Hindware DYNA URINAL User manual

INSTALLATION INSTRUCTIONS FOR
DYNA URINAL
CAT No. 60010

STEPS FOR INSTALLATION
2
1) After making all arrangements hang the
urinal on bracket & insert the outlet of bellow
inside outlet hole with rubber adaptor.
Place the ceramic plate on water seal
area inside bowl.
Fix the PVC bellow in the outlet with
rubber adapter and make a hole in the wall
for outlet at the same level.
700 mm
275 mm
1
Fix the brackets at a distance of 275 mm at
desired location. The recommended height
from front rim to finished floor is 700mm.
230 mm
4
3
Connect the connecting pipe inside inlet
hole at back & connect the same with
incoming water line.
5