Herman Miller Meridian Installation instructions

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Meridian are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 1
Part no. 1b9thw rev A.
YMeridian®Disassembly for Recycling
Tools Required:
Safety Glasses Rachet Wrench
Flat Screw Driver
Steps:
3. Disengage the slider and
remove.
4. Repeat step 3 to remove
rest of the sliders.
1. Pull the drawer and
remove from the slider.
2. Repeat step 1 to remove
rest of the drawers.
Where possible, plastic components are marked with ASTM recycling codes. Use
these codes to identify material type for recycling. Non marked components should
be treated as mixed plastic. Ferrous metals can be identied using a small magnet
for recycling. Non-ferrous metals should be separated and recycled separately.
Materials Identication and Segregation:

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Meridian are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 2
Part no. 1b9thw rev A.
6. Remove top surface from
body frame.
7. Using a phillip head screw
driver remove screws from
bottom frame.
8. Remove the body frame.
5. Using a phillip head screw
driver remove all screws from
body frame.

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Meridian are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 3
Part no. 1b9thw rev A.
9. Using a socket wrench
remove the glides from base
frame.
10. Using phillips head
screw driver remove screws
from drawer front.
11. Remove the front
drawer.
12. Remove the slide frame
from drawer.

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Meridian are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 4
Part no. 1b9thw rev A.
13. Using phillip head screw
driver remove 2 screws from
back side of front drawer.
14. Remove the handle from
front drawer.
15. Using Phillip head screw
driver remove 2 screws from
lock.
16. Remove the lock from
front drawer.

Z
© 2011 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Meridian are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products. 5
Part no. 1b9thw rev A.
17. Using Sledge Hammer
hit on the counterweights
and break into pieces.
18. Hand pull the caster
from base and remove.