Heator SRE 704 User manual

Strictly for internal use
Edition 2002 -2003
TECHNICAL SPECIFICATIONS
Type heater Injection
Brand name Heator
Model no. SRE 704 (Type B)
Toyotomi Model Name LC-V302-HT
Grey 8713508715599
THE 10 MOST IMPORTANT SPARE PARTS
Spare part de scription Model EAN Code
Burner mat D 8713508703916
Removable fuel tank D 8713508401607
Fuel tank cap high A 8713508400600
Fuel filter high A 8713508401003
Burner mat adhesive 8713508403403
Fuel tank cap cover 8713508710365
Manual fuel pump 8713508400105
Mica window 8713508135007
Main circuit board
Fuel pump
BOTTOM LINE ASSORTMENT
*Values P1, P2 and P3 are i ndications
Burner type Electronic Injection Dimensions (mm) Width 374
Burning System (BI) (including base plate) Depth 280
Capacity (W) max. 3000 Height 430
Capacity (W) min. 800 Fuel consumption (l/hr) Max 0.313
Capacity P3 (W)* 2340 Min 0.083
Capacity P2 (W) 1728 Fuel consumption (g/hr) Max 250
Capacity P1 (W) 1152 Min 67
Tank capacity 4.0 litres Power consumption Preheat 320 W
Burning time tank (hr) 13 hours (MIN) Burning 32 W
48 hours (MAX) Noise level High 37 dB
Suitable space (m2)12-48 Low 21 dB
Suitable space (m3)30-120 Weight heater (kg) 9.5
Mains 220V/230V AC/50 Hz
Accessories Manual fuel pump, transportation cap, A5 size operating manual
Languages manual Dutch/French/German/English/Spanish/Italian
Guarantee 2 years (except the burner mat and the manual fuel pump)
SRE 704
Injection

Strictly for internal use
Edition 2002 - 2003
FEATURES HEATOR SRE 704 INJECTION
Wickless Design: Provides clean and economical heat without wick maintenance or
replacement.
Semi-Automatic Operation: Features a 24-hour programmable timer and integrated
thermostat controller to maintain the desired room temperature.
Information Display: Allows you to keep track of all important heater functions.
Cool Top Cabinet: Prevents accidental contact burns.
Built-in Fan: Circulates clean, even warmth throughout the room.
Safety Device: Equipped with a flame rod sensor, an over heat protector, a tip-over
switch and a burner thermistor for safety heating.
Additional High Burning Mode: Also known as Booster. It allows you an additional
10% capacity, for 5 minutes, on top of the maximum burning mode during the cold
start (room T<10°C and set T>15°C).
Automatic Air Flow Control: The built-in-fan regulates its speed automatically when
the heater changes from burning mode.
Key-Lock For Children: Once this button is activated, the other buttons will be
deactivated except the power button.
Fuzzy Logic: A self-managing temperature control. By means of this feature you are in
control to your direct heating requirements.
Stand-by Position: 5 minutes after switching off the heater, the information on the
display will disappear and the heater will automatically switch into stand-by position.
Blind stamping on the power button. This way, the power button can even be found in
the dark.
Automatic cleaning mode.
Laser Burner
Information Display
425 mm 325 mm
488 mm
20 ft 400
40 ft 816
Block 8x4=32
Euro 6x4=24
10,5
Gross Weight:
Fuel Filter
Transportation Cap
Injection
Error code E-7. The heatershuts off when the room temperature exceeds 28°C
The interval of minutes of the Timer is 5 minutes
No anti-leakage valve
No plumb bob
No fuel tank cap cover
EROR shows in display if child lock is active and power button is used
New design operation panel
New:
- automatic burner switch off after a 48 hours continuous use.
- top and bottom end of the carton box will be brown instead of white.
Remarks