hawos Routine User manual

Manual for „Routine“
Contents
Page 2 Routine at a glance
Page 3 Brief instructions for routine
Page 4 Adjusting the degree of fineness, optional accessories
Page 5 Trouble shooting (mill stones)
Page 6 Chain retightening, service
Page 7 Technical Specifications
Page 8 Spare parts, manufacturer’s address

Brief instructions for hawos Routine
Hawo's "routine" is designed for the private as well as the commercial sector.
Attention: Safety first!
If there is a defect, do not use the unit until a repair has been performed. Repairs
may only be carried out by hawos authorized specialists.
Do not reach into the hopper or the flour outlet during operation - risk of injury!
Intended Use
The device (the mill) is for grinding dry grain. This includes: wheat, rye, spelled,
barley, oats, millet, corn, durum wheat, brown rice (not parboiled rice!), buckwheat,
greens, chickpeas, green peas, quinoa. On request, we would be more than happy to
inform you whether your desired grains can also be ground.
Improper use
The mill is only to be operated by knowledgeable persons. Do not use moist grain. Do
not use contaminated grain. No technical alterations may be made to the mill.
Attachable funnel
Adjusting lever fine - coarse
3-way adjustable pedals
Multi-Adapter
Attach transverse support
-2-

Brief instructions for hawos Routine
Preliminary note: The hawos "routine" has a housing made of beechwood
multiplex.
- The pedals can be mounted in 3 different positions as desired. Mount both
pedals in the same hole. The further out you screw in the pedals, the greater
the crank radius; further distance = easier to pedal.
- Secure the front cross brace with the supplied M8 screws.
- Attach the hopper onto the base unit.
Place a suitable container under the flour outlet. Now your mill is ready for use. Take
your comfortable favorite chair / armchair and position the mill at the distance that
best suits your leg length.
Put your "routine" on a firm and level ground.
Tip: To avoid slipping, place the chair and mill on a rug.
If the hawos “Routine” still slips during operation, you can fix the routine firmly to
the ground via the dedicated holes on the front.
-3-

Adjusting the degree of fineness
The degree of fineness can be continuously adjusted between "fine" and "coarse" with
the adjustment lever.
- Lever up = fine grinding result
- Lever down = coarse grinding result
It should be noted: You can transition from "fine" to "coarse" at any time effortlessly.
When adjusting from "coarse" to "fine", either the grinder chamber must be empty or you
must pedal vigorously as grains will otherwise get trapped between the stones making
the transition difficult.
Optional accessories
Grinding chamber with adapter!
On the white grinding chamber with front facing multi adapter you can attach a variety of
attachments such as flakers, mincers, juicers etc. made by companies such as
Messerschmidt and Jupiter.
When using accessories, the adjustment lever of the mill must then be set down to
“coarse".
-4-

Trouble shooting (mill stones)
The mill stops during operation?
Checking the grinding chamber
- Is the grain too moist?
- Is the grinding chamber clogged?
- Is there a foreign body between the stones?
- The "routine" should be regularly cleaned of leftover flour. To do this, set the mill to "coarse"
and grind it empty.
Using a suitable vacuum cleaner at the flour outlet of the mill, vacuum away the flour
residues. The grinding chamber is fixed with only 2 brass round head nuts and thus removable
for easy and quick cleaning. With a brush, the grinding chamber can be cleaned very easily.
The multiplex housing is easy to clean with a damp cloth.
Nevertheless, if the grinding stones are smeared, it is advisable to grind some rice on a
medium-coarse setting. The rice removes the fats and moisture from the stone that caused
them to stick together.
-5-

Chain retightening
1 fixing screw
2 lag screw
3 Phillips screw
The mill is powered by an 8 mm industrial chain and equipped with a double-mounted
crank and grinding shaft. The translation is 1:2.7
If the chain needs to be re-tightened, loosen the fixing screw (1), to tighten use the 13 mm
lag screw on the left and the Phillips screw on the right of the unit - adjust both screws
evenly. Then tighten fastening screw (1) again.
Service
You can get Service-Tips from your hawos customer support team
Phone: [phone] - 40 12 00 Email: [e-mail]
-6-
3
1
2

Technical Specifications for hawos „Routine“
Grinding power (depending on the pedaling speed)
fine with wheat: ca. 150 g
Grinding power (depending on the pedaling speed)
fine with wheat: ca. 350 g
Hopper capacity: 3,2 kg
Height with original hopper: 62 cm
Depth (base): 62 cm
Width (base): 50 cm
Type of Wood: Beech Multiplex
Surface treatment: Oiled
Diameter of grinding stones: 125 mm
Position of the mill stones: vertical
Weight without packaging: ca. 32 kg
Warranty: 10 Jahre
Accessories included as standard: Hopper (stackable)
Hopper lid
Allen Key
Additionally available accessories: Multiadapter grinding
chamber
All products and accessories can be found at www.hawos.de
-7-

Spare Parts
Only accessories and spare parts approved by the manufacturer may be used. Original
accessories and original spare parts guarantee that the device can be operated safely and
trouble-free.
Starke Mühlen – Feines Mehl
hawos Kornmühlen GmbH
Massenheimer Weg 25 61352
Bad Homburg v.d.H. Germany
Phone: [phone]
Fax: [phone]
www.hawos.de
[email protected]
-8-