Henderson IMPERIAL PATIO KIT User manual

FITTING INSTRUCTIONS –NOTICE DE POSE –MONTAGE HANDLEIDING –
MONTAGEANLEITUNG ISTRUZIONI DI MONTAGGIO –INSTUCCIONES DE MONTAJE
Warranty.This product is covered by a 10 year manufacturer’s warranty. Please see the P C Henderson website for terms and conditions
WATCH THE INSTALLATION VIDEO
Visit: www.pchenderson.com/imperial-installation
Or scan the QR code using your phone
Specification
Maximum Door Height = 2400mm Maximum Door Weight = 200kg Maximum Door Thickness = 56mm
Tools Required
Spirit Level
Posi
Screwdriver
Power
Drill
Tape Measure
Router
Kit Contents Optional
Accessories
2 x Floor
Stop
2 x Imperial 200kg
Bottom roller
2 x Interlocker
Locking and Non
2.4 Mtr
Locking D Handle
2 x 106SS/94
Guide
Locking
1 x Lock Kit
1 x 94P Polypropylene
1 x 915B Bronze
1 x Keep Plate
Cylinder
Channel
(Not included in Slave Door Kit)
Rail
IMPERIAL PATIO KIT

Calculating Door and Opening Heights
One Fixed and One Sliding Panel
One Fixed and Two Sliding
Panels
Central Meeting Panels
Seal *
Seal *
Seal *
Seal *
KEY
DH = Door Height OH = Opening Height GC = Ground Clearance TC = Top Clearance
*= Not included in kit
PCH recommend a minimum door stile of 150mm

One Fixed & One Sliding Panel Overview
Interlocker
Door Stop
DOORS CLOSED
PCH Recommended Overhang = 130mm
DOORS OPEN
Keep
Multi point lock with D handle
One Fixed & Two Sliding Panel Overview Door Stop
DOORS CLOSED
Interlocker
DOORS OPEN
Keep
PCH Recommended Overhang = 130mm
Multi point locks with D Handle
Central Meeting Panel Overview
DOORS CLOSED
Door Stop
Door Stop
Interlocker
Interlocker
DOORS OPEN
PCH Recommended Overhang = 130mm
Keep
Multipoint lock with D handle

Component Overview
Central Meeting Panels
Component Overview
Sliding Panels to One Side

NOTE: Routing detail for all
steps must be followed to
the exact measurements
provided. Failure to so may
effect the overall
functionality and longevity of
the product.
1. Routing detail for top guide
20
Min 170
3. Routing detail for bottom roller
20
R 8
2. Attach Top Guides
4. Attach
Bottom Roller

5. Locking bar routing detail (full height)
6. Locking bar routing detail
AA
Section A- A

7. Locking bar & handle installation
Screws NOT PCH
8. Keep location routing detail (full height)
Door Or
Jamb
Door Insert

9. Keep position & installation (on central Screws NOT PCH
meeting doors), for fixed panel installation
attach keep to timber jamb
130
10. For track and channel installation
detail see Imperial 200SS Bottom
Roller fitting instructions.
10a. Reduce rail and channel length by
130mm to locate door stops top and
bottom (see overview)
11. Insert
Panels into
Frame

12. Plan view of interlocker position
12a. Install
overview between panels
Fixed panel
12
Direction of travel
Sliding Panel
Ensure correct
Orientation
13. Door stop position overview
Door
Sliding Panel
Fixed panel
stops
Direction of travel

14. Adjust door position to ensure correct running position
Door Stop
P C Henderson Ltd, Durham Road, Bowburn, Co. Durham, DH6 5NG, UK
UK Sales Export Sales
t: [phone] t: [phone]
e: [e-mail] e: [e-mail]
w: www.pchenderson.com w: export.pchenderson.com
UK Registered Address: P C Henderson Ltd, Durham Road, Bowburn, Co. Durham, DH6 5NG
Republic of Ireland Registered Address: P C Henderson Ltd, Westlink Industrial Estate, Kylemore Road, Dublin 10, Ireland
Holland Registered Address: Henderson Nederland BV, Rootven 14, 5531 MB, Bladel
600799
LVL 10
November 2019