Hisense W10630786B Mounting instructions

说明书
80g双胶纸
海信出口SE系列滚筒
W10630786
W10630786
版本号
设 计
审 核
工 艺
标准化
更改单编号
会 签
会 签
批 准
图形识别符号
重 量 比 例
第 1 张 共 23 张
BECH-2014H-0048
技术要求
1.材料：80g双胶纸，正反面印刷；
2.印刷为黑白色单色印刷；
3.所有印刷内容正确、清晰，不得有漏印、误印，无印刷缺陷；
4.幅面：（210±3）X（145±3），（单位：mm）；
5.未注公差按照GB1800(现行).IT15；
6.颜色及整体效果必须经过研发部确认后方能生产，产品检验以封样件为准；
7.符合RoHS现行标准要求和REACH指令。
后附图纸11页

USER’S OPERATION MANUAL
Before operating this unit, please read this manual thoroughly,
and retain for future reference
W10630786B

21
ensure
Ensure
Single inlet -
Dual inlet -
reused. They should be discarded.
and cold
only
Ensure that the ventilation openings in the base of the washing machine
(if available on your model) are not obstructed by a carpet or other material.
NOTE
The manufacturer reserves the right for any modifications on
the product which might be deemed necessary or useful
without informing about it in this IFU.
Thank you for choosing a Hisense washing machine.
Before operating your new washing machine, please read
this instruction carefully, and keep it for future reference.
Please make sure the socket is grounded securely, the water
source connection is reliable. The manufacturer declines all
liability and warranty for damage to property or injury to
persons or animals due to non-compliance with the directions
given in this instruction.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without
supervision.
Children of less than 3 years should be kept away unless
continuously supervised.

3
The symbol on the product, or on the documents accompanying the product,
indicates that this appliance may not be treated as household waste. Instead it
shallbehandedover to theapplicablecollectionpoint for therecyclingof electrical
and electronic equipment. Disposal must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed information about
treatment, recovery and recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased
the product.
4
that
the
ing
that
en the
from the mains supply,
,

Control panel layout and
appearance will depend on the model.
5 6
Clean the outside of the washing machine with a damp cloth. Do not use abrasive
detergents.
Never open the door forcibly or use it as a step.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Childen should be supervised to ensure that they do not play with the appliance.
Children must not be allowed to play with the appliance or to climb into the drum (see
also the following chapter “Child Safety”).
If necessary, the power cable may be replaced with an identical one obtained from our
After-Sales Service. The power cable must only be replaced by a qualified technician.
1. Sort the laundry according to...
Type of fabric / care label symbol
Cottons, mixed fibres, easy care/synthetics, wool, handwash items.
The wool wash cycle of this machine has been tested and approved by The
Woolmark Company for the washing of Woolmark garments labelled as “machine
wash” provided that the garments are washed according to the instructions on the
garment label and those issued by the manufacturer of this washing machine.
Colour
Separate coloured and white items. Wash new coloured articles separately.
Loading
Wash items of different sizes in the same load to improve washing efficiency and
distribution in the drum.
Delicates
Wash small items (e.g. nylon stockings, belts etc.) and items with hooks (e.g. bras)
in a cloth bag or pillow case with zip. Always remove curtain rings or wash curtains
with the rings inside a cotton bag.
To remove any residual water used during testing by the manufacturer, we
recommend that you carry out a short wash cycle without laundry.
1 Open the tap.
2 Close the door.
3 Pour a little detergent (about 30 ml) into the main wash chamber of the deter-
gent dispenser .
4. Select and start a short programme (see separate “quick reference guide”).
BEFORE THE FIRST WASH CYCLE
PREPARATION OF THE WASHING
DESCRIPTION OF THE WASHING MACHINE
1
2
4
5
6
7
3
If the product you bought has no special procedure for washing waterproof clothes such
as down coat, raincoat, bicycle cover, ski pants or waterproof cover, please do not wash
these articles or spin-dry them.
Never open the door forcibly while the machine is running,otherwise you can
damage the door lock.
After the procedure ends, nixie tube displays the “END”, and the door lock icon goes out.
At this time, the door can be opened.
If the door needs to be opened, press “Start/Pause” button, and if the door lock icon
flickers, it shows that the unlocking condition is met; in 2 minutes, the door lock icon goes
out, and at this time, the door can be opened; if the door lock icon does not flicker, it shows
that the unlocking condition is not met; under such situation, if the door needs to be opened,
keep pressing “ Power ” button for 2 seconds, to restart the washing machine; select
“Spin” procedure, and set the spin speed as “0”. After the procedure operation
ends, door locking icon goes out, and at this time, the door can be opened.

7 8
/ soak
.
U
quick reference guide
2. Empty all pockets
Coins, safety pins etc. can damage your laundry as well as the appliance drum and
tub.
3. Fasteners
Close zips and fasten buttons or hooks; loose belts or ribbons should be tied
together.
4. Stain removal
Blood, milk, eggs etc. are generally removed by the automatic enzyme phase of the
programme.
6.
5.

9 10
Depending on the model, remove the plinth
by holding it tightly on both sides, pushing it
downward and tilting it to the front. Or, push
down on the tabs provided on both the sides
and remove it.
unds
+

11 12
fit
fit

13 14
The appliance stops during the programme.
Check whether:
The“ Rinse Hold” indicator lamp lights up; terminate this option by pressing
.
.
the Start/Pause” button,then start the drain process.
“
The door has been opened and the “ Start/Pause ”button not be pressed.
Close the door and press the
“Start/Pause” button again.
.
Check if there is too much foam inside, machine enters kill-foam routine.
.
The washing machine’s safety system has been actived(see“Fault
.
description table”).
If you wish to connect hot and cold water supply (Fig.1):
1. Fix the red marked inlet hose to the hot water tap and to the inlet valve with
the red filter on the rear side of machine.
2. Fix the other inlet hose to the cold water tap and to the inlet valve with the
blue filter on the rear side of the machine.
Make sure:
a) The connections are tightly fixed
b) Do not invert their position (for example: cold fill into hot inlet valve and vice
If you wish to connect only the cold fill follow the below instructions (Fig. 2):
1. You will need a Y-piece connector. This can be purchased from local
hardware or plumbing supplier.
2. Fix the Y-piece connector to the cold fill tap.
3. Connect the two inlet valves present on the rear part of the machine
to the Y-piece connector using the hoses provided.
Ensure that:
All connections are tightly fixed.
Hot / Cold fill fault - For Models with Dual Inlets
versa).
remove some
solv
.
The door is properly closed (child safety).
The
“Start /Pause” button has been pressed.
The machine will run again automatically after a period.

15 16
If a failure code “F13” appears on the display:
Check whether the door is closed or not and press the “start/pause”button;
if the fault persists, unplug the appliance and contact After-Sales Service
(see “After-Sales Service”).
.
If a failure code “UNB”appears on the display:
Switch the appliance off by pressing the “ Power button 2s and rearrange”
the clothes, then select the spin programme and start; if the fault persists,
unplug the appliance and contact After-Sales Service(see “After-Sales Service ).”
.
Fault description table
Digital display
(if fitted on your machine)
Fault description
“Water supply fault”
“F03” “Draining fault”
“F04” “F05”
“Electrical module”
“F13” “Door lock fault”
“F06” “F07”
“UNB” “Unblance”
Error code
The appliance stops during the programme.
For models with a remaining time display, a failure code between “F01” to “F07” and
“F13”or “UNB”appears on the display.
“F01” “F02”
If a failure code between“F04”to “F07”appears on the display:
Switch the appliance off by pressing the “ Power button 2s and select the”
desired programme; if the fault persists,unplug the appliance and contact
After-Sales Service(see “After-Sales Service ).”
.
Fig.1
Hot fill
Red inlet valve
Blue inlet valve
Cold fill
Red inlet valve
Blue inlet valve
Cold fill
Y-piece
Fig.2
Do not allow children to operate, crawl on, be near or inside your washer.
Note that during the wash cycles, the surface temperature of the porthole
door may increase.
Close supervision of children is necessary when the appliance is used near
children.
If a failure code "F03" appears on the display:
being
Ensure that
if the fault persists, unplug the appliance and
contact After-Sales Service(see “After-Sales Service ).”
press the “start/pause button to cancel the failure code and start”
the programme;if the fault persists,unplug the appliance and contact
After-Sales Service(see After-Sales Service ).“ ”
.
If a failure code “F02” appears on the display:
If a failure code “F01” appears on the display:
if the fault persists,unplug the appliance and contact
After-Sales Service(see After-Sales Service ).“ ”
;

17
adequate for the machine’s 10A Current Rating.
The electrical power cable must be replaced exclusively by a licensed electrician.
AFTER-SALES SERVICE
TRANSPORT/HANDLING
ELECTICAL CONNECTION