Hem Alle Conference Media Table User manual

Alle Conference
Media Table
Assembly
Instruction

Alle Conference Media Table
Subtle detailing
Staan Holm repurposed traditional carpentry techniques for the design of
the solid-oak Alle Table, which features a structural beam on the underside
recalling ancient Japanese temple architecture. In this and many other ways,
the Alle Table is especially Hem: traditional modes of making reclaimed for
modern manufacture; good looks and practicality given equal consideration;
engineering and handwork combined; quality materials used liberally. Alle means
“everyone” in German, and this table is a true reflection of the design principles
we cherish. The Conference Media variation of the Alle Table comes with media
ports and hidden compartments for neat storage and cable management,
helping you work more eciently.


Parts
4 × Pins
2 × Media port covers
2 × Legs

8 × Screws
2 × Cable racks
1 × Table top
8 × Washers
2 × Cross beams
1 × Locking hinge

When ready assembled, your
table will look like this from
underneath.
In the image below you can
see where the locking hinges
of the table top will sit, keep
this in mind while
assmenbling.
Product Introduction


Step 1
Step 2
Starting with the frame, join
the cross beams with the legs
as shown on the image
below.
As shown on the picture to
the left, there is two or three
slots on each side of the cross
beams. They need to be
facing upwards and the same
direction.
For an easier assembly in
step 3, scew the whole frame
to an angle as pictured
below.


Step 3
Once the cross beams sit in
the legs correctly, secure their
position with the four pins
provided. Make sure that the
top of the pin are flush with
the metal plates they sit in.
Then, straighten the frame as
shown below in the
illustration.


Step 4
Next, turn the table top
upside down and place it on
a soft surface. Aach the
media ports onto the table
top as in the image below,
use the washers and screws
provided.
Then, make sure that the
locking hinges are parallel to
the edges of the table top.
Use the second image below
as a detailed reference.


4. Place table top
3b. Attach the cable rack with washers and screws2. Secure the frame by inserting the pins
table top table top covers cross beam
legs
cable rack T-shaped connection pins
5b. Detail
5. Secure the table top by rotating the fasteners 6. Place the covers 7. Table ready!3a. Attach the cable rack with washers and screws1. Join frame together
Step 5
Step 6
Carefully place the table top
onto the leg construction.
The pins sticking out of the
leg construction should now
sit inside the fiing holes in
the table top.
Carefully place the table top
onto the leg construction.
The pins sticking out of the
leg construction should now
sit inside the fiing holes in
the table top.


Step 7
Step 8
Put the media port covers
into place.
Your Alle Media Conference
Table is now ready
assembled!



Notes


Notes

Should you have any problems assembling your product, contact us
at inf[email protected]. We’re always happy to help!