Hi TV TwinView User manual

OT01015310-061212
DVD / CD / VCD / CD-R / CD-RW RECEIVER
EJECT
Before operating the unit, please read these instructions carefully
DVD/CD Player
Operating Instructions
Operating Instructions
In-Dash Single Disc
Welcome ...................................................................................................................
IMPORTANT NOTES ................................................................................................
INSTALLATION GUIDE ................................................................................................
Precautions ..............................................................................................................
BACK PANEL ..............................................................................................................
FRONT PANEL CONTROL REFERENCE GUIDE ......................................................
REMOTE KEY ...............................................................................................................
REMOTE FUNCTION ...................................................................................................
DVD OPERATE ............................................................................................................
DVD BASIC OPERATION ............................................................................................
DVD playback ..........................................................................................................
Next track or previous track .....................................................................................
Play / Pause .............................................................................................................
Stop ..........................................................................................................................
Repeat mode ............................................................................................................
Camera angle ...........................................................................................................
Subtitle .....................................................................................................................
DVD menu ................................................................................................................
Title menu ................................................................................................................
DVD DISP function ...................................................................................................
DVD TYPICAL SETUP MENU AND CONFIGURATION ..............................................
PRODUCT SPECIFICATION ........................................................................................
REGION MANAGEMENT INFORMATION ...................................................................
Content:
01
01
03
03
03
04
04
05
08
09
09
09
09
10
10
10
10
11
11
11
12
17
18

Welcome
Thank you for the purchase of this DVD player. Before operating the unit, please read this
manual thoroughly and retain it for future reference.
IMPORTANT NOTES
To prevent short-circuiting of the electrical system and thereby causing serious damage to the
unit or the vehicle, you are advised to follow the instructions carefully.
Should there be requirement to replace blown fuse, do remember to disconnect all power
supply and switched off the unit before replacing it with a new one. Use only correct rating
fuse to avoid damaging the unit.
During operation, if there is symptom of over-heating or system malfunction, do switch off the
unit and consult your dealer immediately. Please do not attempt to open up the unit since
there is no serviceable parts inside.
This product utilizes a laser. Do not remove the cover. Use of controls or adjustments or
performance of procedure other than those specified herein may result in hazardous radiation
exposure.
To reduce the risk of fire or shock hazard, do not expose this equipment to rain or moisture.
This unit is designed using high quality electronic components and manufactured under stringent
quality control system. The system unit will provide many hours of quality performance if use
correctly. Do follow the maintenance procedure below:
The battery life of the remote control unit is about six months long. To ensure effective control,
please replace the batteries regularly. Do not use new and used batteries at the same time to
avoid damaging the good battery.
Do not use any chemical solvent, cleaning agent or corrosive detergent to clean away dirt on
the surface of the bezel. By so doing, you may cause irreversible damage to the surface. To
clean off dirt or fingerprints, we recommend the use of a soft damp lens cleaning cloth.
Ensure no metal or foreign materials are dropped into the cabinet. Switch off the unit and
contact your dealer immediately should anything falls into the unit.
Allow adequate air circulation to prevent internal heat buildup. Do not install unit near heat
sources such as radiators or air ducts, or in a place subject to direct sunlight or excessive
dust. If the internal temperature of the vehicle is extremely high, do allow a short cooling
down period before operating the unit.
Keep unit away from equipment with strong magnets such as large loudspeakers.
01 02
Use only correct size of fasteners or connection cable during installation. Failure to comply
with this requirement may create fire hazard.
Kindly refer to authorized dealers if in doubts.
When installing this unit together with display monitor, please check that you are
in compliance with your local traffic rules and regulations.
This product incorporates copy right protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is
intended for limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under License from Dolby Laboratories. “Dolby” and double-D
symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
© 1992-1997 Dolby Laboratories. All rights reserved.

03 04
INSTALLATION GUIDE
Precautions:
1. This unit should be install by qualified technician or service personnel.
2. This product is designed to operate with a 13.2 VDC, negative ground battery system.
3. Disconnect the ground wire from the battery terminal before connecting this unit to the
electrical system.
4. The wiring from some other products or accessories might bear similar color code to this
product but however they might of different function. It is always advisable to refer to the
electrical connection diagrams of products or accessories before installation to avoid wrong
connection.
5. Use proper insulation and fastening materials to prevent electrical short-circuiting.
6. Do not connect the yellow wire of this product directly to the battery terminal. Do remember
to connect the red wire of this product to the ACC of the ignition key switch. Failure to do so
may result in draining off the battery charge prematurely.
7. Use only supplied accessories to avoid damaging the unit during installation.
8. Do not install this product at an incline angle exceeding 30 .
9. Do not install this product at a position that may cause injuries to the passenger(s) during an
accident.
Audio Output
Red : Audio R
White : Audio L
Yellow : Video
Yellow : BATT
Red : ACC
Black : GND
IR Input
(11OT4100001)
POWER
DC Plug AC Socket
AV OUT
R L V
IR
1
2
3
4
5
6
7
8
9
10
11
12
13
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
14
15
16
17
18
FUNCTION KEYS
DVD / CD / VCD / CD-R / CD-RW RECEIVER
EJECT
FRONT PANEL CONTROL REFERENCE GUIDE
21 3 4 65
8
7
1
2
3
4
5
6
7
8
Earphone
Power Indicator
Mute Button
Infrared Remote Controller Receiver
Previous Track Button
Next Track Button
Eject Button
Play & Pause Button
[1] Power
[2] Mute
[3] Mode(No avail)
[4] Up
[5] SYS Menu(No avail)
[6] Enter
[7] Left
[8] Down
[9] Insert/Eject
[10] Stop
[11] Play/Pause
[12] 0........9
[13] Fast Reverse Play
[14] Slow
[15] Subtitle
[16] PBC On/Off
[17] Display
[18] Search
[19] DVD Volume Decrease Button
[20] DVD Volume Increase Button
[21] Adjust(No avail)
[22] Right
[23] Scan(No avail)
[24] Memory (-/+)
[25] Prev TRK.
[26] Next TRK.
[27] DVD Menu
[28] Title
[29] Fast Forward Play
[30] Repeat
[31] Angle
[32] MTS
[33] DVD Zoom
[38] DVD Setting
BACK PANEL
The figure below shows the back panel design for the player. It also indicate the wire definition
for interconnection.

05 06
REMOTE FUNCTION REMOTE FUNCTION
1
2
3
4
5
6
7
8
9
10
11
12
13
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
14
15
16
17
18
[1] Power
Press [ POWER ] button to ON / OFF system (both ON/OFF Digital-Broadcast-Video)
[2] Mute
Press [ MUTE ] button to toggle ON/OFF the system audio.
[3] Mode
No avail.
[4] Up
In DVD mode, press [ UP ] button to move cursor to up sub-menu.
[5] SYS Menu
No avail.
[6] Enter
Press [ ENTER ] button to select/accept settings.
[7] Left
In DVD mode, press [ LEFT ] button to move cursor to LEFT sub-menu.
[8] Down
In DVD mode, press [ DOWN ] button to move cursor to down sub-menu.
[9] Insert/Eject
Press [ EJECT/INSERT ] button to eject/insert DVD/CD disc.
[10] Stop
Press [ STOP ] button to STOP DVD playback.
[11] Play/Pause
Press [ PLAY / PAUSE ] button to PLAY or PAUSE DVD playback.
[12] 0........9
Numeric keys.
[13] Fast Reverse Play
Press the [ FF ] button during playback. Each time this button is pressed, the unit
will go into a rapid advance playback mode.The OSD will be shown on the TV screen,
depending on the speed of the playback selected.
[14] Slow
Press [ SLOW ] button to setting DVD display mode (SF 2X,SF 4X,SF 8X).
[15] Subtitle
Press [ SUBTITLE ] button to toggle ON/OFF DVD subtitle.
[16] PBC On/Off
Press [ PBC ON/OFF ] button to restart the DVD play mode (Disc Dependent).
[17] Display
Press [ DISPLAY ] button to show DVD playback information.
[18] Search
Press [ SEARCH ] button to search DVD palyback.
[19] DVD Volume Decrease Button
Press [ VOLUME DECREASE ] button to decrease volume.
[20] DVD Volume Increase Button
Press [ VOLUME INCREASE ] button to increase volume.
(SR 2X,SR 4X,SR 8X).

07 08
REMOTE FUNCTION REMOTE FUNCTION
1
2
3
4
5
6
7
8
9
10
11
12
13
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
14
15
16
17
18
[21] Adjust
No avail.
[22] Right
Press [ RIGHT ] button to move cursor to right sub-menu.
[23] Scan
No avail.
[24] Memory (-/+)
No avail.
[25] Prev TRK.
Press [ PREV TRACK << ] button to select PREV TRACK / CHAPTER.
[26] Next TRK.
Press [ NEXT TRACK >> ] button to select NEXT TRACK / CHAPTER.
[27] DVD Menu
Press [ DVD MENU ] button to select DVD MENU or toggle VCD PBC ON/OFF.
[28] Title
Press [ TITLE ] button to select DVD title (Disc Dependent).
[29] Fast Forward Play
Press the [ FF ] button during playback.Each time this button is pressed, the unit will
go into a rapid advance playback mode. The OSD will be shown on the TV screen,
depending on the speed of the playback selected.
[30] Repeat
Press [ REPEAT ] button to select DVD repeat mode.
[31] Angle
Press [ Angle ] button to select DVD display angle (Disc Dependent).
[32] MTS
Press [ MTS ] button to change DVD display language (Disc Dependent).
[33] DVD Zoom
Press [ DVD Zoom ] button to select DVD display mode.(Zoom x1.5, Zoom x2,
Zoom x3, Zoom OFF)
[38] DVD Setting
Press [ DVD Setting ] button to select DVD set up.
DVD / CD / VCD / CD-R / CD-RW RECEIVER
EJECT
Before put the disc into the DVD slot, make sure the monitor is in DVD mode and disc recorded side
should be faced down (the printed side should be faced up) as below.
DVD OPERATE

09 10
DVD BASIC OPERATION
* DVD playback (DVD)
(1) DVD playback commences.The disc will start to play if disc does not have any menu recorded
on it.If disc has one or more titles recorded on it, a menu screen will appear on the monitor.
* The monior will display “NO DISC” if there is no disc in the case.
(2) Press / / / on remote to select preferred title.
(3) Press the "ENTER or " button, the selected item will now start playing.
Press the "MENU or TITLE" button, the menu screen will appear on the monitor.
* Next track or previous track (DVD/CD)
Press ( ) during playback
Audio CD
The player will skip forward to the next track each time the button is pressed. "NEXT 01/16" will
display on the TV screen.
DVD
The player will skip forward to the next title / chapter each time the button is pressed.
“ TITLE 01/06 CHAPTER 001/006 ” will display on the TV screen.
Press ( ) during playback
Audio CD
The player will skip to the beginning of the previous track each time the button is pressed.
“PREVIOUS 01/16” will display on the TV screen.
DVD
The player will skip to the beginning of the previous chapter each time the button is pressed.
* Play / Pause (DVD/CD)
Press the "PLAY/PAUSE" ( ) button, during playback. The player will be placed in the pause
mode.
Press the "PLAY/PAUSE" ( ) button again, the player will return to normal playback.
* Repeat mode
For Audio CD
When REPEAT button on the remote is pressed,
REP ONE = The current track will be repeated
REP ALL = All the track will be repeated
REPEAT OFF = Repeat mode will be switched off
For DVD
When REPEAT button on the remote is pressed,
CHAPTER REPEATION = The current chapter will be repeated
TITLE REPEAT = The current title will be repeated
REPEAT OFF = Repeat mode will be switched off
* Camera angle (DVD)
Some DVD discs may contain scenes, which have more than one viewing angle.For these
discs,
the same scene can be viewed from a different angle by using the "ANGLE" button.
(1) During DVD playback, press the "ANGLE" button on remote. “ x / y” will appear, x
represents the current camera angle, and y represents the total available camera angle.
(2) Press the ANGLE button on remote until the preferred angle is selected. The ANGLE
selection will cycle through all available camera angle.
Note: This function will only work on discs where different camera angles have been recorded.
* Stop (DVD/CD)
(1) During Audio CD playback, when "STOP" ( ) button is pressed, the CD playback will stop.
(2) During DVD playback, when the "STOP" ( ) button is pressed, press "PLAY / PAUSE ( ) "
button to continue. The player records the point where the "STOP" ( ) button is pressed
(Resume playback function).
Press the PLAY / PAUSE ( ) button again, the play will resume from this point.
If "STOP" ( ) button is pressed. “STOP ” will apppear and the resume playback function
will be cleared.
Note: R esume playback function is not available for Audio CDs.
* Subtitle (DVD)
During DVD playback, you may change the subtitle language from the one selected at the initial
setting to a different language, if available.
(1) Pressing "SUBTITLE " button, the following will appear.
SUBTITLE 01/03 :ENGLISH SUBTITLE 01/03 :FRENCH SUBTITLE 01/03 :SPANISH SUBTITLE OFF

11 12
DVD BASIC OPERATION
(2) During DVD playback and SUBTITLE ON, press the "SUBTITLE" button."SUBTITLE x / y" will
appear, x represents the current subtitle and y represents the total available subtitle.Press the
"SUBTITLE" button until the preferred subtitle is selected. The SUBTITLE selection will cycle
through all available subtitles.
Note: (1) The "S UBTITLE " works only for discs that have multiple subtitle.
(2) In some cases , the subtitle will not changed immediately to the one selected.
* DVD menu (DVD)
Most DVD discs have unique menu structures call DVD menu.The DVD menu’s contents and
operation may differ from disc to disc.
(1) During DVD playback, press the MENU button.The DVD menu available on the disc will be
displayed.
(2) Use / / / to select the preferred item or use the numeric button(s) to make a selection.
(3) Press "ENTER" button, the selected item will start playing.
TITLE 01/06 CHAPTER 001/006 TITLE REMAIN CHAPTER ELAPSED CHAPTER REMAIN
* Title menu (DVD)
Some DVD discs may have more than one title. If the disc has a title menu recorded on it, the
"TITLE" button can be used to access it.
(1) During DVD playback, press the TITLE button. A list of the titles may be displayed.
(2) Use / / / to select the preferred item.
(3) Press "ENTER" button, the selected title will start playing.
* DVD DISP function (DVD/CD)
The display function enables you to view the status, current title number, track number and
the total playing time of the disc on the TV screen.
Audio CD
When the display key is pressed, the following OSD will be shown.
SINGLE ELAPSED 01/15 01 : 40 SINGLE REMAIN 01/15 02 : 39 TOTAL ELAPSED 01/15 01 : 40 TOTAL REMAIN 01/15 42 : 19
TOTAL REMAIN OFF
Current
Track Time
Total Tracks
DVD
When the display key is pressed, the following OSD will be shown.
DVD TYPICAL SETUP MENU AND CONFIGURATION
When the player is in stop mode, pressing "SETUP"
button will allow you to modify some of the player’s
basic settings, you can use "UP / DOWN / RIGHT /
LEFT" buttons to highlight a selection, and press
"ENTER" button to confirm the selection.
Note: S ome DV D menu settings do not apply to this
sys tem, since it is specifically engineered for
automotive use. C hanging the state of s ome
settings can cause apparent s ys tem failure. If
you try to perform an action that is not permitted
(such as acces sing the P references menu while
a disc is playing), the on-screen-menu will us e
the following symbol:
* Changing the Aspect Ratio Mode
This is under the GENERAL tab. The correct setting
is WIDE. Changing this setting to "NORMAL/PS" or
"NORMAL/LB" will result in distorted video.
* Select Picture Mode
To select the pic mode, select "AUTO" / "HI-RES"
and "N-FLICKER" set pic mode.
GENERAL SETUP
AUDIO SETUP
PREFERENCES
VERSION INFO.
EXIT SETUP
GENERAL SETUP
SETUP MENU -- MAIN PAGE
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
NORMAL/PS
NORMAL/LB
WIDE
GENERAL SETUP
-- GENERAL PAGE --
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
AUTO
HI-RES
N-FLICKER
SET TV STANDRD MODE
-- GENERAL PAGE --
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
ON
OFF
ANGLE MARK ON/OFF
-- GENERAL PAGE --
* Cancealing the "ANGLE MARK"
To display or canceling the "ANGLE MARK", which
appears during scenes that support a multiple-
viewing-angle feature, select "GENERAL" and
"ANGLE MARK". Since the remote included does
not support this feature, the default state for this
setting is "OFF"

13 14
* To change on-screen-display language
To change on-screen-display, select "GENERAL
"and "OSD LANG". The original setting including
"ENGLISH" and "CHINESE".
* Activating Captions and Subtitles
To enable or disable captions or subtitles, select
"GENERAL" and "CAPTIONS".
Note: If C AP T IONS is set to O F F , the S UB T ITLE
button will be prevented from working. If
S UB T IT L E O F F is s elected under P references-
Audio, then the S UB T ITLE button can s till
enable subtitles during palyback, as long as
C AP TIONS is s et to ON.
* Screen Saver
Select "SCR SAVER", and select "ON / OFF" to set
screen saver.
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
ENGLISH
CHINESE
CHINESE F
JAP ANESE
SET OSD LANGUAGE
-- GENERAL PAGE --
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
ON
OFF
CLOSED CATION
-- GENERAL PAGE --
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER ON
OFF
SCREEN SAVER
-- GENERAL PAGE --
DVD TYPICAL SETUP MENU AND CONFIGURATIONDVD TYPICAL SETUP MENU AND CONFIGURATION
* Audio Setup
Pressing "SETUP" button and use "UP / DOWN / RIGHT / LEFT" buttons to highlight the
"AUDIO SETUP" setting, you can set the "AUDIO OUTPUT / OP MODE / DUAL MONO /
/ DYNAMIC / PRO LOGIC / LPCM OUTPUT" under the audio setup page.
GENERAL SETUP
AUDIO SETUP
PREFERENCES
VERSION INFO.
EXIT SETUP
GOTO AUDIO SETUP
SETUP MENU -- MAIN PAGE
AUDIO OUT
DYNAMIC
PRO LOGIC
LPCM OUTPUT
OP MODE
DUAL MONO
MAIN PAGE
ANALOG
SPDIF/RAW
SPDIF/PCM
AUDIO RELATED
-- AUDIO SETUP --
AUDIO OUT
OP MODE
DUAL MONO
DYNAMIC
PRO LOGIC
LPCM OUTPUT
MAIN PAGE
OFF
ON
AUTO
SET PRO LOGIC ON/OFF
-- AUDIO SETUP --
AUDIO OUT
OP MODE
DUAL MONO
PRO LOGIC
DYNAMIC
LPCM OUTPUT
MAIN PAGE
- FULL
-
- 6/8
-
- 4/8
-
- 2/8
-
-
-
-
-
-
-
-
-
- OFF-
DYNAMIC RANGE COMPRESSION
-- AUDIO SETUP --
AUDIO SETUP
AUDIO OUT
DYNAMIC
PRO LOGIC
LPCM OUTPUT
OP MODE
DUAL MONO
MAIN PAGE
STEREO
L-MONO
R-MONO
MIX-MONO
DUAL MONO (1+1) SETUP
-- AUDIO SETUP --
AUDIO OUT
DYNAMIC
PRO LOGIC
LPCM OUTPUT
OP MODE
DUAL MONO
MAIN PAGE
LINE OUT
RF REMOD
OPERTIONAL MODE SETUP
-- AUDIO SETUP --
DUAL MONO SETUP
PRO LOGIC SETUPDYNAMIC SETUP
OP MODE SETUP
AUDIO OUT
OP MODE
DUAL MONO
DYNAMIC
PRO LOGIC
LPCM OUTPUT
MAIN PAGE
LPCM 48K
LPCM 96K
SET LPCM OUTPUT TO 48K OR 96
-- AUDIO SETUP --
LPCM OUTPUT SETUP

15 16
* Preference Setup
Several language settings can be customized on the DVD Player. These languages can
vary depending on the language supported by the DVD disc. Select "PREFERENCES"
and highlight the selection, you can choose the language and save the setting.
Note: * Not all language s ettings are supported by all discs.
* The languages supported vary with the individual option setting - there is no gobal
language setting.
* Make s ure to set the "P R E F R E NC E S " in advance before put disc in, the "P R E F R E NC E S "
settings can't be changed after the disc inserted.
TV TYPE SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
MULTI
NTSC
PAL
SET TV STANDARD
-- PREFRENCES PAGE --
AUDIO LANGUAGE SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
PREFERRED AUDIO LANGUAGE
-- PREFRENCES PAGE --
DVD TYPICAL SETUP MENU AND CONFIGURATIONDVD TYPICAL SETUP MENU AND CONFIGURATION
PASSWORD SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
CHANGE PASSWORD
-- PREFRENCES PAGE --
DEFAULTS SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
LOAD FACTORY SETTINGS
-- PREFRENCES PAGE --
CHANGE
RESET
LOCALE LANGUAGE SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
PREFERRED LOCALITY CODE
-- PREFRENCES PAGE --
PARENTAL SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
SET PARENTAL CONTROL
-- PREFRENCES PAGE --
FRANCE
CHINA
HONG KONG
JAPAN
TAIWAN
GBR
USA
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO PARENTAL
SUBTITLE LANGUAGE SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
PREFERRED SUBTITLE LANGUAGE
-- PREFRENCES PAGE --
DISC MENU LANGUAGE SETUP
TV TYPE
AUDIO
SUBTITLE
DISC MENU
LOCALE
PARENTAL
PASSWORD
DEFAULTS
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
PREFERRED MENU LANGUAGE
-- PREFRENCES PAGE --
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF

17 18
PRODUCT SPECIFICATION
_
GENERAL
Power Supply  : 13.2VDC Typical
Current Consumption : Less than 3.0 A
Operating positions : 0, 45 and 90 degree
Dimension (WxDxH) : W178mmX D210mmX H50mm
Weight   : 1.5kg
AUDIO
Output   : 2rms, (1)
Frequency response : 20 Hz to 20 kHz (-3+1db)
THD   : 0.2% (at 1 kHz)
S/N ratio  : 70dB
Cross talk  : 70dB
VIDEO
Television System : NTSC/PAL
Playback Disc  : DVD/CD & CD-R compatible (12cm)
Single sided and dual layer DVD supported
Aspect ratio  : 4:3, 16:9
TV Encoder Resolution : 10 bit DAC
Video S/N  : 65 dB
All specifications are subjected to change without prior notice.
CONNECT
Audio Video Output : 3 RCA connector for Video and Audio
Rear IR Connector : For connection to rear IR sensor input