Hisense U5120G User manual

Quick Start Guide
1
What’s in the Box
Remote Control
AC power Cord *
x 2
Main Unit
Remote Control /
AAA Batteries x 2
Wireless Subwoofer
Wall Mounting Screws (x2) / Brackets (x2) /
Bracket Screw (x4) / Wall Anchors (x4)
User Manual /
Quick Start Guide
HDMI Cable
5.1.2CH Soundbar with
Wireless Subwoofer
Model: U5120G
* Power cord quantity and plug type vary by regions.
Replace the Remote Control Battery
1 Press and slide the back cover to
open the battery compartment of the
remote control.
2 Insert two AAA size batteries
(included). Make sure the (+) and (–)
ends of the batteries match the (+)
and (–) ends indicated in the battery
compartment.
3 Close the battery compartment cover.
- Do not mix old and new batteries;
- Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
1Switch the unit between ON and
STANDBY mode.
2Select the play function.
3SURR Adjust the surround ON/OFF.
4(BT) Select the Bluetooth mode. Press
and hold the (BT) button to
activate the pairing function in
Bluetooth mode or disconnect the
existing paired Bluetooth device.
5EQ Select a preset sound eect.
6/ Skip to previous/next track in BT /
USB mode.
7VOL+/- Increase/decrease the volume level.
8Play/pause/resume playback in BT
/ USB mode. Press and hold the
button for 3s to enter setup menu.
Conrm a selection.
9BASS+/- Adjust bass level.
10 TREBLE+/- Adjust treble level.
11 DIMMER+/- Adjust display brightness.
12 (MUTE) Mute or resume the sound.
1
3
7
9
2
4
5
6
8
11
10
12
OPTICAL Cable

98 10 11 12
6
45
1 2 3
13
7
1 2 3
98 10 11 12
6
45
1 2 3
13
7
1 2 3
2Identifying the Parts
Main Unit
1(ON/OFF) button
Switch the unit between ON and Standby mode.
2(SOURCE) button
Select the play function.
3VOL+/VOL- buttons
Increase/decrease the volume level.
4Display Window
Show the current status.
5Remote Control Sensor
Receive signal from the remote control.
6Screws
Remove the screws then install the wall mounting
screws into the back of the unit.
7USB Socket
Insert the USB device to play music.
8TYPE-C Socket
For the Dongle of wireless rear surround speaker.
The surround kit needs to be purchased
separately. This port can't be used to connect to
other Type C devices.
9OPTICAL Socket
Use to connect to the OPTICAL OUT socket on an
external device.
10 COAXIAL Socket
Use to connect to the COAXIAL OUT socket on an
external device.
11 HDMI OUT (TV eARC/ARC) Socket
The port for connecting a TV. The port supports the
eARC/ARC HDMI feature, which allows the soundbar
to play audio that originates on the connected TV.
12 HDMI IN (1/2) Sockets
Two HDMI ports for connecting HDMI source
devices, such as a DVD player, Blu-ray Disc™
player, or gaming console. Note that only one
HDMI input is usable at a time.
13 AC~ Socket
Connect to power supply.
Wireless Subwoofer
1AC~ Socket
Connect to power supply.
2PAIR button
Press activate the pairing function between the
main unit and the subwoofer.
3PAIR Indicator
Light stops blinking once the Subwoofer is
paired with the Soundbar.

3
4
HDMI eARC HDMI IN
OPTICAL COAXIAL
43 1 2
Surround
Blu-ray Player / DVD Player /
Recorder / Set-top Box...
HDMI OUT
Connections
◎
Pair up with the subwoofer
The subwoofer and the soundbar will be paired automatically when both are powered on.
If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.
Bluetooth Operation ( )
1
2
!
<6m
1
2
< 8m
Settings Bluetooth
Bluetooth
DEVICES
Hisense U5120G
Now Discoverable
Connected

5
6
1156mm
1
3
2
4

SS

SS
Setup Menu
Wall Mounting
1. During ON mode, press and hold the button for 3 seconds to open the menu.
2. Select the content with / buttons.
3. Change the initial values for each of the settings with VOL +/- buttons.
4. Press the button to conrm your selection and exit the settings.
• If no button is pressed within 15 seconds, the system will automatically exit the menu.
Display
(press / )
Description
(press VOL + / - )
1
Select Equalizer (EQ) Eect.
(MUSIC, MOVIE, NEWS, SPORT,
NIGHT, GAME, AI EQ)
2Switch Surround Sound
[ON / OFF]
3Adjust the Bass Level
4Adjust the Treble Level
5Adjust the Brightness
(Exit menu to take eect)
6Switch Auto Wake
[ON / OFF]
7Switch Auto Standby
[ON / OFF]
8If there is no surround
connection. Not adjustable.
If there is surround
connected. Adjust the
surround speakers Volume
9Set the Audio Delay
(AV SYNC)
10 Switch: HI-RES Remaster
[ON / OFF]
11 Switch: Dts Neural
[ON / OFF]
12 Switch: Dts Drc Heavy / Dts
Drc Mid / Dts Drc Min
13 Dts Dialog Control Value
Display
(press / )
Description
(press VOL + / - )
Hisense_U5120G_QSG_US_V1 _220310