is ripped, order replacement #HPWDH0001ASSY.
Filter is damaged. Inspect for rips or tears. Replace.
No power at the wall plug. Check for power.
No filter or filter is incorrectly installed. Correct filter installaon
Blocked or damaged motor. Contact Hawk Customer Service.
Vacuum Will Not Start
Broken on/off switch. Replace switch.
No Sucon / Poor Sucon
Loose flexible vacuum hose. Tighten.
Leaking hose mount on tank. Tighten or replace.
Filter is clogged. Wash, rinse, dry.
Motor “Hums” or Sparks When Switched On
These may be packed or stored in the tank. Check the tank.
Tools or Accessories Missing
Damaged motor. Contact Hawk Customer Service for direcons
Dust Comes Out of Exhaust
Clogged filter. Wash, rinse, dry.
V20 Tools
Wet/Dry Tool Kit
#HPVA002
15’ Flexible
Vacuum Hose
#HPVT1060
Washable Cloth
Vacuum Bags
#HPWDH0001ASSY
lockwasher
10. 5/16" Split lockwash
5. 1/4" External tooth
machine screw (Black)
8. Main dolly frame
11. 5/16 - 18 Hex nut
2. Handle upright
1. Handle
6. 1/4 - 20 Hex nut (Black)
3. Handle brace
4. 1/4 - 20 x 11/4" Hex head
7. Rear dolly frame
9. 5/16 - 18 x 21/2" Hex head bolt
13. Threaded knob
14. Axle
15. 1/4 - 20 x 5/8" Hex head
machine screw
16. 1/4 - 20 Hex nut
12. Tank retainer bracket
17. Caster socket
19. Bumper
18. Caster
20. 10" Wheel (25.4cm)
21. Cap nut
22. Accessory basket
23. Basket adapter