Hisense 49SOA25PT User manual

Beyond An Immersive Experience 2022
User Manual Outdoor Series
49OA25PT
Issue Date: 14/04/2022
Copyright © 2022, All Rights Reserved.

Hisense B2B
1
Thank you for choosing our products. We are hoping that this manual can help you understand and to use
our products. We strive to be accurate and reliable when compiling the manual. We may modify or change
the contents of this manual at any time without prior notice. If you have any questions or suggestions in the
process of using, please feel free to contact us, we will contact you as soon as possible. We sincerely
appreciate your suggestions.
Table of Contents
1Foreword....................................................................................................................................................... 3
1.1 Product
overview ................................................................................................................................... 3
1.2 Content ................................................................................................................................................. 3
1.3 Operation instructions ..........................................................................................................................3
2Safety Caution ............................................................................................................................................... 3
2.1 Before Installation.................................................................................................................................
3
2.2 Power Voltage....................................................................................................................................... 4
2.3 Avoid Water .......................................................................................................................................... 4
2.4 No Touch............................................................................................................................................... 4
2.5 Avoid Open Flame................................................................................................................................. 4
2.6 Installation Place................................................................................................................................... 4
2.7 Cooling Performance ............................................................................................................................
4
2.8 Clean or Maintenance........................................................................................................................... 4
2.9 Cleaning ................................................................................................................................................ 4
2.10 Expert Engineer Required .....................................................................................................................4
2.11 Avoid Touching Electric Device.............................................................................................................. 5
3Power cable................................................................................................................................................... 5
4Overall
size （ mm ） ....................................................................................................................................... 6
5Technical parameter...................................................................................................................................... 7
6Diagram ......................................................................................................................................................... 7
6.1 3D View................................................................................................................................................. 7
6.2 2D View................................................................................................................................................. 8
6.3 Door opening ........................................................................................................................................ 8
6.4 Structure inside..................................................................................................................................... 8
6.5 Cable entrance hole ..............................................................................................................................9
7A/C Installation............................................................................................................................................ 10
7.1 A/C
Removal ........................................................................................................................................ 10
7.1.1 Open the A/C
door .......................................................................................................................... 10
7.1.2 Disconnect power cable to A/C....................................................................................................... 10
7.1.3 Take out A/C .................................................................................................................................... 10
7.1.4 Draw out tray and take out A/C ......................................................................................................11
7.2 A/C installation.................................................................................................................................... 11
7.2.1 Put A/C in the tray and fix it by rocker
............................................................................................11
7.2.2 Connect power cable to A/C as below ............................................................................................ 11
8Installation................................................................................................................................................... 12
8.1 Caution before installation.................................................................................................................. 12
8.1.1 Installation Place & Environment.................................................................................................... 12

Hisense B2B
2
8.2 Custom concrete foundation .............................................................................................................. 13
8.2.1 Foundation...................................................................................................................................... 13
8.2.2 Cable ............................................................................................................................................... 13
8.3 Installation Hole ..................................................................................................................................
14
8.4 Lift product ......................................................................................................................................... 14
9Power on testing ......................................................................................................................................... 16
9.1 safety testing....................................................................................................................................... 16
9.2 Power-on procedure ........................................................................................................................... 16
9.2.1 External power supply .................................................................................................................... 16
9.2.2 Switch off
power .............................................................................................................................. 16
9.2.3 Display status test ........................................................................................................................... 16
10 Thermal management................................................................................................................................. 17
10.1 Introduction ........................................................................................................................................ 17
11 Media player ............................................................................................................................................... 17
12 OS ................................................................................................................................................................ 17

Hisense B2B
3
1 Foreword
1.1 Product overview
The model 49SOA25PT is 49” outdoor totem with vertical screen, the sunlight readable LCD panel with IP65
enclosure is suited for any outdoor environment which can be widely used in commercial street, stadium,
scenic spots, hospital, schools, bus station, etc
1.2 Content
This manual is introduction for 49SOA25PT, include structure, technical parameters, installation, usage,
maintenance as well as troubleshooting.
1.3 Operation instructions
Please make sure installation and debugging is under the guidance of professional electrical engineers,
software engineers to prevent any personal injury or equipment damage due to improper operation.
2 Safety Caution
2.1 Before Installation
The product has air conditioner, please don’t lean during installation.

Hisense B2B
4
2.2 Power Voltage
Please make sure the power voltage at the construction site is compatible to the display.
2.3 Avoid Water
The kiosk has been tested to meet IP65 for outdoor environment, but please do not immerse the kiosk in the
water.
2.4 No Touch
Do not touch LCD display or cabinet which may scald due to long time sunlight exposure.
2.5 Avoid Open Flame
Do not install it nearby open flame area and no fire closed to the display.
2.6 Installation Place
Please follow the instructions and install it firmly on the ground or bracket to prevent any LCD damage.
2.7 Cooling Performance
There is air inlet & outlet in the rear of cabinet do not cover any object that will impact cooling performance.
2.8 Clean or Maintenance
Shut down power before clean or maintenance.
2.9 Cleaning
Use wet cloth to clean rather than liquid cleaners or aerosol cleaners direct on the monitor casing or glass.
2.10 Expert Engineer Required

Hisense B2B
5
Manufacturer has no responsibility for any damaged if some change or disassembling inside the cabinet
without any guidance from expert or engineers.
2.11 Avoid Touching Electric Device
Do not touch inside electric device when display is running, otherwise, manufacturer has no responsibility for
any personal injury
3 Power cable
The power cable is 3 meters if no particular request. The cable is placed in the bottom of cabinet under
display. Customer can use or change different cable length as per need, but the power cord diameter shall no
less than the standard cable. When connecting the external power supply, please note wire connection
correspondingly per the marks, ensure reliable earthing, must take guidance of professional electrical
engineers.
Do not touch, Caution
for high temperature
Caution for high voltage

Hisense B2B
6
4 Overall size(mm)
Power Cable

Hisense B2B
7
5 Technical parameter
Overall size
2000mmx780mmx450mm
LCD size
49”
Resolution
1080*1920
Brightness
2500cd/m2
Viewing angle
178°
Contrast ratio
3000:1
IP rating
IP65
Cooling system
Air conditioner
Working temp.
-40
℃～
+50
℃
Working Humidity
5%
～
100%
Working Voltage
220V±10%，50HZ
Consumption (max)
700W
6 Diagram
6.1 3D View
Speaker
Cabinet
LCD
Air inlet for air
conditioner

Hisense B2B
8
Rear door
Speaker
Installation
hold
Eyebolt
LCD
6.2 2D View
Door for A/C
6.3 Door opening
Step 1 Step 2 Step 3
Air ventilation for A/C

Hisense B2B
9
6.4 Structure inside
Fan
Android board Power
LCD
Switch
Reserved Space Power Socket
A/C
6.5 Cable entrance hole
3 cable entrance
hole for A/C power
cable, external
power cable and
LAN cable
Cable entrance hole
for LAN & Power
cable
Timer

Hisense B2B
1
7 A/C Installation
7.1 A/C Removal
7.1.1 Open the A/C door
A/C
7.1.2 Disconnect power cable to A/C
7.1.3 Take out A/C
Draw out tray
and take out
A/C
Unscrew
and
remove
Turn the
rocker down

Hisense B2B
1
7.1.4 Draw out tray and take out A/C
Tray
7.2 A/C installation
7.2.1 Put A/C in the tray and fix it by rocker
Rocker
7.2.2 Connect power cable to A/C as below

Hisense B2B
1
No less than 300mm
No less than 800mm to the rear of the cabinet
8 Installation
8.1 Caution before installation
8.1.1 Installation Place & Environment
This is floor standing mount, ensure the concrete must be solid and we propose custom concrete foundation.

Hisense B2B
1
8.2 Custom concrete foundation
8.2.1 Foundation
See size(mm) below to custom concrete foundation, the overall size should be larger than base plate size,
recommended depth of concrete>400mm,podium>20mm,please make cable entrance hole in
8.2.2 Cable
Pre-embedded cables and reserve 2m for LAN cable and power cable.
Embedded cables in
concrete

Hisense B2B
1
Drill
8.3 Installation Hole
After concrete foundation dry and solid, make 8x installation hole in ground by M16 drill.
M16
8.4 Lift product
Use crane or other tool to lift up product to the concrete and align to installation hole in concrete, make sure
the reserved cables pass through the entrance hole in base plate.

Hisense B2B
1
Step 1:
Install 4 eyebolt
Step 2: After installation, remove 4 eyebolts and replace it with rubber plug.
Step 3: Anchoring by dynabolt
dynabolt
Dynabolt into concrete
Cross like this

Hisense B2B
1
9 Power on testing
9.1 safety testing
Safety testing already done before shipping. If customers want to change wiring and other parts (like change
power cable, increase other electrical parts, etc.), please make safety testing before power-on to check any
short circuit. This operation shall be implemented under the guidance of professional electrical engineer with
multi-meter.
9.2 Power-on procedure
9.2.1 External power supply
Make sure voltage of power supply is compatible with the product before power on.
9.2.2 Switch off power
After switch off, the display is inactive state, the default state is switch on, please shut down and switch off
before maintenance
9.2.3 Display status test
The screen is in blue or playing content in normal condition and the internal fan start running.

Hisense B2B
1
10 Thermal management
10.1 Introduction
The product with air conditioner cooling, when inside temperature up to a certain degree the A/C will start
working, please clean the mesh in air vent after long time running.
11 Media player
Android media player (2G+16G) with HDMI IN port.
12 OS
Android OS.