High End Systems FQ-100 User manual

User Manual
©High End Systems Inc.,2017, All Rights Reserved
Information and specifications in this document are subject to change without notice.
High End Systems, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual.
Trademarks used in this text:
High End Systems is a registered trademark; and the High End Systems globe logo, is
a trademark of High End Systems, Inc..
Other trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. High End Systems
disclaims any proprietary interest in trademarks and trade names owned by others.
FQ-100 Performance Fog Generator User Manual
p/n Version 2.0
January, 2010

ii
Contact Information
U.S. and the Americas
Sales Department High End Systems
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 512.836.2242
fax: [phone]
Toll Free: 800.890.8989
Customer Service High End Systems
2105 Gracy Farms Lane
Austin, TX 78758 USA
voice: 800.890.8989
fax: [phone]
toll free: 800.890.8989
World Wide Web: http://www.highend.com

iii
Product Modification Warning
High End Systems products are designed and manufactured to meet the requirements
of United States and International safety regulations. Modifications to the product
could affect safety and render the product non-compliant to relevant safety
standards.
Mise En Garde Contre La Modification Du Produit
Les produits High End Systems sont conçus et fabriqués conformément aux exigences
des règlements internationaux de sécurité. Toute modification du produit peut
entraîner sa non conformité aux normes de sécurité en vigueur.
Produktmodifikationswarnung
Design und Herstellung von High End Systems entsprechen den Anforderungen der
U.S. Amerikanischen und internationalen Sicherheitsvorschriften. Abänderungen
dieses Produktes können dessen Sicherheit beeinträchtigen und unter Umständen
gegen die diesbezüglichen Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto
I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i
requisiti delle normative di sicurezza statunitensi ed internazionali. Qualsiasi modifica
al prodotto potrebbe pregiudicare la sicurezza e rendere il prodotto non conforme agli
standard di sicurezza pertinenti.
Advertencia De Modificación Del Producto
Los productos de High End Systems están diseñados y fabricados para cumplir los
requisitos de las reglamentaciones de seguridad de los Estados Unidos e
internacionales. Las modificaciones al producto podrían afectar la seguridad y dejar al
producto fuera de conformidad con las normas de seguridad relevantes.
Important Safety Information
Warnings pertaining to continued protection against fire, electric shock, and injury to
persons are at the end of this document. Please read all instructions prior to
assembling, mounting, and operating this equipment.
Important: Informations De Sécurité
À la fin de ce document, vous mai trouver des instructions relatives à la protection
continue contre les incendies, d'électrocution et de blessures aux personnes. Veuillez
lire toutes les instructions avant d’assembler, de monter ou d’utiliser cet équipement.
Wichtige Sicherheitshinweise
Warnungen im Zusammenhang mit anhaltenden Schutz gegen Feuer, Stromschlägen
und Verletzungen von Personen sind am Ende dieses Dokuments. Vor der Montage,
dem Zusammenbau und der Intbetriebnahme dieses Geräts alle Anleitungen
sorgfältig durchlesen.

iii
Product Modification Warning
High End Systems products are designed and manufactured to meet the requirements
of United States and International safety regulations. Modifications to the product
could affect safety and render the product non-compliant to relevant safety
standards.
Mise En Garde Contre La Modification Du Produit
Les produits High End Systems sont conçus et fabriqués conformément aux exigences
des règlements internationaux de sécurité. Toute modification du produit peut
entraîner sa non conformité aux normes de sécurité en vigueur.
Produktmodifikationswarnung
Design und Herstellung von High End Systems entsprechen den Anforderungen der
U.S. Amerikanischen und internationalen Sicherheitsvorschriften. Abänderungen
dieses Produktes können dessen Sicherheit beeinträchtigen und unter Umständen
gegen die diesbezüglichen Sicherheitsnormen verstoßen.
Avvertenza Sulla Modifica Del Prodotto
I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i
requisiti delle normative di sicurezza statunitensi ed internazionali. Qualsiasi modifica
al prodotto potrebbe pregiudicare la sicurezza e rendere il prodotto non conforme agli
standard di sicurezza pertinenti.
Advertencia De Modificación Del Producto
Los productos de High End Systems están diseñados y fabricados para cumplir los
requisitos de las reglamentaciones de seguridad de los Estados Unidos e
internacionales. Las modificaciones al producto podrían afectar la seguridad y dejar al
producto fuera de conformidad con las normas de seguridad relevantes.
Important Safety Information
Warnings pertaining to continued protection against fire, electric shock, and injury to
persons are at the end of this document. Please read all instructions prior to
assembling, mounting, and operating this equipment.
Important: Informations De Sécurité
À la fin de ce document, vous mai trouver des instructions relatives à la protection
continue contre les incendies, d'électrocution et de blessures aux personnes. Veuillez
lire toutes les instructions avant d’assembler, de monter ou d’utiliser cet équipement.
Wichtige Sicherheitshinweise
Warnungen im Zusammenhang mit anhaltenden Schutz gegen Feuer, Stromschlägen
und Verletzungen von Personen sind am Ende dieses Dokuments. Vor der Montage,
dem Zusammenbau und der Intbetriebnahme dieses Geräts alle Anleitungen
sorgfältig durchlesen.

iv
Informazioni Importanti Di Sicurezza
Alla fine di questo documento, si possono trovare le istruzioni per una protezione
continua contro gli incendi, scosse elettriche e lesioni alle persone. Si prega di leggere
tutte le istruzioni prima di assemblare, montare e azionare l’apparecchiatura.
Informacion Importante De Seguridad
Al final de este documento, usted puede encontrar instrucciones para la protección
continua contra el fuego, descarga eléctrica y lesiones a personas. Lea, por favor,
todas las instrucciones antes del ensamblaje, montaje y operación de este equipo.
Warranty Information
Limited Warranty
Unless otherwise stated, your product is covered by a one year parts and labor limited
warranty. Dichroic filters and LithoPatterns®high resolution glass gobos are not
guaranteed against breakage or scratches to coating. It is the owner’s responsibility
to furnish receipts or invoices for verification of purchase, date, and dealer or
distributor. If purchase date cannot be provided, date of manufacture will be used to
determine warranty period.
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Material Authorization (RMA) number from your
dealer or point of purchase BEFORE any units are returned for repair. The
manufacturer will make the final determination as to whether or not the unit is
covered by warranty. Lamps are covered by the lamp manufacturer’s warranty.
FQ-100 fog generators must be returned in its original roadcase. Any other parts
returned to High End Systems must be packaged in a suitable manner to ensure the
protection of such Product unit or parts, and such package shall be clearly and
prominently marked to indicate that the package contains returned Product units or
parts and with an RMA number. Accompany all returned Product units or parts with a
written explanation of the alleged problem or malfunction. Ship returned Product units
or parts to: 2105 Gracy Farms Lane, Austin, TX 78758 USA.
Note: Freight Damage Claims are invalid for fixtures shipped in
non-factory boxes and packing materials.
Freight
All shipping will be paid by the purchaser. Items under warranty shall have return
shipping paid by the manufacturer only in the Continental United States. Under no
circumstances will freight collect shipments be accepted. Prepaid shipping does not
include rush expediting such as air freight. Air freight can be sent customer collect in
the Continental United States.
REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. HIGH END SYSTEMS, INC. MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PRODUCT, AND HIGH
END SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS

v
FOR A PARTICULAR PURPOSE. HIGH END SHALL NOT BE LIABLE FOR ANY INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGE, INCLUDING LOST PROFITS, SUSTAINED
OR INCURRED IN CONNECTION WITH ANY PRODUCT OR CAUSED BY PRODUCT
DEFECTS OR THE PARTIAL OR TOTAL FAILURE OF ANY PRODUCT REGARDLESS OF
THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE),
STRICT LIABILITY OR OTHERWISE, AND WHETHER OR NOT SUCH DAMAGE WAS
FORESEEN OR UNFORESEEN.
Warranty is void if the product is misused, damaged, modified in any way, or for
unauthorized repairs or parts. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.

vi

vii
FQ-100 Fog Generator User Manual
Table of Contents
User Manual ................................................................................ i
Contact Information ...................................................................ii
Product Modification Warning .....................................................iii
Important Safety Information .....................................................iii
Warranty Information ................................................................iv
Limited Warranty ................................................................iv
Returning an Item Under Warranty for Repair ........................iv
Freight ..............................................................................iv
Product Overview
Features .................................................................................... 1
Output .................................................................................... 1
Construction ............................................................................ 1
Options ................................................................................... 1
Fluid Types .............................................................................. 1
Specifications ............................................................................. 2
Mechanical ............................................................................... 2
Output .................................................................................... 2
Operation ................................................................................ 3
DMX Control ............................................................................ 3
Related Products and Accessories .................................................. 3
Installation and Setup
Unpacking .................................................................................. 4
Installing the FQ-100 ................................................................... 5
Setup ........................................................................................ 6
Mounting ................................................................................. 6
Filling the Tank ........................................................................ 6
Starting up the Unit .................................................................. 6
Operation
Menu System ............................................................................. 7
Function Options ......................................................................... 7
Interval Set ............................................................................. 7
Duration .................................................................................. 7
Timer Output ........................................................................... 7
Volume Output ......................................................................... 8
DMX Addressing .......................................................................... 8
Manual Operation ........................................................................ 8

viii
FQ-100 Fog Generator User Manual
DMX Control ................................................................................8
Fluid Sensor Function ...................................................................9
Maintenance and Storage........................................................10
Important Safety Information................................................11
IMPORTANTES INFORMATIONS SUR LA SÉCURITÉ .......................12
WICHTIGE HINWEISE FÜR IHRE SICHERHEIT ..............................13
INFORMACIÓN IMPORTANTE DE SEGURIDAD ..............................14
IMPORTANTI INFORMAZIONI PER LA SICUREZZA .........................15

FQ-100 Fog Generator User Manual
1
Product Overview
The FQ-100™ performance fog generator; designed for use in the nightclub,
theatrical and touring industries; can produce a range of atmospheres from
dense fog to fine mist. Atmospheres® Fog Generating fluid is specially
formulated to provide a dense, safe, water-based fog of a fine particulate size.
In addition to low noise levels, the FQ-100 also includes an internal LCD digital
menu system providing the ability to set the volume control, timer control, and
DMX functions at the fixture.
Features
• Large 9.5 liter (2.5 gallon) removable fluid reservoir for extended use
• Atmospheres® scientifically formulated fluid provides optimum particulate
size for lighting applications
•LCDMenu
• Timer with interval, duration, and volume; set DMX; continuous fogging,
Manual ON/OFF
• 3-pin and 5-pin XLR DMX in/out connectors
• Fluid level sight gauge
• User replaceable fluid filter
Output
• 20,000 cu.ft (566m3) / min. output
• 10 min. / 1 liter fluid consumption rate
•11 minutes warm-up time
• Optoelectronic liquid sensor with auto shutoff
Construction
• Low-maintenance, corrosion-resistant vaporizing chamber
• Dual carrying handles
• Safety cable mounting point
Options
• 100-120 VAC 50/60 Hz
• 200-240 VAC 50/60 Hz
Fluid Types
•HQ
•Stage

FQ-100 Fog Generator User Manual
2
Specifications
Mechanical
Fixture Dimensions: 646mm x 301mm x 168mm (25.4in x 11.9in x 6.6in)
Boxed for Shipping: 740mm x 410mm x 602mm (29.0in x 16.1in x 23.7in)
Fixture Weight: 15.5 kg (34 lb)
Shipping Weight: 19 kg (42 lb)
Output
Fluid capacity: 9.5 liter (2.5 gal) fluid reservoir
Minimum Output: 566 m3(20,000 ft3)
Warm-up Time: 11 min
Liquid Sensor: Optoelectronic with auto shutoff
Fluid Type: Water-based Atmospheres ® fine particulate fog generating fluid.
HQ, Stage
301 mm
11.9 in
646 mm
25.4 in
627 mm
24.7 in
168 mm
6.6 in
65 mm
2.6 in
16 mm
0.6 in

FQ-100 Fog Generator User Manual
3
Operation
Menu Interface:
• Timer to set interval and duration
•V
olumecontrol
• DMX Channel setting
•Manual ON/OFF
• Continuous fogging setting
•LCDDisplay
Compliance: ROHS, TUV 499 (UL standard)
Environmental Specifications:
• Minimum ambient temperature -5° C (23°F)
• Minimum ambient temperature 50°C (122°F)
DMX Control
Control: DMX-512
Channel Requirement: One
Address Methods: Menu Display, DMX Data Connection
Related Products and Accessories
Name Part Number
Atmospheres Liquid, 2.11 Gal HQ 05040001
Atmospheres, 5 Gal HQ 05040002
Atmospheres, 2.11 Gal Stage 05040004
Atmospheres, 5 Gal Stage 05040005
Atmospheres, 55 Gal Stage 05040018
Atmospheres, 55 Gal HQ 05040019
Heavy duty 5-pin XLR cable (10’) 55050017
Heavy duty 5-pin XLR cable (25’) 55050018
Heavy duty 5-pin XLR cable (50’) 55050019
Heavy duty 5-pin XLR cable (100’) 55050020
Galvanized safety cable 12040001

FQ-100 Fog Generator User Manual
4
Installation and Setup
Unpacking
The shipping carton contains the FQ-100, its fog fluid bottle, and this manual.
If parts are missing or the fixture is damaged, notify both the shipping agent
and your sales agent immediately.
Do not discard the shipping carton and packing materials. The carton and
packing materials are specifically designed to protect the product during
transport.
High End Systems® assumes no responsibility for products that are damaged
during transport. Always return a product for repair in its original shipping
carton and packing materials.
Note: Before sending anything to the factory, call your High End
Systems dealer/distributor for a Return Material
Authorization (RMA) number. The factory cannot accept
any goods shipped without an RMA number.
12
4
3
3
6
7
8
910
11
12
5
1. Nozzle
2. Housing
3. Handle
4. Tank cap and tube
5. Fluid Tank
6. Safety cable mount
7. DMX 3-pin IN and OUT socket
8. DMX 5-pin IN and OUT socket
9. Power ON/OFF
10. Circuit breaker (reset)
11. Power cable
12. LCD Menu System

FQ-100 Fog Generator User Manual
5
Installing the FQ-100
This product is constructed with a low-maintenance, corrosion-resistant
vaporizing chamber and dual carrying handles. A safety cable mounting point
can be used in securing the unit when strapped to a truss.
Before installing and operating this product, read and observe the following
warnings and cautions. Pay attention to all warning labels and instructions
printed on the exterior of your FQ-100 Fog Machine.
Caution!
Do not use the handles as a safety cable mounting point.
WARNING! Risk of electric shock.
Disconnect the unit from the electric supply before
removing the cover. Keep this device dry.
For inside use only. Not designed for outside use. For the
110V models, use 3-prong grounded electrical outlet only.
Prior to use take care to determine that the unit is installed
at the rated voltage.
WARNING! Danger of burns
Never leave the unit running unattended.
Never aim the output nozzle directly at people.
Fog machine output is very hot. Avoid coming within 60 cm
of the output nozzle during operation.
Locate the fog machine in a well-ventilated area. Never
cover the unit's vents. In order to guarantee adequate
ventilation, allow a free air space of at least 20 cm around
the sides and top of the unit.
Never aim the output nozzle at open flames.
The output nozzle becomes very hot during operation
(300°C). Keep flammable materials at least 50 cm away
from the nozzle.
Always allow the FQ-100 Fog Generator to cool down
before attempting to clean or service it.
WARNING! Danger of explosion
Never add flammable liquids of any kind (oil, gas, perfume)
to the fog liquid.

FQ-100 Fog Generator User Manual
6
Setup
Mounting
This model can be operated at a floor level or sitting on any regular surface.
Filling the Tank
This product is warranted for use only with Atmospheres® fog fluid.
To fill the tank:
1. Place fog machine on a flat surface and remove fog liquid tank cap.
2. Fill with Atmospheres fog liquid about 3/4 full and replace cap.
Starting up the Unit
Plug the power cord into a grounded electrical outlet. Turn the power switch to
“ON”. Warm-up is complete when the display shows “Ready to Fog”
CAUTION!
Do not allow the unit to have more than a 35° angle of
inclination.
CAUTION!
When using Atmospheres fog fluid, always make sure there
is sufficient liquid in the fog liquid tank. Operating this unit
without liquid will cause damage to the pump as well as
over-heating of the heater.
If your FQ-100 Fog Machine fails to work properly,
discontinue use immediately. Drain all fog liquid from the
tank, pack the unit securely (preferably in the original
packing material), and return it to your FQ-100 dealer for
service.
Keep fog machine upright.
Turn off or unplug when not in use.
This machine is not water or splash-proof. If moisture,
water, or fog liquid gets inside the housing, immediately
unplug the unit and contact a service technician or your
FQ-100 dealer before using it again.
There are no user serviceable parts inside. Always refer
your FQ-100 dealer or other qualified personnel for
servicing.

FQ-100 Fog Generator User Manual
7
Operation
Menu System
The FQ-100 unit has an LCD display and a six-button control panel. After the
FQ-100 performance fog generator has warmed up and is displaying “Ready to
Fog”, you can access and set the sub-menu options.
Function Options
Interval Set
1. When LCD displays “Ready To Fog”, press the FUNCTION button once. The
display shows INTERVAL SET .
2. Use the UP/DOWN buttons to adjust the fog output interval of Timer mode
from 1 to 200 seconds.
Duration
1. When LCD displays “Ready To Fog”, press FUNCTION button twice. The
display shows DURATION SET.
2. Use the UP/DOWN buttons to adjust the fog output duration of Timer
mode from 1 to 200 seconds.
Timer Output
1. When LCD menu screen displays “Ready To Fog”, press FUNCTION three
times. The display shows TIMER OUT.
2. Use the UP/Down buttons to adjust the fog output volume of Timer mode
from 1% to 100%.
FUNCTION
VOLUME
ON / OFF
TIMER MANUAL

FQ-100 Fog Generator User Manual
8
3. You can trigger the Timer mode by pressing the TIMER button when LCD
menu screen shows “Ready To Fog”. Pressing TIMER button again ends the
Timer mode.
Note: There is a Non-Stop Burst function between Timer Out
1% and Timer Out 100%. Choosing this function can
make machine generate continuous fog output under
Timer mode.
Volume Output
1. When the LCD menu screen displays “Ready To Fog”, press FUNCTION
four time. The screen shows VOLUME OUT
.
2. Use the UP/DOWN buttons to adjust the fog output volume of the Volume
mode from 1% to 100%. Trigger the Volume mode by pressing the
VOLUME button when LCD menu screen shows “Ready To Fog”. Pressing
the VOLUME button again ends the Volume mode.
Note: There is a Non-Stop Burst function between Volume Out
1% and Volume Out 100%. Choosing this function can
make machine generate continuous fog output under
Volume mode.
DMX Addressing
1. When LCD menu screen displays “Ready To Fog”, press FUNCTION five
times. The screen shows DMX 512 ADD.
2. Use the UP/DOWN buttons to adjust the DMX address.
Manual Operation
Pressing the MANUAL button when LCD menu screen displays “Ready To Fog”
produces 100% full fog output. Release the MANUAL button to stop fogging.
DMX Control
The FQ-100 fog generator uses 1 channel on a standard DMX512 link to control
volume output. This channel has a value range of 0 to 255. Timer functions such
as duration and interval can be programmed using a DMX controller.
When the channel DMX value equals 0 to 5, the unit is OFF. The volume output
rises as the DMX value is increased from a minimum output at a DMX value = 6
approaching the maximum at a DMX value = 255 (100%).

FQ-100 Fog Generator User Manual
9
Fluid Sensor Function
The Fluid Sensor detects low fluid levels on FQ-100 fog machine.
When the fluid tank is empty (run out of fog fluid), the LCD menu screen starts
to flash “Empty Fluid” to warn users and the fluid pump stops working
automatically to protect the pump from burn out.
After you refill the fluid tank, press the MANUAL button until the LCD screen
displays to “Ready to Fog” again.
When the fluid sensor is on, the LCD screen shows “Ready to Fog S” (The “S”
means “Sensor On”). When it is off, the LCD screen shows “Ready to Fog”
(without the “S”).
If you do not need the fluid sensor function, you can use the control panel to
switch it off. To switch off the fluid sensor:
1. Press the FUNCTION button on the control panel until LCD screen shows
"Fluid Sensor On".
2. Press the UP/DOWN button to turn off the fluid sensor. The screen
displays "Fluid Sensor Off"
3. Pressing the UP/DOWN button again will turn the fluid sensor back on.
CAUTION!
When using Atmospheres fog fluid, always make sure there is
sufficient liquid in the fog liquid tank. Operating this unit
without liquid will cause damage to the pump as well as over-
heating of the heater.

FQ-100 Fog Generator User Manual
10
Maintenance and Storage
To maintain the FQ-100 fog generator:
• Do not allow the fog liquid to become contaminated
• Always replace the caps on the fog liquid container and the liquid tank
immediately after filling
• Never operate the fog machine without liquid
• Keep vented cover free of debris
• Keep fluid container free of debris and rinse periodically with Atmospheres
fluid
• For service, refer to qualified personnel only. Unauthorized service will void
the warranty
Cleaning your fog machine regularly will help reduce costly replacement and
repair charges.
• Clean with a dry cloth only
• Store dry

FQ-100 Fog Generator User Manual
11
Important Safety Information
WARNING: For Continued Protection Against Fire
1. Do not operate near flammable materials or gases.
2. Do not mount on a flammable surface.
3. Replace fuses only with the specified type and rating.
WARNING: For Continued Protection Against Electric Shock
1. Equipment suitable for dry locations only. Do not expose to rain or
moisture.
2. Do not overfill or clean this product with power connected.
3. Refer servicing to qualified personnel.
4. Not for residential use.
WARNING: For Continued Protection Against Injury To Persons
1. Do not install this unit directly overhead an audience or artists.
2. No user servicable part inside.
3. Atmospheres® fluid has been specifically designed for use in this machine.
It has been tested for use by independent toxicological laboratories and
found non-toxic to test articles. Use of other fluids which may not take into
account specific evaporation systems, temperature, flow rate and materials
of construction may be construed as a health hazard. Do not dilute
Atmospheres® fluid. Dilution with water, scent or other constituents can
cause rapid evaporation system failure. Combining additives to
Atmospheres® fluid may be a health and fire hazard.