HIK VISION DS-IX2001-A3U/X User manual

Intelligent Fusion Server
Installaon Guide

Legal Informaon
Installaon Guide
©2019 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hp://
overseas.hikvision.com/en/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
: The terms HDMI and HDMI High-Denion Mulmedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
Intelligent Fusion Server Installaon Guide
i

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Intelligent Fusion Server Installaon Guide
ii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucon manual, may cause harmful
interference to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference in which case the user will be required to correct the interference at his
own expense.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Direcve 2014/30/EU, the RoHS Direcve
2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collecon points.
For more informaon see: hp://www.recyclethis.info .
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the
product documentaon for specic baery informaon. The baery is
marked with this symbol, which may include leering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to
your supplier or to a designated collecon point. For more informaon see:
hp://www.recyclethis.info .
Intelligent Fusion Server Installaon Guide
iii

Preface
Applicable Models
This manual is applicable to DS-IX2001-A3U/X and DS-IX2003-A3U/X.
Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous situaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional informaon to emphasize or supplement
important points of the main text.
Intelligent Fusion Server Installaon Guide
iv

Contents
Chapter 1 Acvaon and Login ................................................................................................... 1
1.1 Network Connecon .............................................................................................................. 1
1.2 Tools Preparaon ................................................................................................................... 1
1.3 PC Requirements .................................................................................................................... 1
1.4 Acvaon ............................................................................................................................... 1
1.4.1 Acvate via SADP Soware ........................................................................................... 1
1.4.2 Acvate via Web Browser ............................................................................................. 2
1.5 Login ...................................................................................................................................... 3
Chapter 2 Conguraon Wizard .................................................................................................. 5
2.1 Modify Device IP .................................................................................................................... 5
2.2 Deploy Micro Video Cloud ..................................................................................................... 5
2.2.1 Format Storage Volume ................................................................................................ 5
2.2.2 Create Micro Video Cloud Cluster ................................................................................. 7
2.2.3 Set Storage Parameter .................................................................................................. 8
2.2.4 Add Storage Node to Domain ....................................................................................... 9
2.2.5 Create Stac Pool ........................................................................................................ 10
2.2.6 Create Video Pool ....................................................................................................... 11
2.2.7 Create Dynamic Pool ................................................................................................... 12
2.2.8 Add Micro Video Cloud ............................................................................................... 13
2.3 Create Cluster ...................................................................................................................... 15
2.3.1 Add Nodes ................................................................................................................... 15
2.3.2 Create Stand-alone Cluster ......................................................................................... 16
2.3.3 Create Master and Backup Cluster .............................................................................. 19
Appendix A. Install Operang System ....................................................................................... 21
A.1 Network Interface ................................................................................................................ 21
A.2 BMC Conguraon .............................................................................................................. 21
Intelligent Fusion Server Installaon Guide
v

A.2.1 Default Informaon .................................................................................................... 21
A.2.2 View BMC IP Address .................................................................................................. 21
A.2.3 Modify BMC IP Address .............................................................................................. 22
A.3 Enable Remote Controller ................................................................................................... 22
A.4 Open Mirror File .................................................................................................................. 23
A.5 Install OS .............................................................................................................................. 23
A.6 Modify Node IP .................................................................................................................... 25
Appendix B. Install and Uninstall LIGHTSYSTEM Soware ......................................................... 28
B.1 Install LIGHTSYSTEM Soware ............................................................................................. 28
B.2 Uninstall LIGHTSYSTEM Soware ........................................................................................ 28
Appendix C. Install and Uninstall Micro Video Cloud ................................................................. 30
C.1 Install Micro Video Cloud ..................................................................................................... 30
C.2 Uninstall Micro Video Cloud ................................................................................................ 30
Intelligent Fusion Server Installaon Guide
vi

Chapter 1 Acvaon and Login
1.1 Network Connecon
Please refer to Network Interface for network connecon requirements.
1.2 Tools Preparaon
• SADP Soware.
• Xshell.
• Java Environment (JER 1.8 or above version).
1.3 PC Requirements
You can get access to the server with Web browser.
The requirements for your PC are shown as below.
•Operang system: Microso Windows 7, Microso Windows 8.
• CPU: Intel Penum IV 3.0 GHz or above.
• Memory: 1G or larger.
•Resoluon: 1024 × 768 or higher.
• Web browser: Internet Explorer 8 to 11.
1.4 Acvaon
The server is available only aer being acvated.
1.4.1 Acvate via SADP Soware
Before You Start
• Obtain and install SADP soware.
• Your PC should be in the same subnet with the device.
Steps
1. Run the SADP soware.
Note
The IP address is set as 192.168.1.64 by default.
The server will search all online devices in the same subnet. Detailed informaon such as device
type, IP address, acvaon status and device serial number.
Intelligent Fusion Server Installaon Guide
1

2. Select the desired device, set your password in Acvate Device and click Acvate.
Figure 1-1 Acvate via SADP Soware
Note
• We highly recommend you create a strong password of your own choosing (using a minimum
of 8 characters, including upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product.
• We recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
The Acvaon Status will change to be Acvated aer the device is acvated.
3. Modify network parameters of the device.
1) Select an acvated device, and enter informaon such as IP Address, Subnet Mask and
Gateway in the Modify Network Parameter.
2) Enter your password and click modify.
The prompt informaon of "Network parameters modied." indicates that those sengs will
take eects.
1.4.2 Acvate via Web Browser
The device can be acvated via Web browser. The default IP address is 192.168.1.64.
Before You Start
• Make sure your PC connects to the Internet.
• Modify the IP address of your PC to make sure the PC and the server are in the same subnet.
Steps
1. Double click the IE browser and enter the default IP address (192.168.1.64) of the server.
2. Press Enter to enter the acvaon interface.
Intelligent Fusion Server Installaon Guide
2

Figure 1-2 Acvaon Interface
Note
The password of root user will be changed when the acvaon password is set. As a result, the
password of root user will be the same as that of admin user.
3. Enter password and conrm.
4. Click OK.
1.5 Login
You can get access to the server with web browser.
Note
You shall acknowledge that the use of the product with Internet access might be under network
security risks. For avoidance of any network aacks and informaon leakage, please strengthen
your own protecon. If the product does not work properly, please contact with your dealer or the
nearest service center.
Steps
1. Open web browser, enter the IP address of the server and then press Enter.
Intelligent Fusion Server Installaon Guide
3

Figure 1-3 Login Interface
2. Enter User Name (admin) and Password.
3. Click Login.
Figure 1-4 Home Page
Note
• If the server is inaccessible, go to Internet Opons → Advancement , check Enable TLS1.1
and Enable TLS1.2.
• The specic interface depends on the product.
Aer admin user logs in, the server will jump to the homepage where you can view informaon
such as Alarm Stascs, Camera Stascs, and Capture Stascs.
Intelligent Fusion Server Installaon Guide
4

Chapter 2 Conguraon Wizard
2.1 Modify Device IP
Skip this part if you have modied IP address via SADP soware.
Refer to Modify Node IP to modify device IP by logging in operang system.
Note
Please restart the device aer modifying the IP address of your device.
2.2 Deploy Micro Video Cloud
Micro video cloud is used to store human face pictures and uploaded videos.
2.2.1 Format Storage Volume
Steps
1. Enter hps://192.168.0.1:5119 in IE browser, press Enter and click Connue to view....
Note
Here we take the IP address of the device (192.168.0.1) as an example. You should enter your IP
address according to actual condions.
2. When logging in for the rst me, set the same password in Login Password and Conrm
Password, and click Create.
Figure 2-1 Create Account
3. Enter admin as User Name and the password set as Password, and click Login.
Intelligent Fusion Server Installaon Guide
5

Figure 2-2 Login Interface
Note
Hereaer this interface will be referred as 5119 Interface.
4. Go to Device → Storage Volume , select storage volume, and click Format Storage Volume.
Figure 2-3 Select Storage Volume
5. Keep parameters as default values, and click OK.
Figure 2-4 Format Storage Volume
Figure 2-5 Formang Completed
Intelligent Fusion Server Installaon Guide
6

Note
• It takes a while to complete formang, please wait.
• If there are mulple storage volumes need to be formaed, please repeat the same steps as
shown above.
2.2.2 Create Micro Video Cloud Cluster
Note
The nodes that create micro video cloud cluster should be the same with that of creang analysis
cluster. Otherwise, excepon may occur.
Steps
1. Input hps://192.168.0.1:5120 in IE browser and press Enter to enter HikCStor Management
System.
Note
Here we take the IP address of the device (192.168.0.1) as an example. You should enter your IP
address according to actual condions.
2. When logging in for the rst me, set the same password in Login Password and Conrm
Password, and click Create.
Figure 2-6 Create Account
3. Input User Name and Password, and click Login.
Figure 2-7 Login Interface
Intelligent Fusion Server Installaon Guide
7

Note
Hereinaer this interface will be referred as 5120 Interface.
4. Click Cluster Deployment.
Figure 2-8 Click Cluster Deployment
Note
1 or 2 nodes can create a standalone micro video cloud and 3 to 8 nodes can create a cluster
micro video cloud.
2.2.3 Set Storage Parameter
Steps
Note
The specic parameter values lled in the relevant interfaces below are for reference only. You
need to input relevant parameter values according to actual condion.
1. Go to 5119 Interface.
2. Go to System → Storage Conguraon .
3. Enter the virtual IP of cluster micro video cloud in CVM IP (for standalone micro video cloud,
input node IP).
4. Enter the value that you have set when creang micro video cloud. Here we take light-cloud as
an example.
5. Select Memory Accelerate as Accelerate Type if the node memory is 128 GB, and select SSD
Accelerate as Accelerate Type if the node memory is 256 GB.
Intelligent Fusion Server Installaon Guide
8

Figure 2-9 Set Storage Parameters
Note
You can check node memory by inpung free -g in node operang system
6. Aer seng parameters, click Set CVS Parameters to complete.
2.2.4 Add Storage Node to Domain
Steps
1. Go to 5120 interface.
2. Go to Virtualizing → Domain Management , and click Create.
Figure 2-11 Create Domain
3. Enter Domain Name, and click OK.
4. Check created domain, and click Add CVS.
Figure 2-12 Check Created Domain
5. Check storage node and click OK.
Intelligent Fusion Server Installaon Guide
9

Figure 2-13 Add CVS
2.2.5 Create Stac Pool
Stac pool is used to storage human face picture of list library.
Before You Start
Storage Volume has been formaed.
Note
The specic parameter values lled in the relevant interfaces below are for reference only. You
need to enter relevant parameter values according to actual condion.
Steps
1. Go to Virtualizing → Resource Pool Management .
2. Click Create, and set parameters in the popup dialog box, as shown below.
Parameter Name Descripon
Domain ID Select the domain that you created.
User Name Select admin.
User Permission Select Read/ Write.
Resource Pool Name Enter stac-pool.
Resource Pool Type Select Picture.
Accelerate Picture Select Accelerate.
Storage Mode Select Dispersed.
Overwrite Mode Select Not.
Resource Pool Capacity Enter 300.
Note
It is recommended to set the value as 300, but you can also set
it according to actual needs.
Intelligent Fusion Server Installaon Guide
10

Max. Locking up Aempts Enter 10.
Figure 2-14 Create Stac Pool
Note
The stac resource pool ID is required when adding smart storage unit.
2.2.6 Create Video Pool
Video pool is used to storage video les that are manually uploaded.
Steps
1. Go to Virtualizing → Resource Pool Management .
2. Click Create, and set parameters in the popup dialog box, as shown below.
Parameter Name Descripon
Domain ID Select the domain that you created.
User Name Select admin.
User Permission Select Read/ Write.
Resource Pool Name Enter video-pool.
Resource Pool Type Select Video.
Storage Mode Select Centralized.
Overwrite Mode Select Capacity.
Intelligent Fusion Server Installaon Guide
11

Resource Pool Capacity Enter 100.
Note
It is recommended to set the value as 100, but you can also set
it according to actual needs.
Max. Locking up Aempts Enter 10.
Figure 2-15 Create Video Pool
Note
The stac resource pool ID is required when adding smart storage unit.
2.2.7 Create Dynamic Pool
Dynamic pool is used to storage the human face pictures that are captured by the camera.
Steps
1. Go to Virtualizing → Resource Pool Management .
2. Click Create, and set parameters in the popup dialog box, as shown below.
Parameter Name Descripon
Domain ID Select the domain that you created.
User Name Select admin.
User Permission Select Read/ Write.
Intelligent Fusion Server Installaon Guide
12

Resource Pool Name Enter dynamic-pool.
Resource Pool Type Select Picture.
Accelerate Picture Select Accelerate.
Storage Mode Select Dispersed.
Overwrite Mode Select Capacity.
Resource Pool Capacity Enter remaining capacity.
Note
It is recommended to set the value as the remaining capacity ,
but you can also set it according to actual needs. Click to
view available capacity.
Max. Locking up Aempts Enter 10.
Figure 2-16 Create Dynamic Pool
Note
The stac resource pool ID is required when adding smart storage unit.
2.2.8 Add Micro Video Cloud
Steps
1. Log in Intelligent Fusion Server.
Intelligent Fusion Server Installaon Guide
13