Hisense H780SB-IDL Mounting instructions

TYPE NUMBER:
H780SB-IDL

Contents
Safety and warning information…........2
Installing your new appliance………....8
Description of the appliance….......….10
Display controls…………………...…..11
Using your appliance……………........17
Helpful hints and tips………………
Cleaning and care……………………22
Troubleshooting………………………26
Disposal of the appliance……………28
2
For your safety and correct usage before installing and first
using the appliance, read this user manual carefully, including
its hints and warnings. To avoid unnecessary mistakes and
accidents, it is important to make sure that all people using the
appliance are thoroughly familiar with its
operation and safety features. Save these instructions and be
sure that they remain with the appliance if it is moved or sold,
so that anyone using it throughout its life, will be properly
informed on its usage and safety notices.
For the safety of life and property, keep the precautions of
these user's instructions as the manufacturer is not
,
responsible for damages caused by omission.
Hisense Refrigerator
Safety for children and others who are vulnerable people
According to EN standard
According to IEC standard
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
24

3
Hisense Refrigerator
Keep all packaging away from children as there is risk of
suffocation.
If you are discarding the appliance, pull the plug out of the
socket, cut the connection cable (as close to the appliance
as you can) and remove the door to prevent children playing
from suffering an electric shock or from closing themselves
inside it.
If this appliance, featuring a magnetic door seals, is to
replace an older appliance having a spring lock (latch) on the
door or lid, be sure to make the spring lock unusable before
you discard the old appliance. This will prevent it from
becoming a death trap for a child.
General safety
WARNING —This appliance is intended to be used in
household and similar applications such as
-staff kitchen areas in shops, offices and other working
environments;
-farm houses and by clients in hotels, motels and other
residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
WARNING — Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance.
WARNING — If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING — Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING — Do not use mechanical devices or other
means to accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the
food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
WARNING — Fill with potable water only.

4
Hisense Refrigerator
WARNING — The refrigerant and insulation blowing gas are
flammable. When disposing of the appliance, do so only at
an authorized waste disposal centre. Do not expose to
flame.
WARNING —When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING —Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
Refrigerant
The refrigerant isobutene (R600a) is contained within the
refrigerant circuit of the appliance, a natural gas with a high
level of environmental compatibility, which is nevertheless
flammable. During transportation and installation of the
appliance, ensure that none of the components of the
refrigerant circuit becomes damaged.
The refrigerant (R600a) is flammable.
If the refrigerant circuit should be damaged:
-Avoid opening flames and sources of ignition.
-Thoroughly ventilate the room in which the appliance is
situated.
WARNING — Refrigerators contain refrigerant andgases in
the insulation. Refrigerant and gases must be disposed of
professionally as they may cause eye injuries or ignition.
Ensure that tubing of the refrigerant circuit is not damage
prior to proper disposal.
Replacing the illuminating lamps
WARNING—The illuminating lamps must not be replaced by
the user! If the illuminating lamps is damaged, contact the
customer helpline for assistance.
This warning is only for refrigerators that contain illuminating
lamps.
:
WARNING Risk of fire / flammable materials

5
Hisense Refrigerator
Daily use
Do not store flammable gass or liquids in the appliance,
There is a risk of an explosion.
Do not operate any electrical appliances in the appliance
(e.g.electric ice cream makers,mixers etc.).
When unplugging always pull the plug from the mains
socket,do not pull on the cable.
Do not place hot items near the plastic components of this
appliance.
Electrical safety
1.The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged.
A crushed or damaged power plug may overheat and cause a
fire.
3. Make sure that you can access the main plug of the
appliance.
4. Do not pull the main cable.
5. If the power plug socket is loose, do not insert the power
plug. There is a risk of electric shock or fire.
6.You must not operate the appliance without the interior
lighting lamp cover.
7.The fridge is only applied with power supply of single phase
alternating current of 220~240V/50Hz. If fluctuation of voltage
in the district of user is so large that the voltage exceeds the
above scope, for safety sake, be sure to apply A.C. Automatic
voltage regulator of more than 350W to the fridge. The fridge
must employ a special power socket instead of common one
with other electric appliances. Its plug must match the socket
with ground wire.
It is dangerous to alter the specifications or modify this
product in any way.
Any damage to the cord may cause a shortcircuit, fire, and/or
electric shock.
This refrigerating appliance is not intended to be used
as a built-in appliance.

6
Hisense Refrigerator
Do not place food products directly against the air outlet on
the rear wall.
Store pre-packed frozen food in accordance with the frozen
food manufacture’s instructions.
The appliances manufactures storage recommendations
should be strictly adhered to. Refer to relevant instructions
for storage.
Do not place carbonated or fizzy drinks in the freezer
compartment as it creates pressure on the container,which
may cause it to explode,resulting in damage to the
appliance.
Frozen food can cause frost burns if consumed straight from
the freezer compartment.
Do not place the appliance in direct sunlight.
Keep burning candles,lamps and other items with naked
flames away from the appliance so that do not set the
appliance on fire.
The appliance is intended for keeping food stuff and/or
beverages in normal household as explained in this
instruction booklet. The appliance is heavy.Care should be
taken when moving it.
Do not remove nor touch items from the freezer
compartment if your hands are damp/wet,as this could cause
skin abrasions or frost/freezer burns.
Never use the base,drawers, doors etc. to stand on or as
supports.
Frozen food must not be refrozen once it has been thawed
out.
Do not consume ice popsicles or ice cubes straight from
the freezer as this can cause freezer burn to the mouth
and lips.
To avoid items falling and causing injury or damage to
the appliance, do not overload the door racks or put too
much food in the crisper drawers.
caution!
Care and cleaning

: Children aged from 3 to 8 years are allowed to load and
Hisense Refrigerator
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be too
close to a wall to avoid touching or catching warm parts
(compressor, condenser) to prevent the risk of fire, follow
the instructions relevant to installation.
The appliance must not be locate close to radiators or cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Service
Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician or
competent person.
This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
Installation Important!
For electrical connection carefully, follow the instructions
given in this manual.
Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you bought it. In
this case retain packing.
It is advisable to wait at least four hours before connecting
the appliance to allow the oil to flow back in the compressor.
Before maintenance, switch off the appliance and disconnect
the mains plug from the mains socket.
Do not clean the appliance with metal objects, steam
cleaner, ethereal oils, organic solvents or abrasive cleansers.
Do not use sharp objects to remove frost from the appliance.
Use a plastic scraper.
7
unload refrigerating appliances.(This clause applies only to the
EU region.)
Note

Installing your new appliance
Before using the appliance for the first
time, you should be aware of the
following tips.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
for the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Suggest: It is advisable for there to
be 50-70mm of space from the back to
the wall, at least 100mm from its top,
at least 100mm from its side to the
wall and a clear space upfront to allow
the freezer door to open 130°and
refrigerator door to open 1 .35°See
in follow diagrams. Please refer to the
diagrams below.
the
Relevant information (mm)
Note:
This appliance performs well in the
climate class from SN to ST. It may
not work properly if being left at a
temperature above or below the
indicated range for a long period.
Stand your appliance in a dry place
to avoid high moisture damage.
Keep the appliance out of direct
sunlight, rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
8
908 387.1 610.7 1152.5
W2
266.7
DD1

adjusta e bottom f etbl e
adjusta e bottom f etbl e
Warning!
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. Please use a
suitable spanner.
To allow the doors to self-close, tilt
back the top backwards at about
15mm or 0.5 by turning the°
adjustable feet.
Whenever you want to move the
appliance, remember to turn the feet
back up, so that the appliance can roll
freely. Reinstall the appliance when
relocating.
9
15mm
0.5

View of the appliance
Description of the appliance
Note: Due to constant development of our products, your refrigerator may be
slightly different from this Instruction Manual, but its functions and usage
remain the same.
19.humidity control cover plate
2.Ice-Maker Front Cover Assembly
3.Ice Bucket Assembly
4.Wind channel cover in freezer
5.Freezer shelf
6.Freezer door Rack
7.Freezer upper drawer
9.Freezer lower drawer
10.Left adjustable bottom feet
18.Fridge upper drawer
20.Fridge lower drawer
21.Right adjustable bottom feet
10
Note:To get the best energy efficiency of this product, please place all shelves,drawers on
their original position as the illustration above.
1.Freezer zone LED light
14.Multifunctional drawer part
8.Freezer drawer cover plate
11.Fridge zone LED light
12.Fridge door Rack
13.Wind channel cover in fridge
15.Water storage box part
17.Fridge shelf
16.Bottle rack
22.WiFi module
22

•
•
Display controls
11
The control panel consists of two areas. The middle of topside shows conditions
of the appliance surrounded by 6 icons as well as keys. And the bottom side is
three keys related to ice maker.
setting.
setting reverts back to the previous
icons on the display panel will be lit for
Once the appliance is powered on, all
Child Lock is off and the temperature
3 seconds with a buzzer sound. The
Note:
"Crushed", and "Water" will go off on
All the icons except "Cubed",
and all doors closed for one minute.
the condition of all keys untouched
the door is open or you touch any
The control panel will light up when
button.
•
depending on how much food stored
from those displayed on the panel,
average temperature of the whole
The temperature only means the
inside each compartment may vary
refrigerator cabinet. Temperatures
Caution!
and where the refrigerator is placed.
from higher room and lower room
In addition, the actual temperature
will be different.
running at high temperature will
NOTE: Setting the refrigerator
accelerate food decomposition.
we recommend that when starting
For optimum food preservation,
the refrigerator for the first time,
the temperature of fridge is set to
4 , and that of the freezer to
-18 .
℃
℃

1.
12
"Child Lock and Door Alarm"
to lock the Control Panel including
Press and hold "Alarm" for 3 seconds
locked, the icon " "will be illuminated,
dispenser function. If Control Panel is
and none of the keys on the Control
This key serves two purposes:
Panel work.
Child Lock
To unlock the Control Panel, please
press and hold "Alarm" for 3 seconds
again.
2.
for over 2 minutes will trigger door
Opening the fridge door or freezer door
the buzzer rings 3 times per minute.
alarm. The " " icon starts to wink and
Touching the "Alarm" key during door
alarm, the " " icon will be on and
Door Alarm
buzzing will stop. Closing all the doors,
the " " icon will go off and buzzing will
stop. In addition, door alarm will stop
automatically after 10 minutes.
"Ice Control"
"Ice Off" key.
be switched on or off by touching the
the ice maker function. When it is on,
This " " icon shows the condition of
the ice maker function is off; while it is
off, the function is on. This function can
indicates that the ice maker function is
Note: When the " " icon is on, it only
off, but the dispenser still works.
"Fridge temperature control"
temperature setting function of fridge,
Touch the "Fridge" key to activate the
the temperature will be set according
After that, touch the key continuously,
to the following sequence:

13
set to 2 . "Super Cool" mode will be
hours, and the fridge setting will revert
switched off automatically after 6
back to the previous setting. Touch
seconds, and the " " icon will be lit,
Press and hold the "Fridge" key for 3
in the mode of "Super Cool". On that
which shows that the fridge is running
condition, the tem[perature of fridge is
℃
the "Fridge" key or "Eco" key so that
the refrigerator can quit "Super Cool"
in advance.
Note: By touching "Fridge" key, the
refrigerator setting will revert back to
the previous setting, while by touching
"Eco" key, the refrigerator will run in
the function of "Eco".
"Freezer temperature control"
temperature setting function of freezer,
Touch the "Freezer" key to activate the
the temperature will be set according
After that, touch the key continuously,
to the following sequence:
Note: By touching "Freezer" key, the
refrigerator setting will revert back to the
previous setting, while by touching
"Eco" key, the refrigerator will run in the
function of "Eco".
"Dispenser control"
When the freezer door is open or the
Child Lock is on, the dispenser will not
work.
The Ice Type button includes "Cubed"
and "Crushed" options. Press the
"Cubed" key or "Crushed" key to choose
the type of ice to be dispensed. Or touch
the "Water" button to activate the water
mode.
Press and hold the "Freezer" key for 3
seconds, and the " " icon will be lit,
which shows that the fridge is running in
the mode of "Super Freezer". On that
condition, the tem[ perature of freezer is
set to -24℃.If the freezing capacity
according to the rating plate is to be
used, switch on Super Freezer at least
24 hours before the fresh products are
placed in the freezer conpartment.
"Super Freezer" mode will be switched
off automatically after 5 2 hours, and
the freezer setting will revert back to the
previous setting. Touch the "Freezer"
key or "Eco" key so that the refrigerator
can quit "Super Freezer" in advance.

14

"Energy Save"
Touch this button to turn Energy Saver
mode on or off. When it is on, the
Energy Saver icon " " will be
The temperature of the fridge is
automatically switched to 6 while the
17 
 . When Energy Saver is
off, the icon goes off.
Note!
If water is not dispensed or dispensed
slowly, please check whether the water
storage box is correctly installed or not
The light will go off without touching
any button or the doors have been
closed for one minutes.
and make sure there is enough water
in the water storage box.
"Water storage box Alarm"
If the water storage box is not correctly
installed or not installed, the water
storage box alarm will appear. Clear
the alarm by pressing and holding
"Eco" button for 3 seconds.
When touching the Ice Type button,
the cubed or crushed ice mode chosen
will be activated, and the Cubed " "
or Crushed " " ice icon lights up.
If there is no ice requirement, please
turn the function off to save water and
energy consumption. (See Ice Off
above.)
If you need water, [please touch the
"water" button, and the water icon
" " will light up.
℃
℃
freezer to -
illuminated.
Wi-Fi function
This appliance may be controlled
remotely with a smart phone or a tablet
computer. If the appliance is not
connected to the home network, it will
function like a regular appliance.
What do you need to connect the
appliance
?
Signal from the local wireless network
(Wi_-Fi) should be sufficiently strong in
the spot where the appliance is installed.
Home network router has to be
connected to the internet, and the Wi-Fi
function on the appliance should be
activated.
The smart phone/tablet computer has
to be connected to the internet.
Operating system on your smart
phone/ tablet computer should be
compatible with the ConnectLife app.
ConnectLife App
The ConnectLife App is available to
download free of charge from the Apple
App Store or from the Google Play
Store.
Installing the ConnectLife app
1. Go to the App Store (on Apple
devices), AppGallery (on Huawei
devices) or Google Play Store (on
Android devices) on your phone/tablet
computer.
2. Search for " ConnectLife".

15
3. Choose the ConnectLife app and
install it on your smart phone/tablet
computer.
INFORMATION!
We recommend downloading and
installing the mobile app and creating
a ConnectLife account before
attempting to set up the connection
with your appliance.
After activating the Wi-Fi function,
connect your device to your home
router in order to connect your
appliance with the ConnectLife mobile
app.
Step 4: When the Wi-Fi symbol is on, it
means that the Wi-Fi connection is
successful. The display will return to
normal.
PAIR APPLIANCE
The appliance can be paired with your
mobile device. Simply pair another user
to your appliance. This requires, that
your appliance was already set up
before and is connected to your home
network. If not, go back and select
CONNECTION SETUP.
Step 1: Set the appliance to normal
operation. Touch the Wi-Fi icon for
approximately 3 seconds. You entered
network connection menu when ' -- '
CONNECT APPLIANCE TO Wi ----------------Fi
2. Search for " ConnectLife".
Step 1: Set the appliance to normal
operation. Touch the Wi-Fi icon for
approximately 3 seconds. You entered
network connection menu when '--'
appears in the display.
Step 2: Touch the Fridge key to select
'0 ' within 6 0 seconds.
Step 3: Touch the Wi-Fi icon to confirm
the selection mode. The Wi-Fi symbol
starts blinking and the network of this
appliance is now open to connect to, for
5 minutes.
Step 2: Touch the Fridge key to select
' P ' within 6 0 seconds.
Step 3: Touch the Wi-Fi icon to confirm
the selection mode. The PAIR network
of this appliance is now open to
connect to, for 5 minutes.
Step 4: When the display returns to
normal, it means the PAIR connection
is successful.

UNBIND ALL PAIR APPLIANCE
By activating this function, the
appliance will be removed from all
paired app user accounts.
Step 1: Set the appliance to normal
operation. Touch the Wi-Fi icon for
approximately 3 seconds. You entered
network connection menu when ' -- '
appears in the display.
Step 2: Touch the Fridge key to select
' 8 8 ' within 6 0 seconds.
Step 3: Touch the Wi-Fi icon to confirm
the selection mode to realize unbinding.
and the distribution network time is up
to 5 minutes.
Step 4: After the device is unbound, it
will automatically enter the distribution
network state, the Wi-Fi icon flashes,
16
Note!
The control panel will light up when
the door is open or you touch any
button.
The light will go off without touching
any button or the doors have been
closed for one minutes.
When the refrigerator is powered
on, all the icons of the control panel
will light up for 3 seconds, and a
buzzer sounds. The Child Lock is off.
And the temperature setting reverts
back to the previous setting.
As the application continues to be
upgraded, please refer to the actual
display interface.
User manual:
Transmitting frequency band(s) and
max allowed transmitting power in the
operating frequency band(s):
2040-2483.5MHz,less than or equal
to 20dbm.
This equipment should be installed
and operated with minimum distance
20cm between the radiator & your
body.

This section tells you how to use most
of the useful features. We recommend
that you read through them carefully
before using the appliance.
1. Adjust the door
When you found the doors are not at
the same level, you can use a
screwdriver to adjust the fridge door.
When the freezer door is higher than
the fridge door. First, you can use the
spanner to turn the bolt anticlockwise
on the lower hinge that can raise the
fridge door. Once in position use the
spanner to lock the nut.
When the freezer door is lower than
the fridge door. You should use the
spanner to turn the bolt clockwise to
make the fridge door go down. Once
in position lock in place.
2. Using your refrigerator compartment
The refrigerator compartment is
suitable for storage of vegetables and
fruit. Food inside should be packed to
store in order to avoid losing moisture
or flavor permeating into other foods.
Caution! Never close the refrigerator
door while the shelves, crisper and/or
telescopic slides are extended. It may
damage both them and the
refrigerator.
Glass shelves and Door racks
The refrigerator compartment is
provided with glass shelves
and several different door racks,
which are suitable for the storage of
eggs, canned liquid, bottled drinks
and packed food. They can be placed
at different heights according to your
need. But do not place too many
heavy things in racks. Before you lift
up the door shelf vertically, please
take the food out.
several
Note: The door racks and shelves
can be taken out to be cleaned.
②nut
①bolt
③spanner
Using your appliance
Only the fridge door can be adjusted.
17

,
,
position.
Note
Caution:
SODA,JUICE,MILK,ALCOHOL,
① Pull out the water storage box
②Lift the front small cover,and then
inpouring directly
③ Refiting the water storage box on
the fridge shelf
It is for providing water for ice maker
and water dispenser. You can inpour-
ing water into the water storage box
by following steps:
18

Bottled or canned liquid are at risk of
exploding caused by volume
expansion and so should not be
stored in the freezer compartment.
4. Using the dispenser
You can choose the type of ice or
water by touching the “Cubed” or
“Crushed” or “Water” button.
When you choose ice type, push the
dispenser gently with your cup. Ice
will be released from the dispenser.
Make sure the cup is in line with the
dispenser, and the ice exactly fall into
the cup.
If you select Cubed Ice after using
the Crushed Ice feature, a small
amount of residual crushed ice might
fall into your cup.
Do not removing your
cup or glass from under the dispenser
after dispensing water or ice you
need. You should be wait for 2 or 3
seconds to prevent spills.
immediately
Do not pull the lever out as this could
damage or break the lever’s spring.
The dispensed water is cool, not icy
cold. When you want colder water with
ice, dispense ice to your glass first,
then fill with water from the dispenser.
Note:
Do not dispense ice continually more
than one minute during normal use to
avoid the excessive temperature on
the ice crusher motor.
Drawers
.
3.
, , ,
Caution
19

5. Using the Ice Bucket
If you want to remove the Ice Bucket:
Please hold the handle as shown in
the figure below. Then lift up and pull
the Ice Bucket out slowly to prevent
damage.
Note!
When the ice maker dumps ice into
the bucket, any sounds you hear are
part of normal operation.
If you do not dispense ice for a
long periods of time, Ice may clump
in the Ice Bucket. If this occurs,
please remove all the ice and empty
the bucket.
If ice doesn’t come out, please
check for any ice stuck in the chute
and remove it. Or pull out the Ice
Bucket and check for any ice cubes
clump, then remove them.
Ice chute
Ice Maker Cover
Ice Bucket
If you are going on a long vacation
or business trip and won’t be using
the ice dispensers for period of time,
please close the water valve to
prevent leaks.
①L the Ice Bucketift up
②Pull the Ice Bucket out slowly
Removing Steps:
B
B’
A
A’
When you put it back, please make
sure the two side(B&B’) of Ice Bucket
is wedged into the buckles(A&A’).
①
②
Installing Steps:
①
the two side(B&B’) of Ice Bucket
wedge into the buckles(A&A’).
②Pull the Ice Bucket down, and make
sure the Ice Bucket is held the bracket
firmly.
Push the Ice Bucket up, and make
①②
Pull out
A
B
A
B
Push up
If the refrigerator has been power-
off too long,the ice in the bucket will
melt ,and the water will flow out of the
refrigerator to the floor.To avoid
this,you should remove all the ice in
the bucket .
20