Hemsut PX-45B Series User manual

Tablet series security and alarm device
User Manual
陈 列 出 乎 您 想 像 More Than Display
(Applied to PX-45B/PS-45B series)
一.Packing list
1.Main unit(1 set)
2.Charger(optional)
3.Remote control(optional)
4.User manual(1 pcs)
三.Description
二.Specification & parament
1.Color:White/Black
2.Material:Aluminium-magnesium alloy
3.Angle: 25°
4.Alarming:Yes
5.Charging:Yes,built-in lithium battery
6.Alarming sensing head:single contact
7.Alarming volumn:105 decibel
8.Battery Capacity:580MA
9.Charging voltage:DC 5V
10.Charging current:500MA
Tablet base
Anti-slip mat
IR receiving window
Security sensing line
with crystal connector
Security contact
Bracket
Shenzhen Ring Electronic Technology Co.Ltd.,
Address：Block 5,Zone 1,Jia de ma ruan industrial park,
Pingshan new district,Shenzhen.
Telephone：[phone] 89667005
Fax：[phone]
Website：www.hemsut.com
National uniform service line：4006-918-022

Unlock button
USB charging port
IR transmitting port
Instruction about charging
While battery is low,the light on main box
turns red.Please charge the main unit via
connecting the Mini-USB cable to USB
host on the side
Instruction about the
removal of defense
Se u
t p
Unlo ck
五.Installation
Socket for crystal
connector
Security contact on table
Mini-USB charging port
1.Take out the main unit from packing box 2.Keep the table flat and clean,
tear off the 3M tape on the bottom
5.Push and hold the"Unlock" button on
remote control about 1 second for
removing alarming
Set up
Unl ock
9.Press with proper strength the
tablet base to go into the working
status
10.Put the tablet on the anti-slipe mat
of the bracket
3.Press main unit downward with
5kg strength for fixing well on the table
6.Take out the security Sensing line
7.Take out the security Sensing lineFix
the sensing line near the crystal connector
in the clip,and plug the crystal connector
into the socket
8.Tear off the tape paper on tablet base,
and stick on the back of tablet
Mini-USB charging port
While alarming,the light on receiving window
turns green.Please push and hold "Unlock"
button about 1~2 seconds on the remote control
toward IR receiving window for removing alarming
4.Plug out the crystal connector,
meanwhile the main unit alarms
automatically
四.Function for Remote control
While pushing the "Unlock" button on the
remote control,the red LED of the middle
button is on,it means the remote control
is workable;or else,it means the remote
control needs charging. Unlo ck
Set up