Hercules Haulers TSMM260006 User manual

READ INSTRUCTIONS BEFORE USE
WARNINGS
• Fatal or serious crushing injuries can occur from
tip-over furniture. Push end of lever to the base
of the furniture to prevent tipping over.
• Keep hands and feet away while lowering furniture
on the trolleys.
• Do not kick or force lever under the furniture.
• Floor surfaces must be clean of dirt or dust, floors
can be damaged.
• When used outside, make sure to clean the wheels
of the trolleys before using indoors to avoid damage
to floors from dirt and debris.
• New finished wood floors must be dry before using
the product.
• Do not leave furniture unattended on trolleys.
• Do not exceed weight of 240 lbs. per trolley.
• Do not use on high pile carpets.
CARE INSTRUCTIONS
• Wipe down trolleys with damp cloth if cleaning
is needed.
Lever
Trolleys
Risers
Mini Risers
Cradle
1
1
2
2
3
3
4
4
5
5
THE MUSCLE IS IN THE BOX

3. Place lever under edge of furniture (5)
4. Press slowly on lever to lift (1)
5. Hold the trolley by the knob, insert under the leg
of the furniture (2)
6. Point arrow of the trolley in direction you would
like the furniture moved.
7. Lower the furniture down to the trolley.
8. Repeat the steps 3 - 7 for the other 3 trolleys.
9. Place close to the base of the furniture to prevent
damage and tipping
10. Remove trolleys after moving the furniture
by repeating (3 & 4)
2. Hold the trolley by the knob and place under
the edge of the furniture. (2)
3. On the trolley, point the arrow in the direction you want to
move the furniture.
4. Lower the furniture down on the trolley.
5. Repeat steps 1 - 4 for the other 3 trolleys.
6. To prevent tipping, push close to the base of the furniture (3)
7. Remove trolleys after moving the furniture by repeating (1)
Place under edge
and push down
handle to lift furniture.
Knob
Arrow
1
2
3
4
5
TO USE ON FURNITURE WITHOUT LEGS
1. Place the lever under the corner of the furniture you want to
move. Press down on the lever to slowly lift the furniture. (1)
TO USE ON FURNITURE WITH LEGS
1. Choose numbers of risers to raise the lever for height
of furniture base.
2. Stack the risers with cradle on top. Make sure risers
snap together with cradle to have sturdy fit. (4)