HiFuture Gravity User manual

Gravity
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –14
Čeština
15 –26
Slovenčina
27 –38
Magyar
39 –50
Deutsch
51 –62

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before
first use and keep this user manual for future reference. Pay particular attention to the safety
instructions. If you have any questions or comments about the device, please contact the
customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Packaging
Power On
Auto OFF: The speaker will automatically power off if there is no connection for 10 minutes.
Auto Disconnect: If there is no music playing for 30 minutes after Bluetooth connection, the
speaker will automatically disconnect.
Press and hold for two seconds
On
Off

5
Diagram
1. Twin speaker mode/Equalizer
2. Volume down/Previous track
3. Pause/Play
4. Volume up/Next track
5. Power button/RGB indicator
6. Type-C charging port
7. Power/Bluetooth indicator light
8. RGB light
(To power on or off the RGB light while the
speaker is powered on, simply perform a single
click on the power button. This will toggle the
RGB light accordingly.)

6
Connecting
Press and hold for two seconds
<1 meter
Flashing blue before connection.
After successful connection blue light always
illuminates

7
Music Control
Dual Equalizer
Press and hold
Press once
Press and hold
Indicator of two equalizers
Equalizer one: Blue always
illuminates.
Equalizer two: Blue breaths
(Equalizer one is default)
Double click to switch from equalizer
one to equalizer two
Equalizer one is general
equalizer
Equalizer two is bass equalizer
(Equalizer 1 is default)

8
Charging
Switch Between Two Bluetooth Devices
Red indicator will stop illuminate
when fully charged.
Red indicator will illuminate
during charging.
First step
Second step
Press and hold for two seconds
Phone A
Phone B
<1 meter
Flashing

9
Twin Speakers Mode Conncetion
The indicator on the device will flash blue during the pairing process. Once the Bluetooth
connection is established, the indicator will remain steadily illuminated in blue.
Speaker 1
Speaker 1
Speaker 2
Speaker 2
Hold for 2 seconds
Hold for 2 seconds
Flashing
Flashing
Steady light
Steady light
Press once
Press once

10
Restore Factory Settings
To reset the Gravity, ensure that the Gravity speaker is powered on. Then, perform a long
press on the designated button for approximately 7 seconds. You will hear a prompt sound,
indicating that the Gravity speaker has been successfully reset.
If you are experiencing issues with the Gravity speaker not being properly connected
to your devices, you may need to consider resetting it. This can help establish a fresh
connection and resolve any connectivity problems you may be encountering.
After resetting the Gravity speaker, it is recommended to remove the previously
paired "HiFuture Gravity" from your device. This can be done by accessing your
device's Bluetooth settings and selecting the option to forget or delete the pairing.
Once deleted, you can proceed to re-pair the Gravity speaker with your device by
following the standard pairing procedure.
Hold on for seven
seconds
Forget this device