Henderson Rustic 80 User manual

Rustic 80
FITTING INSTRUCTIONS - NOTICE DE POSE - MONTAGE HANDLEIDING - MONTAGEANLEITUNG
ISTRUZIONI DI MONTAGGIO - INSTUCCIONES DE MONTAJE
Tools Required
Contents of Kit
2M Track
3M Track
1. Mark and drill fixing holes
Tape measure
Pencil Spirit level
Power drill
Drill bits
Spanner
(x1)
(x1)
(x5) 2M
(x7) 3M
(x2)
(x2)
(x2)
(x1)
*M8x60 (x5) 2M
(x7) 3M
ST4.2x25 (x2)
*M8x25 (x5) 2M
(x7) 3M
*Alternative track fixings provided
- depending on wall type
*M8x85 (x5) 2M (x7) 3M
(x2)
Screwdriver
450mm
470mm 470mm 470mm 470mm 470mm 470mm
450mm 450mm 450mm
OH = 73mm
OH = 73mm
(OH) OPENING HEIGHT
(OH) OPENING HEIGHT
Ø10mm**
Ø10mm**
** Drill bit size subject to track
fixing/wall insert used.
50mm
50mm
50mm
OPENING
WIDTH (OW)
DW = OW +40* +40*
(DW = OW +80)
33
7
C
L
DOOR
WIDTH (DW)
DOOR HEIGHT (DH) DH = (OH +40* - 7)
OPENING HEIGHT (OH)
TRACK CENTRE = DH + 33 + 7 = (DH + 40)
*PCH Suggests 40mm overlap
of the door to the opening.
(x2)

3. Fix hangers to door 4. Floor guide routing
detail
5. Fit anti-jump cams
2.Fix M8 screw inserts, spacers and track to wall
or
6
15
*It is the installers responsibility
toensure the correct fixing/wall
insert is suitable to be used,
depending on wall type/quality.
The structure of the wall must
also be able to take the weight of
the door and system.
(x2)
6. Hang door and adjust anti-just cams
(x5) 2M
(x7) 3M
MASONARY
TIMBER/PLASTER
(x5) 2M
(x7) 3M
Not PCH
(x2)
(x2)
42
90
100
Ø10 7
1
2
290
33
66
3
40
56

7.Fit floor guide
8. Fit and adjust door stops
25.1mm
Ø6
2
1
3

Part No: 440155
February 2017 - Issue 3
P C Henderson Limited, Durham Road, Bowburn, County Durham DH6 5NG, UK. Web: www.pchenderson.com
UK Customer Services Department: Tel: [phone] Fax: [phone] Email: [email protected]
Export Department: Tel: [phone] Fax: [phone]. Email: [email protected].
For all technical queries email our Technical Department: [email protected]
9.Flush pull handle routing detail 10. Fit flush pull handle
Push Fit
Ensure clipped
12
34
111