Hisense WFBL9014VS Owner's manual

WFBL9014V/WFBL9014VS
1000
1000
1200
1000
600
600
1400
1400
1400
The program is suitable for jeans.
1000
600
1000
2
3
2
3
1
1000
4.0
1.0
2.0
2.0
2.0
4.0
9.0
4.0
9.0
9.0
4.0
4.0
A
B
C EFHIJ DG
A. “On/Off” button
B. “Start/Pause” button
C. Program selector
D. Program and function status display window
E. “Delay End” button
F. “Options” button
G. “Favourite” button
I. “Rinse” button
J. “Temp” button
H. “Spin” button
This washing machine is equipped with automatic safety
functions which detect and diagnose at an early stage and
react appropriately.
Program
Care Label
Maximum
spin speed
spin speed rpm
Wash Program Functions
Detergent Compartment
Material / Level of Soiling
-Washing temperature selected as per the Care Label instruction. kg
Maximum
Wash Load
Softener
Main wash
Prewash ECOPrewash Intensive
Delay end
Temp.
Default
rinse
times
Cotton(2)
--,20ºC, 30ºC, 40ºC,
60ºC, 95ºC
Heavily and moderately soiled cotton, or linen.
For very heavily soiled items select the "Prewash" function.
Synthetics
--,20ºC,30ºC, 40ºC,60ºC
Moderately soiled synthetics, cotton blended fabrics.
30
30
30
Quick 15’
--
,20ºC ,30ºC,40ºC Cotton, mixed fabrics. Items worn for a short time or newly bought.
Silk/Delicate
--
,20ºC ,30ºC,40ºC Soft delicate fabrics and machine washable silk. (Refer to the washing label attached to the clothing).
Wool
--
,20ºC ,30ºC,40ºC Machine washable wool. (Refer to the washing label attached to the clothing).
Skin Care
--,20ºC, 30ºC, 40ºC,
Extra rinse time. Making sure no residual detergent on textiles to protect skin form irritability.
--,20ºC, 30ºC, 40ºC
Sportswear
Dark Wash
Sportswear and leisure wear made from microfibre fabrics.
Shirts Non-iron shirts or blouses made of cotton, linen, synthetic fibres or blended fabrics.
--,20ºC, 30ºC, 40ºC,60ºC
Jeans
--,20ºC,30ºC,40ºC,60ºC
The program is suitable for nigh wash, humming is shut off and spin speed is reduced.
Drum Clean
95ºC
Program to remove dirt and bacterial residue that can breed in the machine after it has been used for
a period, especially when low temperature washes are used regularly.
Rinse +Spin
Spin
This program is defaulted to two rinses and spin.
Select the length, and speed, of the spin manually.
: Optional Functions Yes : Detergent Required : Cannot be selected -- : Temperature of unheated water
(1) Wash performance test programs are: cotton 60˚C, maximum speed; cotton 40˚C, maximum speed. (2) Please select appropriate washing temperature according to instruction of care label attached to clothes, if not, clothes can be damaged
(3)Energy consumption 170 kWh per year, based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.Water consumption
9900 litres per year, based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Quick User Manual
1400
4.0
Mix
--
,20ºC ,30ºC,40ºC Mixed loads of moderately soiled cotton and synthetic fabrics. Yes
Program to effectively extinguish bacteria in textiles. It is appropriate for clothes of babies who are
sensitive to clothes.
Baby Care
--,20ºC, 30ºC, 40ºC,
1400
3
4.0
Yes
Machine-washable items stuffed with synthetic fibres, such as pillows,
quilts and bedspreads; also suitable for items stuffed with down.
--,20ºC, 30ºC, 40ºC
Duvet 600
2.0
Yes
Ironing Spin
--,20ºC, 30ºC, 40ºC,60ºC
3

X08080605B
PARAMETER
Washing Capacity
Max.spin speed
Net Weight
Dimension(WXDXH)
Rated Voltage
Heating Power
Washing Power
Model
9.0kg
1400rpm
73kg
595X610X845mm
220 -240V
1900W
100W
WFBL9014V/WFBL9014VS
Load the clothes to be washed in the drum and close the door.
Add the detergent into the relevant compartments for the type
of program you are going to select, Add detergent as described
in Detergent and Additives section of User's Operation
Manual.
1.Press the “On/Off” button.
Add Detergent, Close the Door and Set the Program
3.Select washing temperature, spin speed and times of extra rinse
by pressing “Temp”, “Spin” and “ Rinse” buttons.
2.Spin program selection button to required program, start up and
default the program as “Cotton”.
4.Press “Options” button to select additional functions.
5.After starting the program, display window displays program
length (hours: minutes), rinse times, washing temperature
and additional function options in sequence.
·Select the function to conduct pre-wash so as to enhance washing
effects and better remove stains. This function is suitable for
heavy dirt clothes.
·Before inflowing, laundry detergent/ washing powder can be
added to pre-wash box, and washing powder must be added to
main wash box.
At standby state, press “Options” button to select additional
function for current program. Select only one function for each
press, and then corresponding icon flashes. After starting up,
program cannot be changed.
·The function can be selected to prolong washing time, strengthen
washing effects and better remove stain.
If tap is not opened, or water pressure is over low, inlet water
fault icon will display, and display screen will prompt “F01” to
give alarm.
Inlet water warning
If the pipe is squeezed, drainage will not be smooth. In case of
failing to completely drain for long time, drainage fault icon will
display, and display screen will prompt “F03” to give alarm.
Drainage warning
·After completing program, door lock unlocks automatically.
During pause, if door opening condition can be met halfway,
the door lock will unlock and its indicator light will go out.
·When door lock indicator light flashes, door shall not be opened
forcibly so as to avoid personal injury.
After the program starts the Door Lock icon will light up and
the door will be locked.
Door Lock Icon
Addition function selection
Pre-wash
ECO
Intensive
Delay end Function
Washing machine displays “----” after startup, indicating that it
is weighing automatically. It will adjust program length (hours:
minutes) automatically according to weight of clothes.
Mute Function
Automatic weighting
Rinse
To strengthen the safety of children, this machine is equipped
with Child Lock function.
When the programme starts, press “Temp. +Rinse”
button for 2 seconds. Child Lock icon will light up, and then
Child Lock is set up. Repeat the same operation, the Child
Lock will be released.
•When the Child Lock is set, all function buttons will be
shielded.
•When you turn the machine off by pressing the “On/Off”
button, child lock is released.
•
After completing program, child lock will automatically
unlock.
Child Lock
After you have selected your options and placed detergent
withinthe detergent dispenser, turn on the water tap and press
the “Start / Pause” button. The screen will display the current
program progression with icons from left to right. It also
displays the remaining program time.
To Start the Program
1.Press the “On/Off” button for 2 seconds to turn off the
machine.
2.Press “On/Off” button to turn on the machine. Select the
new program and options.
3.Press “Start / Pause” to start the new program without adding
any extra detergent.
To Cancel the Program or Reselect the Options
When programme finished its running, it will display “End”.
If no operation is taken in 2 minutes, the machine will turn
off automatically.
1.Press “On/Off” button for 2 seconds to turn off the machine;
2.Close the tap;
3.Open the door and take the washed clothes out;
4.Slightly open the door to remove moisture in the pump.
End of the Program
Programme Instructions
Main Wash
Duration (Min)
Programme
(Min)
Energy
Consumption
(kWh)
Water
Consumption –
Main Wash (L)
Total Water
Consumption (L)
165 192 193
215 245 260
0.64 0.80 0.80
15.0 15.0 20.5
41 41 51
Remain moisture
content (%) 50 51 50
1. The standard 60℃ and 40℃ cotton programmes,referred to
as ‘standard 60℃ cotton programme’ and ‘standard 40℃ cotton
programme’,and that they are suitable to clean normally soiled
cotton laundry and that they are the most efficient programmes
in terms of combined energy and water consumptions for
washing that type of cotton laundry,in addition,the actual water
temperature may differ from the declared cycle temperature.
2. The power consumption of the off-mode is 0.49W,and of
the left-on mode is 0.49W.
3. The type of detergents suitable for the various washing
temperatures.
4. The information of standard programmes:
Favourite
After setting the ironing and dehydration function, the maximum
dehydration speed shall not exceed 1000 rpm.
The function cannot be selected if the speed over 1000 rpm has
been selected before this function being set.
Ironing Spin
Delay end function allows to run the machine at the consumers’
convenience, for example, at night when electricity is cheaper.
•The delay time must be longer than the wash program length
as the delay time is the time program will finish. For example:
if the selected program time is 02:28, the delay time selected
must be between 03:00 and 24:00.
•
Only under the standby mode, this button is valid for
selecting the reservation time.
• After the reservation function is selected, the time will
increase 1h when each time the reservation button is pressed.
Before reservation, if the program time does not satisfy the
integral multiple of 1h, it shall be completed by pressing the
reservation key for the first time, and then the time increases
1h when each time the reservation button is pressed. If the
reservation is selected, before the program runs, the current
reservation can be canceled by turning the button to select
other programs.
• When the reservation process is operated, the icon of
‘reservation time’ will be on. When the reservation process
is finished, the icon of ‘reservation time’ will be off, while
the icon of the ‘remaining time’ will be on.
Reload in Process
If you want to reload clothes in the process of washing, please
press “Start/Pause” button.
•If reload icon light up, the door can be opened in the
process, remaining time and the Door Lock icon in display
will flash. Then the Door Lock icon will go out, and the door
can be opened.
•If reload icon doesn’t light up, the Door Lock icon
doesn’t flash, it indicates that current temperature is over 50℃
or you have passed the time for reloading in the process, namely
no clothes allowed to load into the machine.
· The ECO indication lamp is on after the function is selected, the
indication lamp and “:” will flicker synchronously from the start to
end of the program, and the indication lamp will be off after the
program ends.
·The ECO function is only added under the standby state of its
applicable program, that is, before the program is started. After the
program is started, the function cannot be selected.
After setting the Rinse function, add a rinse process for one time
before operating the softening program, so the total operating time
correspondingly increases.
This function is selected in standby state and cannot be changed
after starting.
After selecting the program, the default rinse times (including
softening) will light up. Each time the Rinse key is pressed, one
time rinse will be added to the default rinse times, increasing to 5
times at most.
After selecting the program and setting each parameter, long press
the Favorite key for 3s to memorize the selected program,
temperature, rotational speed and other related settings, and then the
Favorite symbol lamp will be on; at this moment, if switching the
program or pressing other keys, the panel will display a new program
and parameters, and the Favorite symbol lamp will be off.
Under the circumstance that the Favorite lamp is not on, short press
the Favorite key, then the program will be switched to the program
memorized last time; and meantime, the temperature, rotational speed
and other parameters will automatically change into the parameters
memorized last time.
When the user uses it for the first time, if he/she has never long
pressed the Favorite key to collect programs, he/she can short press
the Favorite key and then the cotton linen program and its default
settings will be collected by default.
·The weighing function will be cancelled, the temperature be
reduced by 5℃and the main wash time be reduced after the
function is selected.
When the machine is in the state of holding, pause or operation,
press “Rinse+ Spin” buttons for 2 seconds, The display will show
“bEEP oFF” . All the buzzing will be turned off except the alarms.
When the machine is in the mute state, press “Rinse + Spin”
buttons for 2 seconds until
“bEEP on” appears. All the
buzzing will be activated.