IR LAB LIR-IG89 User manual

Weatherproof IR Illuminator
Model No.:LIR-IG89 （1 Panel）
Features
1. High efficiency cooling structure aluminum case, IP66
2. 20pcs super high power IR LED
3. Adjustable IR intensity
4. IR angle: 30゜(Outdoor)
5. IR distance: 200M (Outdoor)
6. Power supply: DC12V/AC24V
7. Indoor and outdoor use available
8. Dimension: ø205x127 x 135mm
Specification
Items
LIR-IG89
IP Rating
IP66(Outdoor)
Wave Length
850nm
IR Projecting Angle
30°(Outdoor)
IR LED
20pcs super high power IR LED
Emissive Power
42W
Available IR Distance
200M(Outdoor)
Control
CDS/Adjustable
Power Supply
DC12V±10%/AC24V±10%
Current Consumption
DC3000mA/ AC1850mA(Max)
Dimension
ø205x127 x 135mm
Weight
1640g
Storage Temperature
-30～+60℃
Operating Temperature
-30～+40℃
Accessories
1. IR illuminator X1 6. Hexagonal Screw Driver X1
2. User Manual X1 7. Spring Pad X2
3. 6*40 Self-tapping Screw X3 8. 6*8 Hexagonal Screw X2
4. Plastic-Conical-Anchor X3 9. Power cable X1
5. Fixing Bracket X1 10. Mounting Paper for Fixing Bracket X1
1

Function
Instruction for Fixing Bracket：
Picture 3
1. Working time of IR LED adjustable：
LUX: If want to change the working time (working Lux)
of IR Led, please open the cover at the back of the
illuminator (As showed in the following picture), the IR LED
working time can be adjusted.” – “refers to the IR LED will
start working under the darker situation. “+” refers to the IR
LED will start working under the brighter situation.
2. IR intensity of IR LED adjustable：
Current: If want to change the intensity of the IR light,
please open the cover at the back of the illuminator (As
showed in the following picture), the IR light intensity can
be adjusted.
3. LED Output：
LED Output: when IR LED on, output is DC 0V. when
IR LED off, it is DC 3V-3.3V.
4. LED Input：
LED Input: when DC 0V input IR LED is on, when DC
3V-7.5V input it is off. And CDS of this illuminator who is
connected with “LED input” does not work.
5. Power Input
When use illuminator, connect the power cable with the
power input jack of illuminator.
Picture 1
Picture 2
1. Take the illuminator out from the
package (as Picture 1)
2. Fix the bracket on the illuminator with
2pcs Hexagonal Screws and small pads
(as Picture 2)
3. Bracket fixing finished (as Picture 3)
4. Remove the film on the glass of
illuminator.
1
2
3
4
5
2