Heston Control Grip All In One BSB530UK User manual

Registered in England & Wales No. 8223512. Due to continued product improvement, the products illustrated or
photographed in this document may vary slightly from the actual product.
Copyright BRG Appliances 2013.
BSB530UK Issue - E13
Phone: [phone]
www.sageappliances.co.uk
[e-mail]
Register your product and
get more from your purchase
Product registration takes only a few
minutes and ensures both a record
of your purchase and your warranty.
Registration also makes it easier to get
support and advice on any questions or
issues that you might have in the future.
If you wish, we can also send you free
recipes and additional hints and tips on
making the best of your appliance.
Go to www.sageappliances.co.uk
and click on ‘Product Registration’.
What’s on your mind?
Our constant aim is to improve the
quality and features of our appliances.
We welcome your comments and ideas
in assisting our ongoing development.
Go to www.sageappliances.co.uk
and click on ‘Support’.
Sage™by Heston Blumenthal‰
Customer Service Centre

TYPESET V1
BSB530UK
the Control Grip All In One™
Instruction Booklet

2
PAge heAder.....
CONTENTS
3We recommend safety first
6Getting to know your
new appliance
7Assembly & operation of your
new appliance
17 Care, cleaning & storage of your
new appliance
20 Troubleshooting
21 Food preparation chart

3
PAge heAder.....
WE RECOMMEND SAFETY FIRST
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
• Before using for the first
time please ensure that
your electricity supply is the
same as shown on the rating
label on the underside of the
appliance. If you have any
concerns please contact your
local electricity company.
• Your Sage™ by Heston
Blumenthal‰appliance
includes a BS 13 amp
moulded mains plug on
the supply cord.
• Should you need to change
this plug, please complete
the rewiring as follows
(after safe disposal of the
moulded plug).
• Please note that a cut off plug
inserted into a socket is a
serious danger risk.
• Wires are coloured as follows:
−Blue = Neutral
−Brown = Live
• As the colours of the wire
may not correspond with the
coloured markings which
identify the terminals in
your plug, please refer to the
following:
−The Blue wire must be
connected to the terminal
which is marked ‘N’.
−The Brown wire must be
connected to the terminal
which is marked with the
letter ‘L’.
• Please note that if a 13 amp
plug is used, a 13 amp fuse
should be used.
• Remove any packaging
material and promotional
stickers before using the stick
mixer for the first time.
IMPORTANT SAFEGUARDS
At Sage™ by Heston Blumenthal‰we are very safety conscious.
We design and manufacture consumer products with the safety
of you, our valued customer, foremost in mind. In addition we
ask that you exercise a degree of care when using any electrical
appliance and adhere to the following precautions.

4
PAge heAder.....
WE RECOMMEND SAFETY FIRST
• Do not place the stick mixer
near the edge of a bench
or table during operation.
Ensure the surface is level,
clean and free of water,
flour, etc.
• Do not place the stick mixer
on or near a hot gas or
electric burner, or where it
could touch a heated oven.
• If using the stick mixer
to blend hot food in a
saucepan over heat, remove
the saucepan from the heat
source and ensure the power
cord and body of appliance
are also kept away from any
heat source.
• Take care when handling
the stick mixer, attachments
and sharp cutting blades,
when emptying the bowl and
during cleaning. Remember
the blade and attachments
are very sharp and should be
kept out of the reach
of children.
• Always make sure the stick
mixer is completely and
properly assembled
before operating.
• Ensure the stick mixer is
turned off at the trigger
switch, the power is switched
off at the power outlet and
the cord is unplugged from
the power outlet before
attempting to attach any
of the accessories.
• Do not use attachments other
than those provided with the
stick mixer.
• Only use the whisk
attachment for the
recipes contained in this
instruction booklet.
• Do not use the whisk
attachment for anything
other than its intended use.
• Do not attempt to operate the
stick mixer by any method
other than those described in
this booklet.
• Do not process hot or boiling
liquids in food processor
bowl – allow liquids to cool
before placing into the food
processor bowl.
• Do not operate the appliance
continuously for more than
1 minute. Allow the motor
to rest for 1 minute between
each use.

5
WE RECOMMEND SAFETY FIRST
• Never mix dry, thick or heavy
mixtures for more than 30
seconds. Stop the operation
and stir the ingredients
before continuing. Allow the
motor to rest for 1 minute
between each use.
• When using heavy loads,
the appliance should not be
operated for more than
30 seconds.
• Always ensure the stick
mixer is turned off, the
power is switched off at the
power outlet and the cord is
unplugged from the power
outlet before attempting to
move the appliance, when
not in use, if left unattended
and before disassembling,
cleaning or storing.
• If food becomes lodged
around the processing blade
or in the blade guard, release
the ON button, switch the
power off at the power outlet
and unplug the cord. Use a
spatula to dislodge the food.
Do not use fingers as the
blades are sharp.
• Do not remove the stick
mixer from ingredients
during operation. Ensure the
appliance is switched off and
has stopped turning before
removing, to avoid contact
with moving blade or whisk.
• CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermalcut-
out, this appliance must
not be supplied through an
external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
• Do not leave the stick mixer
unattended when in use.
• To protect against electric
shock do not immerse the
motor body, cord or power
plug in water or any
other liquid.
• Keep the appliance clean.
Follow the cleaning
instructions provided in
this book.
• Do not use the stick mixer/
stick blender with wet hands.

6
• Do not push food into the
food chute with your fingers
or other utensils. Always use
the food pusher provided.
• Keep fingers, hands, knives
and other utensils away from
moving blade and discs.
• Do not place hands or fingers
in the processing bowl of
the food processor unless
the motor, processing blade,
dough blade or disc has come
to a complete stop. Ensure the
OFF button has been pressed
to switch the motor off and
the appliance is switched off
at the power outlet and the
power cord is unplugged
before removing the lid from
the processing bowl.
IMPORTANT SAFEGUARDS
FOR ALL ELECTRICAL
APPLIANCES
• Unwind the cord fully
before use.
• Do not let the cord hang over
the edge of a table or counter,
touch hot surfaces or
become knotted.
• Keep the appliance and its
cord out of reach of children.
• Young children should be
supervised to ensure that
they do not play with
the appliance.
• Do not use the appliance if
power cord, power plug or
appliance becomes damaged
in any way. If damaged or
maintenance other than
cleaning is required, please
contact Sage™ by Heston
Blumenthal‰Customer
Service on 0844 334 5110 or
go to sageappliances.co.uk.
• This appliance is for
household use only. Do
not use this appliance for
anything other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors. Do not
use outdoors. Misuse may
cause injury.
WE RECOMMEND SAFETY FIRST

7
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current not
exceeding 30mA be installed
in the electrical circuit
supplying the appliance.
See your electrician for
professional advice.
• This appliance can be used
by persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved.
• This appliance shall not be
used by children. Keep the
appliance and its cord out of
the reach of children.
The symbol shown
indicates that this
appliance should not be
disposed of in normal
household waste. It
should be taken to a
local authority waste
collection centre
designated for this
purpose or to a dealer
providing this service.
For more information,
please contact your local
council office.
WE RECOMMEND SAFETY FIRST
SAVE THESE
INSTRUCTIONS

8
PAge heAder.....
GETTING TO KNOW YOUR NEW APPLIANCE
A. Speed Control Dial
B. Easy Grip Trigger Switch
C. Motor Body
D. Processing Gear Box
E. Clear Lid
F. 1.6L Chopping Bowl
G. Feed Chute
H. Whisk
I. Stainless Steel Blending Leg
J. Variable Masher Leg
K. 4 Blade Processor
L. Variable Slicing Disc
M. Reversible Shredding Disc
N. Storage Base
O. Spindle
NOT SHOWN
4 blade processor Cover
C
E
D
F
IJ H
K
G
A
B
LN MO

9
ASSEMBLY & OPERATION
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Remove the blending
leg and wash it in warm soapy water (refer to
assembly instructions in this booklet). Rinse
and dry thoroughly.
Ensure no water remains inside the blending
leg to avoid water running into the motor
body when reattached. Disassemble and
wash the food processor bowl, bowl lid
(ensure that the removable gear box has
been removed from the lid prior to washing),
whisk, 4 blade processor, variable masher
leg and variable slicing disc in warm soapy
water, rinse and dry thoroughly. Ensure no
water remains in the food processor bowl lid
or whisk attachment to avoid water running
into the motor body when reattached.
NOTE
The detachable blending leg, chopping
bowl (without the gearbox), 4 blade
processor, variable masher, whisk can
also be washed in the dishwasher. The
whisk gear box, processor gear box,
masher gear box and motor
body are not dishwasher safe – see
the care and cleaning section of this
booklet for cleaning instructions of
these parts.
This stick mixer is a versatile appliance
that can be attached to:
• The stainless steel blending leg – for use
as a stick mixer.
• The food processor bowl with 4
blade processor, variable slicing disc,
reversible shredding disc - for use as a
mini food processor.
• The variable mashing leg – for use as
mashing vegetables.
• The whisk attachment – for use as a
hand whisk.
TO ATTACH THE BLENDING LEG
Hold the blending leg with the blades down,
and align the top end of the blending leg
with the corresponding end of the motor
body and push until the blending leg clicks
and locks onto the motor body.
Always ensure blending leg is dry, and no
water left inside, before reattaching.
USING AS A STICK MIXER
Ensure the blending leg is assembled to the
motor body as detailed above.
1. Place food to be processed into
a sufficiently large mixing bowl
or saucepan (do not use the food
processor bowl as this may damage
either the stick mixer or the bowl).
The bowl should only be ½ full or
less when blending liquids
or when making a puree of fruit
and/or vegetables.
2. Insert the plug into a 230V power
outlet and turn the power on.
3. Turn the dial at the top of motor
body, select a speed from 1 to 15.
NOTE
If selecting a higher speed, it is
recommended that you start on
a slow speed and then increase to
high speed to avoid splattering and
over-processing.

10
ASSEMBLY & OPERATION
4. Place the blending leg as deeply as
possible into the bowl and press the
trigger switch to turn the stick mixer
on. The button must be held for the
required duration of operation.
5. Work through the ingredients in
the bowl with a gentle raising and
lowering motion.
6. Switch off the motor by releasing the
trigger switch.
7. Ensure the motor has completely
stopped before lifting the blender
out of the bowl.
8. When processing has finished,
switch off at the power outlet and
remove the power plug.
TO DETACH THE BLENDING LEG
Ensure the trigger switch is released, the
power is turned off at power point and the
appliance is unplugged. Hold the motor
body with one hand, and using thumb and
finger of the other hand, press on the two
EJECT buttons on either side of the motor
body. Pull the motor body away from the
blending leg to detach.
RECOMMENDATIONS WHEN USING
AS A STICK MIXER
• The stick mixer blends foods and
liquids rapidly, therefore it is easy to
over process. Remember when using the
blending leg to stop the stick mixer and
check food throughout the operation.
• Use caution when blending hot food as it
can splatter.
• The stainless steel blending leg allows
for hot food to be processed directly
in the saucepan. This makes blending
soups and sauces very easy.
• For safety reasons remove saucepan
away from the heat before processing.
• Ensure the body of the appliance and
power cord are kept away from any
heat source.
• When pureeing and blending, cut food
into uniform sizes. This will ensure
smooth and consistent results.
• Warm all liquids to be added to
soups and purees, this will ensure
even blending.
• Do not operate the appliance
continuously for more than 1 minute.
Allow the motor to rest for 1 minute
between each use.
If food becomes lodged around the
processing blade or in the blade guard,
follow the safety instructions below:
1. Release the trigger switch, the power
off at the power outlet and unplug
the cord.
2. Use a spatula to carefully dislodge
the food. Do not use fingers as the
blades are sharp.
3. After the food has been removed and
blades are clear, plug the appliance
back into the power supply, switch
the power on and continue blending.

11
ASSEMBLY & OPERATION
USING THE FOOD
PROCESSOR BOWL
ATTACHING GEARBOX TO FOOD
PROCESSING BOWL LID
The gearbox should be placed into the food
processor lid. It should click into place.
To attach the motor, click into place onto
the gearbox.
TO ATTACH THE FOOD
PROCESSING BOWL, FOOD
PROCESSOR ATTACHMENTS
AND LID
1. Remove the food processing bowl from
the storage unit and place onto a bench
ensuring that the surface is clean
and level.
2. Choose one of the following food
processor attachments:
a) 4 blade processor
b) Adjustable slicer
c) Reversible shredder
3. There is a common spindle that is
used across all of the three food
processor attachments.
WHEN USING THE
REVERSIBLE SHREDDER
1. Place the spindle, into the centre of the
food processing bowl.
CAUTION
Caution should be taken when
handling the shredding disc.

12
ASSEMBLY & OPERATION
2. Holding the reversible shredder disc,
notice that there is a large grater
and small grater, place the side you
require up. Place over the centre
of the spindle and ensure that it is
pushed down firmly.
3. Place the lid into position and ensure
that it is on correctly.
WHEN USING THE
ADJUSTABLE SLICER
1. Place the spindle in the centre of the
food processing bowl.
CAUTION
Caution should be taken when
handling the adjustable slicing disc
and ensure that blade is in the storage
or 0 position.
2. The adjustable slicing disc has
18 precise settings. To adjust the
settings hold the adjustable slicing
disc by the edge (on the opposite
side to the cutting blade) with one
hand and turn the rotating collar to
the desired setting with the
other hand.
3. Place the adjustable slicing disc onto
the spindle. Ensure that it is pushed
down correctly.

13
ASSEMBLY & OPERATION
4. Place the lid into position and ensure
that it is on correctly.
WHEN USING THE
4 BLADE PROCESSOR
1. Using care, hold the 4 blade
processor in one hand, with the other
hand, place the spindle through the
centre of the 4 blade processor from
underneath. The quad should self-
locate at the base of the spindle. The
4 blade processor will sit loosely on
the spindle but will lock into place
during processing.
CAUTION
Caution should be taken when
handling the 4 blade processor as the
blades are extremely sharp.
2. Place the 4 blade processor and
spindle into the centre of the food
processing bowl.
3. Place the lid into position and ensure
that it is on correctly.
4. Once the blade or disc has been
selected for the food processor you
can now process food. Place the food
inside the processing bowl. If using
the 4 blade processor. Do not exceed
the maximum (MAX) marking.
5. Insert the gear box into the lid of the
food processor.
NOTE
Always place the 4 blade processor
into the food processor prior to
placing the food into the food
processor. When using the disc’s
adjustable slicer and reversible
shredder these both can be placed
into the food processor prior to
processing food. Some foods, such as
nuts, can stop the 4 blade processor
from engaging the built in safety
mechanism. If you have troubles
closing the lid with ingredients such
as this we advise to load these through
the feed chute.

14
ASSEMBLY & OPERATION
4. Feed the food through the feed chute
of the food processor, using the food
pusher to push it down.
CAUTION
Only use the small pusher with
the large pusher resting inside the
feed chute.
5. When processing has finished switch
off the motor by releasing the trigger
switch, switch off at the power outlet
and remove the power plug.
6. Detach the food processing bowl and
lid (refer to instructions). Remove
the lid from the food processor
bowl. Carefully remove the food
processing blades or 4 blade
processor and use a spatula to scrape
off any attached food back into food
processing bowl.
TO USE THE FOOD PROCESSOR
For food preparation tips and recipes refer to
the recipe section of this booklet.
1. Insert the plug into a 230V power outlet
and turn the power on.
2. Select a speed between 1–15 on the
speed control dial.
3. Press the trigger switch to turn
the appliance on and start the
processing action.

15
TO DETACH THE FOOD
PROCESSING BOWL AND LID
Ensure the switch is released, power is
turned off at power point and the appliance
is unplugged.
Hold the motor body with one hand and
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the chopper bowl lid to detach.
TO DETACH THE GEARBOX
FROM THE LID
• To remove the gearbox grasp
the gearbox and lift up from the
processing lid.
ASSEMBLY & OPERATION
RECOMMENDATIONS WHEN USING
THE STICK MIXER WITH THE FOOD
PROCESSING BOWL
• Do not operate the stick mixer when the
food processing bowl is empty.
• The bottom of the food processing bowl
features a anti-slip rubber rim. This
keeps the food processing bowl stable,
however it is recommended during
processing to hold the motor body with
one hand and the food processing bowl
and lid with the other.
• When processing, cut food into uniform
sizes to ensure quicker, even and more
consistent results.
• The stick mixer blends foods and
liquids rapidly, therefore it is easy to
over process. Remember to check food
throughout the operation.
CAUTION
DO NOT process hard foods such as
coffee, grains or chocolate in lumps, as
damage to the blade may result.
DO NOT process boiling or hot foods in
the food processing bowl.
NEVER remove the blade from the bowl
before food processing is completed.
NOTE
When using the shredding or slicing
disc do not allow the processing bowl
to fill with food beyond the MAX level
indicated. Processing food beyond
this level could damage parts of the
bowl and lid

16
USING THE VARIABLE POTATO
MASHING LEG
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Wash blade and two
parts of the mashing leg before use.
CAUTION
Never immerse the motor body or
gearbox in water or any other liquid.
ASSEMBLY OF THE MASHING LEG
1. Hold the outer leg and insert the
gearbox making sure ALIGN arrows
are aligned.
2. Hold both outer leg and gearbox
firmly with one hand and insert inner
leg until it clicks into place.
ASSEMBLY & OPERATION
3. Holding gearbox twist outer leg to
lock.
4. Align the mashing leg with the
motor body and push the two parts
together until it clicks.
5. Place blade on underside of the
mashing head. To lock the blade
rotate in a counter-clockwise
direction. Blade will not attach if the
leg is not attached to the motor body.

17
ASSEMBLY & OPERATION
TO USE THE POTATO MASHER LEG
For food preparation tips and recipes
refer to the recipes section. Ensure the
potato masher is completely and properly
assembled.
1. Place food to be mashed into a
sufficiently large mixing bowl
or container.
2. Insert the plug into a 230V power
outlet and turn the power on.
3. Select the desired setting on the
variable mashing leg.
4. Select a high speed on the speed
control dial.
5. Place the potato masher into food
and press the trigger switch to turn
the masher on.
6. Move the masher through the
ingredients with a gentle raising and
lowering action until desired texture
is achieved.
7. Switch off the motor by releasing
the trigger switch before lifting the
masher out of the bowl. Switch off
at the power outlet and remove the
power plug.
TO DETACH THE POTATO
MASHING LEG
Ensure the trigger switch is released, the
power is turned off at power point and the
appliance is unplugged.
Hold the motor body with one hand, and,
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the masher to detach.
RECOMMENDATIONS WHEN USING
WITH THE POTATO MASHING LEG
• Release the trigger switch and ensure
the masher has completely stopped
turning before removing the masher
from the food during operation.
• Place the mixing bowl on a damp cloth
during mashing. This will keep the
mixing bowl stable.
USING AS A WHISK
Remove blending leg from motor body
(follow the instructions “To detach the
blending leg”).
1. Align the whisk gear box to the hole in
the underside of the motor body and
push the whisk in until it clicks and
locks into place.

18
TO USE THE WHISK
For food preparation tips and recipes refer
to the recipes section. Ensure the whisk is
completely and properly assembled.
1. Place food to be processed into a
blending jug or a sufficiently large
mixing bowl or container.
2. Insert the plug into a 230V power
outlet and turn the power on.
3. Select a speed between 1–15 on the
speed control dial.
4. Place the whisk into food and
press the trigger switch to turn the
whisk on.
5. Move the whisk through the
ingredients with a gentle raising and
lowering action until desired texture
is achieved.
6. Switch off the motor by releasing
the trigger switch before lifting the
whisk out of the bowl. Switch off at
the power outlet and remove the
power plug.
TO DETACH THE WHISK
Ensure the trigger switch is released, the
power is turned off at power point and the
appliance is unplugged. Hold the motor
body with one hand, and, using thumb and
finger of the other hand, press on the two
EJECT buttons on either side of the motor
body. Pull the motor body away from the
whisk to detach.
ASSEMBLY & OPERATION
RECOMMENDATIONS WHEN USING
THE WHISK ATTACHMENT
• Do not allow the whisk to hit the bottom
or sides of mixing bowl while the
appliance is in operation, as this may
damage the whisk.
• To incorporate air into the ingredients
when whisking, use a sufficiently deep,
wide container and move the whisk
through the ingredients with a gentle
raising and lowering action.
• Release the trigger switch and ensure
the whisk has completely stopped
turning before removing the whisk from
the food during operation.
• Place the mixing bowl on a damp cloth
during whisking. This will keep the
mixing bowl stable.
• Always use fresh chilled cream and
fresh eggs at room temperature to
achieve greater and more stable volume
when whisking.
• Always ensure the whisk and mixing
bowl are completely clean and free of fat
before whisking egg whites.
• It is recommended to use the highest
speed when whisking egg whites
and cream.

19
CARE, CLEANING & STORAGE
MOTOR BODY
To remove any food residue wipe the motor
body and cord with a damp cloth only.
Do not use abrasive cleaners or steel wool.
Never immerse the motor body in water or
any other liquid. Do not place motor body
in dishwasher.
BLENDING LEG
Before cleaning, turn the power off at the
power outlet and then remove the plug.
Remove the motor body from the stainless
steel blending leg. The stainless steel
blending leg can be hand washed in hot
soapy water, rinsed and dried thoroughly
after each use. Alternatively, the blending
leg can also be washed in the dishwasher.
Do not use abrasive cleaners or steel wool.
QUICK WASH: Between each processing
task, with the motor body attached and
turned on at the power outlet, place the
stainless steel blending leg and blade
assembly only in to a jug of water and press
the trigger switch to turn on for 5 seconds.
This will remove any food on the blade and
leg and allow you to continue onto the next
processing task.
FOOD PROCESSING BOWL, FOOD
PROCESSING BOWL LID, 4 BLADE
PROCESSOR, ADJUSTABLE SLICING
DISC & REVERSIBLE SHREDDER
Before cleaning, turn the power off at the
power outlet and then remove the plug.
Remove the motor body from the food
processing bowl lid and gear box. Remove
the food processing bowl lid and quad
blade | processing discs from the food
processing bowl.
NOTE
The lid is dishwasher safe remove the
removable gear box from the lid prior
to placing in the dishwasher.
The food processing bowl, bowl lid, 4 blade
processor and processing discs should be
hand washed in hot soapy water, rinsed
and dried thoroughly after each use.
Alternatively, the food processing bowl,
bowl lid, 4 blade processor, adjustable
slicing disc and reversible shredder can also
be washed in the dishwasher. The 4 blade
processor comes with a cover for your safety.
This cover can be used on the blade in the
dishwasher. Do not use abrasive cleaners or
steel wool.
CARE & CLEANING OF THE
GEARBOX
The gearbox should always be removed from
the lid prior to any cleaning.
The gearbox lifts out of the lid by pulling
it up.
NOTE
The gear box is not dishwasher safe
and should never be immersed in
liquid at all.
To clean the gearbox, remove from the
lid and wipe down with a damp cloth
only. Do not use abrasive cleansers or
steel wool.