ShoreStation SSV30108EAC User manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 1 REV C 10/20/2008
SSV30108EAC & SSV30108EACDW
SSV30108EAC Hoist Alum SS V-Frame - EAC
69426 Hardware Box - SSV30108 Hoist
62504 Lower Frame Bundle - V30108
62864 Platform Bundle - V30108
6941301 Winch Assembly - AC - V15/V30
65021 Winch Tube Bundle - V30108
62927 Leg Bundle - V30108
HA0024 Motor Stop Bundle Alum 5” V-Frame
HA0053 Bunk Poly V30/V40108 / V30/40120
69587 Lit Packet, V30108EAC/DW
NOTE: When referencing the front of hoist, this represents the winch end. When referencing the hoist end, this represents opposite of the
winch end. Which side is also referred to the right side of the hoist.
SSV30108EAC DW Hoist Alum SS V-Frame - EAC
69426 Hardware Box - SSV30108 Hoist
62504 Lower Frame Bundle - V30108
62864 Platform Bundle - V30108
6941301 Winch Assembly - AC - V15/V30
65021 Winch Tube Bundle - V30108
67227 Leg Bundle - V30108 DW
HA0024 Motor Stop Bundle Alum 5” V-Frame
HA0053 Bunk Poly V30/V40108 / V30/40120
69587 Lit Packet, V30108EAC/DW

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 2 REV C 10/20/2008

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 3 REV C 10/20/2008

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 4 REV C 10/20/2008

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 5 REV C 10/20/2008

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 6 REV C 10/20/2008

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 7 REV C 10/20/2008
Winch Post Guide Post
Lower Frame Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 8 REV C 10/20/2008
Platform Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 9 REV C 10/20/2008
Winch Tube
WINCH TUBE SERVICE
INSTRUCTIONS
The winch tube assembly was pre-assembled at the fac-
tory. It is important that the internal parts and cable rout-
ings are assembled properly in order for the winch tube
assembly to function properly. It also requires special tools
during the assembly process. It is therefore recommended
that you contact your local dealer should you ever have
issues with the winch tube assembly.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 10 REV C 10/20/2008
Detail A
Detail A
AC Drive Winch Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 11 REV C 10/20/2008
Bunk Assembly

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 12 REV C 10/20/2008
HA0024 - Motor Stop
Adjustment
Position the hoist motor stop assembly on the hoist so it
is centered side to side on the hoist platform. Changing
the motor stop location front to rear is accomplished by
sliding the straight portion of the motor stop arm through
the U-bolts. This allows you to change the motor stop
location to best position your boat on the hoist. Once the
assembly is in the proper position, tighten the nuts on the
U-bolts.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 13 REV C 10/20/2008
DW (Deep Water) SECTION:
The deep water version of this boat hoist is assembled using
the same assembly instructions as the standard hoist. The
only items that are different between the two hoists are the
length of the upright corner posts and the adjustable legs in-
side them as identied in the drawings for deep water legs.
The water depth where your hoist is going to be installed will
determine whether you should use the deep water version
of this hoist.
The deep water version of this hoist can be used in deeper
water depths because of the additional length of the exten-
sion legs. Listed below is the amount of adjustment the vari-
ous legs have.
• A standard leg shipped with the hoist has 20” of
adjustment.
• The deep water legs have 55” of adjustment.

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003783
PAGE 30 REV C 10/20/2008
4850408
Not A Step Decal
4811312
Clamp Arrow Decal
4811319
Adj. Guage Decal
4811503
Max Load
Decal
4850363
Safety Decal
4811312
Clamp Arrow Decal
4811319
Adj. Gauge Decal
4811502
Safety Operating Decal
4850408
Not A Step Decal
SSV30108EAC Decal Placement
4811503 Maximum Load Decal - Winch Assy
4811502 Safety Operating Decal
4811312 Clamp Arrow Decal
4811319 Adj. Gauge Decal
4850363 Safety Decal
4850408 Not A Step Decal