HEAD WATCHES Seoul User manual

SMARTWATCH
USER MANUAL
Seoul
Version 05.2021

2HEAD Smartwatch User Manual
CONTENTS
3 First Steps
4 Navigation
4 Settings Menu
5 Functions
5 Sports Modes
5 Temperature
5 Step Count
5 Heart Rate
5 Blood Pressure
5 Sleep Monitor
6 Functions
6 Heart Rate Variation
6 Breathing
6 Data Synchronization
6 Dial Standby
6 Dial Design
6 Sedentary Reminder
6 Alarm Reminder
7 Functions
7 Firmware upgrade
7 Unbind your Smartwatch
7 Connect via Bluetooth
8 FAQ and Tips
8 Waterproofness
8 User Help
9 Warranty
9 License

3HEAD Smartwatch User Manual
Press the Touch Key for some seconds to start your watch.
If you want to switch off your watch, enter the Tool menu,
choose ”Power off“ and also press the Touch Key for a few
seconds to confirm the shutdown.
Charging Instructions
You may have to charge the watch at the beginning if the
battery is empty. Please notice the ”charging “ icon on the
back of the watch and remove the strap. Use the USB plug to
charge the smartwatch. It supports computer USB or mobile
phone 5V standard charger, and it can be fully charged in
about two hours.
Download HEAD Watches App
Go to www.headwatches.com/app from your smartphone and
download the app. Alternatively, you can also scan this QR
code with your smartphone or search for ”HEAD WATCHES“ in
Apple App Store oder Google Play Store.
FIRST STEPS
DISPLAY
TOUCH KEY
SENSORS
REMOVED STRAP
USB PLUG

4HEAD Smartwatch User Manual
Start
Screen
Body & Skin
temperature Steps Detection HRV Breathe Information Sport mode Tool
Navigate through your smartwatch
Use the Touch Key to access the different areas of the watch.
• Short clicking will take you through the different areas.
By continuing clicking through the selection, you will go
back to Start Screen.
• If you want to select a specific area or exercise, press
and hold the Touch Key for a few seconds.
• Within the selected mode you continue moving with a
short click.
• Each area has a return arrow. To go back to the selection
press and hold the Touch Key for two seconds.
NAVIGATION
Control Center
Click shortly through the menu to open the last area ”Tool“
to enter the settings menu interface:
• The first icon turns the vibration on and off. With each
click a vibration is triggered. Press and hold the Touch Key
to switch on/off.
• With the second icon ”Restore“, the watch can be reset to
factory settings. Long press to select whether to restore
the factory settings. All data in the bracelet will be cleared
after recovery.
• The third icon ”Power off“ can turn off the watch. Press
and hold the Touch Key to confirm the shutdown.
• The fourth icon ”Version information“ shows Bluetooth
name and adress and the version number of the bracelet.
You can also make some settings directly in the app.
SETTINGS MENU

5HEAD Smartwatch User Manual
Sports Modes
Select the corresponding sports mode and press and hold
the Touch Key to start the corresponding exercise mode;
long press to exit the sports mode.
Press to return to sports mode to continue.
Press to exit the sports mode and save the data.
Press to exit the sports mode and not save the data.
Temperature
Hold your wrist for 5 minutes after wearing the bracelet for
the first time; the skin temperature and body temperature
can be detected. When the wristband exceeds 37.3 °, the
wristband will vibrate to remind you of the high temperature.
Step Count
The step counter is activated by default. It displays the cur-
rent number of steps, kilometers, calories and heart rate. The
data is deleted every day at 12 am.
Heart Rate
Put the smartwatch on your wrist (left/right) correctly. Enter
the heart rate menu and measure the heart rate value con-
tinuously. After the bracelet is bound to the app, the heart
rate data is synchronized to the app in real time.
Blood Pressure
Put the smartwatch on your wrist correctly. Enter the blood
pressure menu to measure a single blood pressure value.
After the bracelet is bound to the app, the blood pressure
data is synchronized to the app in real time.
Sleep Monitor
Sleep monitoring time period: 21:00 in the evening to 09:00
the next day. After the watch generates data and exits sleep
monitoring, the sleep data on the watch can be synchronized
to the app for viewing after connecting to the app.
FUNCTIONS

6HEAD Smartwatch User Manual
Heart Rate Variation
Make sure that you wear the watch properly on your wrist
during the ECG test. After the function is turned on, touch
the screen position with your finger to start the measure-
ment. The test will end after 30s. If it is less than 30s, the
prompt to return to the fingertip page is displayed.
Breathing
Put the smartwatch on your wrist correctly and enter the
breath menu. After 2 minutes, the breath guide begins.
Follow the light spot to adjust your breath.
Data Synchronization
The watch is successfully connected to the app, and the
watch data can be synchronized to the app.
Dial Standby
Open: Wear the watch correctly on your wrist. When you lift
your wrist to look at the watch, the watch will automatically
brighten the screen.
Close: Wear the watch correctly on your wrist.
Dial Design
Choose an existing watch face: Connect to the app and select
a new dial design in the app to replace the old one. Confirm
the dial through clicking the Touch Key on the watch. After
the dial is synchronized, the watch will automatically display
the new dial.
Sedentary Reminder
Set the start time, end time, sedentary time interval (minu-
tes) and threshold (steps), click to enter the repeat to select
the sedentary reminder date (week). When the sedentary
time is up, the bracelet vibrates, showing sedentary icon.
Alarm Reminder
Click the alarm reminder setting to add the alarm time. When
the alarm time is up, the bracelet will prompt the alarm icon.
FUNCTIONS

7HEAD Smartwatch User Manual
Firmware upgrade
Detect whether the firmware version of the bracelet is the
latest version. It will prompt if there is a new version and
update to the latest version.
Unbind
Connect the watch to the app. Click unbinding with bracelet
on the device interface to unbind the device. Please ignore
the paired device in the phone settings of iPhone.
Connect via Bluetooh
Not connected:
After the smartwatch is turned on, the Bluetooth is always in
the searched state. After opening the app, enter the device
binding device and select the corresponding device name of
the wristband to bind the wristband to the app.
Connected:
Watch time synchronization: The watch is successfully con-
nected to the app. Click to synchronize the time between the
watch and the mobile phone.
FUNCTIONS

8HEAD Smartwatch User Manual
Frequently asked questions and answers
Please avoid exposing the device to extreme temperatures
that are too cold or too hot for a long time, which may cause
permanent damage.
Water Resistants
Your smartwatch is IP68 waterproof, which means your
watch is not 100% waterproof but only protected against
splashes of water and sweat. You shouldn‘t swim, bathe, or
shower with the watch. You should also avoid washing your
hands with the smartwatch.
Why can‘t I take a hot bath with my watch?
The temperature of the bathwater is relatively high, it will
produce a lot of water vapor. The water vapor is in the gas
phase, and its molecular radius is small, and it is easy to
seep in from the gap of the smartwatch case. When the
temperature drops, it re-forms into liquid water droplets,
which is easy to cause The internal circuit of the smartwatch
is short-circuited, which damages the circuit board of the
smartwatch and damages the smartwatch.
No power on, no charging
If you receive the smartwatch that does not turn on, it may
be that a collision occurred during the transportation of the
smartwatch and the battery Seiko board was protected, so
plug in the charger to activate it.
If the battery is too low, or the smartwatch does not turn
on after a long time without using the smartwatch, please
plug in the charger and charge for more than half an hour to
activate.
User help
You can find more help in the app.
Go to Profile > About > Help
FAQ AND TIPS

9HEAD Smartwatch User Manual
HEAD is a registered trademark of HEAD Technology GmbH
and HEAD Sport GmbH and is used under license by ELYSEE
GROUP.
ELYSEE GROUP
Heerdter Lohweg 212
40549 Duesseldorf
Germany
[e-mail]
www.elyseegroup.de
Warranty description
• When this product is in normal use, if there are product
quality problems caused by manufacturing, materials,
design, etc.,
• Starting from the date of purchase, the motherboard is
guaranteed for free within one year, and the battery and
charger are guaranteed for half a year.
• No free warranty is provided for failures caused by the
user‘s personal reasons, as follows:
• Failure caused by unauthorized disassembly or modifica-
tion of the watch.
• Failure caused by accidental falls during use.
• All person-made, faults and misuses of a third party (such
as water in the host, external force cracks, scratches,
damage to peripheral components, etc.) are not covered
by the warranty.
• When requesting a free warranty, please provide a war-
ranty card with the date of purchase and the stamp of the
place of purchase.
• When the user repairs the product, please take the product
to our company or our company‘s dealership.
• All functions of the product are based on physical objects.
WARRANTY
LICENSE