hi-fortune HY603 User manual

Multifunctional Electric Patient
Instruction manual
Please read it carefully before using
Model HY603

Multi-functional lifting chair for easy transfor of bedridden
patients
The applicable population is the disabled, the sick and the
elderly and infirm who have difficulty in mobility. It is widely

Content
1 . Safety
instructions.............................................................................1
2 . Parts
introduction.............................................................................1
3 . Technical
Parameters.............................................................................2
4 . Installation
instructions.............................................................................3
5 . User's
Guide.............................................................................5
6 . Basic maintenance and
maintenance...............................................................10
7 . Simple
troubleshooting ...................................................................10
8 . Product warranty
card.......................................................................11

1.Safety instructions
一.使用产品前
1. 按照说明书组装产品；
2. 电池充电至少4个小时直至满格；
3. 仔细研究所有手册并完全理解；
4. 产品使用者接受适当的指导和培训；
5. 不同的使用情况下，选择正确的型号，尺寸，材料，吊具和附件，确保安全满足病
人需求。
a warning statement to the effect that "WARNING : Use of
accessories,transducers and cables other than those specified or provided by
the manufacturer of this equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this equipment and
result in improper operation."
2.Parts introduction
1. Backrest; 2. Right armrest; 3. Left armrest; 4. Suspender; 5. Seat cushion; 6. 3" front
wheel; 7. Support leg; 8. Right rear wheel bracket;
9. 4" rear wheel with brake; 10. Pedal; 11. Motor; 12. Connecting rod; 13. Caster pad; 14.
Left rear wheel bracket;
15. Fixing screws; 16. Bushing; 17, lifting frame; 18. Control box/motor; 19. Handle; 20/21,
bedpan/bowl holder;
22. Support feet; 23. Long latch; 24. Short latch; 25. Hand control
- 1 -

3 . Technical Parameters
● Dimensions: 900*676*870
● Product net weight: 45 Kg
● Lifting range: 0~250mm
● No-load lifting speed: 7.6mm/s
● Drive mode: motor push rod
● Charging power supply: AC220V/50Hz
● Load weight: 150Kg Max
● Waterproof grade: ordinary splash
● Noise: 65 (dB)
● This product is a mobile lift. It does not need to be plugged in to use,
just fully charge the control box to use it.
It can be moved to each room for use, and the number of lifts when
fully charged is about 60 times (according to the person's weight)
- 2 -

4 . Installation instructions
1. Unpacking acceptance
Please check whether the host and accessories are missing (accessories
are subject to the accessory list provided). If there is any loss or missing,
please contact the dealer or our company in time.
Lift body x 1set
armrest x 1set
Bedpan/potty
Long bolt x 2
Short bolt x 2
2. Installation steps
Step 1: Install the support legs
① Lift the body of the lift
out of the carton.
Hard seat cushion x 1
piece (optional)
Foam backrest x 1
piece (optional)
②Open the support legs
and place the lift upright.
③Untie the straps and
open the support legs.
④Insert the long plug
into the mounting hole. ⑤The plug is installed in place,
and the operation on the left and
the operation on the left and right
sides is the same.
- 3 -
Charging Cable x
⑥ Put away the supporting
feet.

Step 2: Install the handrails
The red button of
the buckle is facing
outward
- 4 -
①区分左右扶手。
②Insert the left and
right armrests into the
③Insert the short plug
④Complete.

5 . User's Guide
1. Use of hand controller
Use the up and down buttons on the hand controller to control the up
and down of the main frame, release the button to lift and stop the
movement.
- 5 -
2. Emergency stop button function
The emergency stop button is to interrupt and turn on the power
supply, so that the motor will stop working immediately in case of
sudden danger.
Close: Press the red button, as shown in Figure 3-1, the control
device is closed;
Turn on: Turn the red button clockwise, as shown in Figure 3-2, the
control device works normally.
Strong recommendation: press this button when the device has not
been used for more than 3 days. In this way, the battery in the battery
box can be kept long-lasting.
3-13-2
Overload
Battery
UP
DOWN

3. Connection of control equipment
This device has 4 sockets in total.
Hand control socket
Charging cable
Motor 1
Motor 2 socket (optional)
7. Operation of the lift
Step ①: The patient sits on the edge of
the bed with a sling underneath.
Step ②: Push in the lift, brake
the front wheel, and buckle the
- 6 -
4. Opening and braking of rear wheels
Step on brake
Step on release
Note: The support feet must be stowed during use, otherwise the support feet will be damaged.

Step ③: Install the backrest, raise the
- 7 -
Bath
Toilet
toilet stand
Sofa
Wheelchair
Step on
close
Step on
open
Note: To move to a wheelchair, the wheelchair footrest needs to be turned to the outside or removed.

8. Storage of the lift
When the lift is not in use, the lift can be simply disassembled and put
away so that it will not occupy a large space and be placed in an unused
place or the trunk of the car. The specific steps are as follows:
①Pull out the latches on the left
and right armrests
②Remove the left and
right armrests
③Open the
support feet
④Pull out the latches of
the left and right support
legs, fold the support legs,
⑤Complete the disassembly, pay attention to the storage of
the installation accessories
- 8 -

9. Battery charging
When the battery power is only 1 bar, it needs to be charged
immediately. If it is not charged, the motor will not work (the battery
power is shown in the figure).
100% battery
75% battery
Note: 1. When charging, please turn off the emergency stop button and
then charge again, the charging state of the lift is in the off state;
2. When the lift is not in use for a long time, it is generally charged once
every other month;
3. Do not charge in a humid environment;
4. If the lift is not used every day, it is recommended to turn off the
emergency stop button, so that the current can be disconnected and the
battery power can be saved.
- 9 -
50% battery
25% battery

6 . Basic maintenance and
For safe and barrier-free operation, perform the following routine
inspections before use every day:
1. Visually inspect the elevator for external damage or wear;
2. Check whether the screws and fixing nuts on the armrests are
tight;
3. Check whether the safety hook on the armrest is normal;
4. Check the manual control and whether the motor lifting
function is normal.
If necessary, use warm water or alcohol to clean the elevator to
ensure that the wheels are free of dust and hair.
Notice! Do not use chemicals containing phenol and chlorine,
which will damage plastic powder and plastic materials.
Transport and storage
Press the emergency stop button during transportation or when
using the equipment internally for a period of time. The storage
environment temperature should be higher than 0℃, and the
normal relative humidity (≤60%).
an examination
Complete inspection at least once a year. Pay special attention
to the parts where wear occurs, such as connections, bolts, etc.
- 10 -

8. Product warranty card
1. Description of warranty scope
From the date of leaving the factory:
(1) The control box will be replaced within six months, and the warranty
will be within 1 year.
(2) The battery will be replaced if the battery content is less than 60% of
the rated capacity for half a year.
(3) The remaining parts provide free maintenance within one year.
(4) Wheels, step pads, and plastic parts (vulnerable parts) are not
covered by the warranty period.
If it is damaged during use, please contact the dealer.
(5) If there are mass quality problems, the company is responsible for
sending someone to repair or recall.
(6) Provide paid service after one year.
2. The following conditions will not be guaranteed
1. Failure to follow the instructions to use and maintain the correct
operation method and damage.
2. Failure to use spare parts produced by regular manufacturers has
caused parts to be damaged.
3. An accident occurred and the parts were damaged.
4. Consumables are not covered by the warranty. Consumables mainly
refer to wheels, slings, etc.
5. Unauthorized modification of device settings is not allowed.
6. Natural disasters such as typhoons, floods, and earthquakes.
- 11 -
7 . Simple troubleshooting