Hawking H-UC232S User manual

H-UC232S
USB 1.1 Compliant
RS-232 Serial Interface
Bus Powered
Two Year Warranty
PACKAGE CONTENTS:
USB Serial Converter
Driver Installation Diskette
Easy-to-follow User's Manual
USB Printer Adapter: USB to Parallel Cable
The Hawking H-UC232S USB Serial Converter operates as a bridge
between one USB port and a standard RS-232 Serial Port. You can easily
connect the H-UC232S cable to your PC or Mac and connect it to any RS-232 device
or DB-9P Male connector such as a PDA, Scanner, Printer, etc. Installation is easy
with USB Plug and Play functionality. Connect your components together in no time
at all!
SYSTEMS REQUIREMENTS:
PC or Mac with available USB Port
I BM Compatible Pentium-233 MHz or higher
 MS Windows 98SE, ME, 2000, & Mac 9.04
and 9.1
64 MB RAM or above
CAREFREE MULTIMEDIA
CONNECT WHEREVER YOU WANT•WHENEVER YOU WANT
USB Serial Converter:
USB and Serial Bridge
READY, NETWORK & GO!
It's easy to install, it's easy to use! Everyone
can do it.
Step 1 - Connect the Cable
Connect the cable to your components and
PC or MAC.
Step 2 - Install the Drivers
Power on your computer and insert the
installation disk into your CD-ROM drive.
ORDERING INFORMATION:
H-U2PS2 PS2 to USB Adapter
H-U225HD 2.5" HD to USB Adapter
H-UC232S Serial Port to USB Adapter
Copyright © Hawking Technologies, Inc. 2002.
All rights reserved. All trademarks herein are
the property of their respective owners.
HAWKING TECHNOLOGIES, INC
USA: 6A Faraday, Irvine, CA 92618
Europe: Rotterdam, The Netherlands
Sales: 888.662.8828, 949.580.0888
Fax: [phone]
Email: [email protected]
Email: [e-mail]
SPECIFICATIONS:
Operating Systems:
Windows 98SE/ME/2000
MAC 9.04 and 9.1
Standard:
USB specification Revision 1.1 compliant
Installation:
Plug and Play and Hot Plug Capable
Serial Interface:
RS-232
Data Transfer Rate:
500Kbps
Power Requirement:
None