HFX 600 VISTA GP User manual

Package contents:
remote, batteries, manual, external remote, internal USB cable
IR receiver cable, mounting material
1

external use:
put it into the external USB and please the external IR receiver,
so that you can point to it easily ith your remote
2

internal use:
for internal use you have to open the IR receiver box
3

4

Put the velcro underneath the IR receiver board
5

Bend the red LED into an upright position
6

Remove the external USB cable and connect ith the internal
USB cable.
7

8

Place the board behind
a hole in the front
9

If you need to place the IR receiver on a different place
than the receiver board, please remove the sensor.
10

Connect the internal receiver cable to the IR and to the board
11

To prevent from shortcuts, please protect the sensor ith
a shrink foil.
12

Stick the double-sided sticker to the sensor.
13

Add a cable binder to the sensor.
14

Place the sensor behind the front of the PC.
15

Also in narro and
difficult places.
16