CPK_Assembly_Instructions_BMK_CPK_106-29020_EN_DE_V01_03.2022
3
GBDE
Automation instructions
Assembly Instructions
Table of contents
1 Notes for the user.....................4
1.1 Area of application ................4
1.2 Warranty........................4
1.3 Manufacturer contact data ..........4
1.4 Information about these Operating
Instructions ......................4
1.5 Copyright and intellectual property
rights ..........................4
1.5.1 Markings and symbols used..........4
1.6 Retention and dissemination of these
instructions ......................4
1.7 Target group of these instructions .....4
1.8 Applicable documents..............4
1.9 General information ...............4
2 Safety instructions ....................5
2.1 Presentation and structure of
warnings........................5
2.2 Classification of the precautionary
notices .........................5
2.3 General power tool safety instructions..5
2.4 Basic safety instructions.............5
2.4.1 Cleanliness at the workplace .........5
2.4.2 Spare parts and accessories ..........5
2.5 Intended use .....................6
2.6 Misuse .........................6
2.7 Obligations of the operating company..6
2.8 Personnel qualification .............6
2.8.1 Specialist personnel for operation .....6
2.8.2 Specialist personnel for maintenance
and servicing.....................6
2.8.3 Authorised person for low-voltage
electrical equipment ...............6
2.8.4 Authorised specialist for repair and
testing. . . . . . . . . . . . . . . . . . . . . . . . . .6
3 Design and function...................7
3.1 Design. . . . . . . . . . . . . . . . . . . . . . . . . .7
3.2 Scope of supply...................7
3.3 Function ........................7
4 Transport and storage .................7
5 Assembly and commissioning ...........7
5.1 Required assembly tool .............8
5.2 Installing bench mount kit...........8
5.3 Suitable workplace ................9
5.4 Installing bench mount kit at
workplace .......................9
5.5 Inserting the tool.................10
5.6 Connecting the tool ..............10
5.7 Assembling waste container ........10
5.8 Inserting the cable-tie reel ..........10
5.9 Commissioning before each use .....11
5.9.1 Check before operation............11
5.9.2 Check after operation .............11
6 Operation ..........................11
6.1 Switching tool on and off ..........11
6.2 Inserting cable-tie strip into tool .....11
6.3 Operating tool with foot pedal ......11
6.4 Emptying waste container ..........11
6.5 Exchanging empty cable-tie reel .....11
7 Troubleshooting .....................12
8 Maintenance ........................12
8.1 Cleaning .......................12
8.2 Maintenance....................12
8.2.1 Important notes .................12
8.2.2 General maintenance activities ......12
8.3 Repair .........................12
9 Taking out of service .................12
9.1 Taking bench mount kit out of
operation ......................13
9.2 Putting bench mount kit back into
operation ......................13
10 Disposal............................13
11 Technical data .......................14
11.1 Bench mount kit CPK .............14
11.2 Tool holder .....................15
11.3 Base plate ......................15
11.4 Column........................15
12 Customer service and spare parts .......15
