HELLER HRBF90R User manual

READ AND SAVE THESE INSTRUCTIONS
Instruc Manual
90L Retro Bar Fridge
Model: HRBF90R ,HRBF90B

BEFORE FIRST USE
IMPORTANT SAFEGUARDS
OPERATING INSTRUCTIONS
STORING & FREEZING FOOD IN THE FREEZER-BOX
ENERGY SAVING ADVICE
IN THE EVENT OF A POWER FAILURE
CARE & CLEANING
FEATURES
TROUBLE SHOOTING GUIDE
FOR YOUR SAFETY
2-4
5
5
6
6
6
6-7
8
9
10

Please read and follow the instrucons in this user manual even if you feel you are familiar with the product,
and nd a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product idencaon plate) and
the date you received the product, together with your purchase receipt and aach to the warranty and
service informaon. Retain in the event that warranty service is required.
NOTE: The rang of this product (as marked on the product idencaon plate) is based on specic loading
tests. Normal use or the use of other recommended aachments may draw signicantly less power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should always be followed, including the
following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT!
WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:
Always operate the product from a power source of the same voltage, frequency and rang as indicated
on the product idencaon plate.
Remove the unit from its packaging and check to make sure it is in good condion before using.
Do not let children play with parts of the packaging (such as plasc bags).
Close supervision is necessary when the product is used by or near children or inrm persons. Do not
allow children to use it as a toy.
Before unplugging the power cord, be sure to turn the power o. When touching the unit, be sure your
hands are dry to prevent electrical shock.
Improper installaon, adjustment, alteraon, service or maintenance can cause injury or property
damage. Refer to this manual. For assistance or addional informaon, consult a qualied installer or
service agent.
Keep venlaon openings, in the appliance enclosure or in the build-unstructured, clear of obstrucon.
Do not use mechanical devices or other means to accelerate the defrosng process, other than those
recommended by the manufacturer.
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are
of the recommended by manufacturer. Do not damage the refrigerant circuit.
To reduce the risk of electrical shock, do not immerse or expose the product of exible cord to rain,
moisture or any liquid other than the intended water ller and ice cube tray.
This product should not be used in the immediate vicinity of water, such as bathtub, washbowls,
bathroom swimming pool etc. Where the likelihood of immersion or splashing could occur.
Never install the unit where it could be subject to:
- Heat sources such as radiators, heat registers, stoves or other products that product heat.
- Direct sunlight
- Excessive dust
- Mechanical vibraon or shock
- Lack of venlaon, such as book case or cabinet
- Uneven surface
- Moisture
Switch oand unplug from outlet when not in use, before assembling or disassembling parts and before
cleaning. Remove by grasping the plug- do not pull on the cord.
Do not run the power cord under carpet. Do not cover the power cord with throw rugs or runners. Route
the power cord away from walking paths so that nobody can trip over it. The cable should be kept away
from heat, sharp edges and oil.
3

Be sure that no other high current appliances are plugged into the same circuit as your appliance, as an
overload can occur.
Avoid the use of an extension cord as the extension cord may overheat and cause a risk of fire.
Do not use the appliance for other than its intended use.
Do not use outdoors. FOR INDOOR USE ONLY.
If posi oned next to another fridge or freezer, leave a minimum gap of 2cm between the appliances in
order to avoid condensa on.
A clearance of 50mm should be le above the appliance. If this cannot be achieved you should ensure a
clearance of 25mm is maintained on each side of the appliance.
Please ensure that there is a small ‘air-gap’ between the condenser on the rear of the appliance and the
rear wall.
Do not place or store heavy items on the top of this appliance.
Ensure that the appliance is posi oned upright on a firm flat floor, so that the cabinet is stable.
This appliance must be level. Adjust the level by screwing the adjustable feet up or down (use your fingers
or a suitable spanner).
Your old appliances contain insula on gases and refrigerant that must be disposed of correctly. Please
ensure that the refrigerant circuit is not damaged before the appliance is taken away for correct disposal in
line with current legisla on. If there is any doubt contact your Local Authority for instruc ons.
If using an adaptor, this must be used in accordance with the manufacturer’s instruc ons and ensure that
the electrical circuit is not overloaded as this could cause overhea ng.
Do not twist or bend the cables, and keep them away from hot surfaces.
Do not plug in or unplug this appliance with wet hands.
Make sure that the power cable is not trapped underneath the appliance.
Allow the appliance to stand for a minimum of 4 hours a er installa on. Plug in the appliance and switch
on at the mains supply.
Set the thermostat control to the required se ng as detailed in the Temperature Control sec on on the
instruc on manual.
Leave the appliance for approximately 4 hours for the correct temperature to be reached.
Do not place the appliance close to the wall, a distance exceeding 75mm ,30mm distance from both side.
Locate the appliance in a cool well-ven lated room and make sure that the air vents are clear.
Try to avoid keeping the door open for a long me, warm air will enter the cabinet and may cause a build
up of ice, as well as affec ng the energy consump on. Ensure there are no obstruc ons preven ng the
door from closing properly.
Ensure that the door seal is clean and there are no tears or splits.
Keep the most perishable foods, (those with a short shelf-life, such as cooked meats), in the coldest part of
the fridge. The Salad Crisper Box is the warmest part of your fridge and should be used for vegetables,
salads and fruits etc.
Do not overload the fridge: the cooling air that circulates to keep the fridge cold gets blocked and pockets
of warm air form.
If there is a power failure, keep the door closed. When the power has been restored the appliance will start
to operate, but it may take some me to achieve the pre-set opera ng temperature. Check the condi on
of your stored food items and liquids.
This appliance contains the refrigerant isobutene (R600a). This is a natural gas with a high level of
environmental compa bility and flammability; however, cau on is required as isobutene is a flammable gas.
It is essen al that refrigerant tubes are not damaged during transporta on.
Do not damage the refrigerant coil.
The use of a achments or accessories not recommended or sold by the product distributor may cause
personal or property hazards or injuries.
This product is intended for normal domes c/household use only.
Use this unit as described in this manual. Any other uses, not recommended by the manufacturer, may
cause fire, electric shock, or injury to persons and may void the warranty.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabili es, or lack of experience and knowledge, unless they have been given supervision or
instruc on concerning the use of the appliance by a person responsible for their safety.
3

The installa on of a residual current device (safety switch) is recommended to provide addi onal safety
protec on when using electrical appliances. It is advisable that a safety switch with a rated residual
opera ng current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See
your electrician for professional advice.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: If the supply power cord is damaged, the power cord must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
This product has not been designed for any uses other than those specified in this booklet.
CAUTION: DO NOT COVER the appliance in any way in order to avoid overhea ng and fire.
CAUTION - RISK OF ELECTRIC SHOCK: To reduce the risk of electric shock do not open this device, there
are not serviceable parts for customers. Please refer any maintenance or repair to qualified personnel.
When the appliance is not in use for long periods, remove the contents and disconnect from the electricity
supply. Then clean the appliance, leaving the door ajar un l you wish to use the appliance again.
WARNING: Do not store explosive substances such as aerosol cans with a flammable propellant in the
appliance.
This appliance is intended to be used in households but is not intended to be used in applica ons such as:
staffkitchen areas in shops, offices and other working environment;
-farm houses and by clients, motels and other residen al type environment;
-bed and breakfast type environments;
-catering and similar non-retail appliances.
When disposal of the appliance, it must be done by the manufacturer or its service agent or a similarly
qualified person in order to avoid fire and other hazard.
SAVE THESE INSTRUCTIONS
DANGER– Risk Of Fire Or Explosion. Flammable Refrigerant Used. To Be Repaired Only By
Trained Service Personnel. Do Not Puncture Refrigerant Tubing
CAUTION – Risk Of Fire Or Explosion. Flammable Refrigerant Used. Consult Repair
Manual/Owner ’s Guide Before Attempting To Service This Product. All Safety Precautions Must
be Followed
CAUTION – Risk Of Fire Or Explosion. Dispose Of Property In Accordance With Federal Or Local
Regulations. Flammable Refrigerant Used
CAUTION – Risk Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing; Follow Handling
Instructions Carefully. Flammable Refrigerant Used
WARNING:
WARNING:
the appliance.
4
This appliance contains R600a refrigerant which is flammable.
It is hazardous for anyone other than an Authorised Service Person to service this appliance.
In Queensland, the authorised Service Person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants,
to carry out Servicing or repairs where the gas system is being opened or charged.

BEFORE FIRST USE
Before use, remove all packaging materials and inspect the appliance for any damage. If there appears to be any
damage, please take the unit back to place of purchase for a replacement.
OPERATING INSTRUCTIONS
A. Switching on the Appliance :
Allow the appliance to stand for a minimum of 4 hours a er installa on. Plug in the appliance and
switch on at the mains supply.
Set the thermostat control to the required se ng as detailed in the Temperature Control sec on.
Leave the appliance for approximately 4 hours for the correct temperature to be reached.
Do not place the appliance close to the wall, a distance exceeding 75mm，30mm distance from both side.
B.Temperature Control:
The temperature selector knob is located on the right hand side of the inner cabinet (see Descrip on of the
Appliance on page 8). Please note that this unit does not have a freezer compartment. It has a freezer box which
maintains a cooling temperature.
Se ng “0”: Unit Off
Se ng “1”: Unit On – Warmest Temperature
Se ng “3” Normal Opera on (adequate for most situa ons)
Se ng “7”: Coldest Temperature
CAUTION: Select a suitable loca for the appliance. Always choose a safe loca in accordance to
the safely recommenda outlined.
.
NOTE: Before inser the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the ra label, and that the socket has an earth facility.
NOTE: You may hear bubbling sounds when the refrigerant is pumped to the cooling system and
through the coils or tubing at the rear of the appliance. When in oper mode you may hear a
slight whirring sound or noise. The thermostat controls the oper of the compressor,
and you may hear a slight click as it cycles in and out.
IMPORTANT: During high ambient temperatures e.g. on hot summer days, it may be necessary to
set the thermostat to the coldest g (posi 7). This may cause the compressor to run
c order to maintain a low temperature in the cabinet.
1
0
3
4
5
6
7
2
coldest Warmest
5

STORING & FREEZING FOOD IN THE FREEZER-BOX
This appliance has a two star freezer-box and is suitable for the long-term storage of frozen food items. It can also
be used for freezing and storing fresh food items.
You should always follow the storage guidelines printed on each food produce packaging, however the following
information is provided as a general guide for the maximum storage life of frozen items:
•Fresh Meat and Poultry –up to 6 months
•Cooker Meats –up to 2 months
•Fresh Fish –up to 6 months
•Fruit and Vegetables –up to 8 months
•Bread and Cakes –up to 3 months
ENERGY SAVING ADVICE
•Do not install the appliance close to sources of heat, such as a cooker, dishwasher or radiator.
•Locate the appliance in a cool well-ventilated room and make sure that the air vents are clear.
•Try to avoid keeping the door open for a long time, warm air will enter the cabinet and may cause a build
up of ice, as well as affecting the energy consumption. Ensure there are no obstructions preventing the
door from closing properly.
•Ensure that the door seal is clean and there are no tears or splits.
•Keep the most perishable foods, (those with a short shelf-life, such as cooked meats), in the coldest part of
the fridge. The Salad Crisper Box is the warmest part of your fridge and should be used for vegetables,
salads and fruits etc.
•Do not overload the fridge: the cooling air that circulates to keep the fridge cold gets blocked and pockets
of warm air form.
IN THE EVENT OF A POWER FAILURE
If there is a power failure, keep the door closed. When the power has been restored the appliance will start to
operate, but it may take some time to achieve the pre-set operating temperature. Check the condition of your
stored food items and liquids.
CARE & CLEANING
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
6

To keep your domes c refrigerator oper efficiently and safely, periodic inspec d cleaning of
several components once a month is recommended.
CLEANING YOUR REFRIGERATOR:
For safety reason, switch off and unplug the appliance from outlet before cleaning. Remove by
grasping the plug – do not pull on the cord.
Remove the shelf and wipe down. Place it in a secure place, and replace it r the interior of
the refrigerator has been wiped clean.
Wipe the inside and the outside of the refrigerator with a damp cloth, using lukewarm water.
If the refrigerator is very dirty, wipe it with a neutral detergent first, then use a clean cloth to dry
it.
Do not use other types of detergents, cleaners, abrasive powder or solvents which may contain
chemicals that could damage the lacquer coat and c surface of the refrigerator.
INTERNAL CLEANING:
Clean the interior and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and
dry thoroughly. Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
EXTERNAL CLEANING:
Wash the outer cabinet with warm soapy water. Do NOT use abrasive products. There may be sharp edges on the
underside of the product, so care should be taken when cleaning. Once or twice a year dust the rear of the
appliance and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumula on
of dust will affect the performance of the appliance and cause increased energy consump on.
DEFROSTING:
If ice builds up in the ice-box and exceeds 3-5mm, empty the contents and switch offthe appliance. Also leave
the door open and allow the ice to melt. Do not use sharp objects to scrape the ice away. Clean and dry the interior,
close the door and turn on the power to the appliance. When the power has been restored, the appliance will
start to operate but it may take some me to achieve the pre-set opera ng temperature.
NOTE: When the appliance is not in use for long periods, remove the contents and disconnect
from the electricity supply. Then clean the appliance, leaving the door ajar you wish to use
the appliance again.
7

Features
Parts And Features
1.Adiustable Temperature Control
2.Dispense Cans
6.Removable Glass Shelves
2.To replace the shelf, gently slide the shelf
back
1.Take out the handle from the box and remove
the package
the door by four pcs screw
4.Push and pull the handle to make sure
the handle is installed well
Refrigerator Interior Shelves
4.Adjustable Front Leveling Legs
1
2
4
5
6
7
8
3
1.
1
0
3
4
5
6
7
2
coldest Warmest
5.Transparent vegetable crisper
7.Tray-drip
8.Freezer
8

TROUBLE SHOOTING GUIDE
When there is something wrong with your refrigerator, check the following points before asking for
repair.
PROBLEM
CAUSE
REMEDY
The Appliance does not operate.
The Appliance is not switched
on.
Switch on the appliance.
Mains plug is not plugged in or
is loose.
Insert mains plug.
Fuse has blown or is defecve.
Check fuse, replace if necessary.
Socket is defecve.
Mains malfunc are to be
corrected by an electrician.
Appliance cools too much.
Temperature is set too cold.
Turn the temperature regulator
to warmer se temporarily.
Temperature is not properly
adjusted.
Please check the “Temperature
control” secto lear
n
how to adjust the temperature
regulator.
Food is too warm.
Door was opened for an
extended period of e.
Open the door only as long as
necessary.
A large quan of warm food
was placed in the appliance
within the last 24 hours.
Turn the temperature regulator
to a cooler seg temporarily.
The appliance is near a heat
source.
Please check the “IMPORTANT
SAFEGUARDS” secto learn
how to adjust the temperature
regulator to oset the heat
source, or  another suitable
place.
Heavy build up of frost, possibly
on the door seal.
Door seal is not air ht
(possibly aer reversing the
door).
Carefully warm the leaking
sec of the door seal with a
hair dryer (on a cool seng). At
the same e, shape the
warmed door seal by hand such
that it sits correctly.
Unusual noise.
Appliance not level.
Readjust the foot.
Appliance is touching the wall of
others.
Move the appliance slightly.
A component e.g. a pipe on the
rear of the appliance is touching
another part of the appliance or
the wall.
If necessary, carefully bend the
component out of the way.
The compressor does not start
immediately aer changing the
temperature se
This is normal, no error has
occurred.
The compressor starts aer a
period of e.
Water on r or on the
storage shelves.
This is normal because of
condensa.
Wipe r with a dry cloth.
9

FOR YOUR SAFETY
•Always check full refrigerator operation as detailed above before returning the unit as faulty.
•It is not advised to loosen any parts which are fixed by screw, contact the manufacturer for
advice.
•Do not operate the unit with a damaged cord or plug, or after the unit malfunctions, or is
damaged in any manner. Return the complete unit to the place of purchase for in-warranty
replacement, or inspection and repair.
•CAUTION: To reduce the risk of electric shock, DO NOT remove the cover (or back whilst the unit
is in operation or connected to the mains supply.
•In some products, the replacement of flexible cords by the user is not intended. Special tools are
required to safely replace the cord. Return the complete product for inspection and repair.
DISPOSAL
Environmental Protection
Waste electrical production should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
CUSTOMER SERVICE
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: [phone]
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.
DANGER!: Never try to repair a faulty –or what is thought to be a faulty machine yourself. This can
jeopardize your life or the lives of subsequent users. Leave repairs to electrical equipment to authorized
technicians.
10