Hisense WFKV9014T Mounting instructions

使用说明书
80g双胶纸
英-长兴KV系列
X08060433
X08060433
版本号
设计
审 核
工 艺
标准化
更改单编号
会签
会签
批准
图形识别符号
重 量 比 例
第 张 共 张
A
后附图纸11页
技术要求
1.印刷为黑白色单色，正反面印刷；
2.所有印刷内容正确、清晰，不得有漏印、误印，无印刷缺陷；
3.幅面：（210±3）X（145±3），（单位：mm）；
4.未注公差按照GB/T 1804-m；
5.颜色及整体效果必须经过研发部确认后方能生产，产品检验以封样件为准；
6.符合RoHS现行标准要求和REACH指令。
2012450
黄磊 2018.12.17
崔维明 2018.12.17
张梅娥 2018.12.17
程木聪 2018.12.17 石伟泽 2018.12.17
刘大燕
2018.12.17

LAUNAM
NOITAREPO S’RESU
,ylhguo
roht launam siht daer esaelp ,tinu siht gnitarepo erofeB
ecnerefer erutuf rof niater dna
X08060287
X08060433A

INSTRUCTIONS FOR USE
SAFETY INFORMATION
BEFORE USING THE WASHING MACHINE
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
DESCRIPTION OF THE WASHING MACHINE
OPENING I CLOSING DOOR
CHILD SAFE (IF AVAILABLE)
BEFORE THE FIRST WASH CYCLE
PREPARATION OF THE WASHING
DETERGENTS AND ADDITIVES
REMOVING THE FILTER
DRAINING RESIDUAL WATER
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTERALES SERVICE
TRANSPORT/HANDLING
ELECTRICAL CONNECTION

1
The manufacturer reserves the right for any modifications
on the product which might be deemed necessary or
useful without informing about it in this IFU.
Before operating your new washing machine, please read
this instruction carefully, and keep it for future reference. If
you have lost it accidentally, ask customer service for e-
copy or hard copy.
Please make sure the socket is grounded securely, the
water source connection is reliable.
4. This appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
5. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
6. Children should be supervised to ensure that they do not
play with the appliance.
7. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
8. The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
SAFETY INFORMATION
1.
2.
3.

32
ensure
Ensure
Single inlet -
Dual inlet - and cold
only
Ensure that the ventilation openings in the base of the washing machine
(if available on your model) are not obstructed by a carpet or other material.
9.
10.
For appliances with ventilation openings in the base, that a
carpet must not obstruct the openings.
Children of less than 3 years should be kept away unless
continuously supervised.
The maximum permissible inlet water pressure, 1 MPa, for
appliances intended to be connected to the water mains.
The minimum permissible inlet water pressure, 0.1 MPa, if
this is necessary for the correct operation of the appliance.
The maximum washing capacity is 9kg.
For private domestic use only.
This appliance is intended to be used in household and
similar applications such as:
− staff kitchen areas in shops, offices and other working
environments;
− farm houses;
− by clients in hotels, motels and other residential type
environments;
− bed and breakfast type environments;
− areas for communal use in blocks of flats or in
launderettes.
11.
12.
13.
14.

45
that
the
ing
en
the
from the mains supply,
,
The symbol on the product, or on the documents accompanying the product,
indicates that this appliance may not be treated as household waste. Instead it
shall be handed over to the applicable collection point for there cyclingof electrical
and electronic equipment. Disposal must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed information about
treatment, recovery and recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased
the product.
that

Control panel layout and
appearance will depend on the model.
67
Clean the outside of the washing machine with a damp cloth. Do not use abrasive
detergents.
Never open the door forcibly or use it as a step.
1. Sort the laundry according to...
Type of fabric / care label symbol
Cottons, mixed fibres, easy care/synthetics, wool, handwash items.
The wool wash cycle of this machine has been tested and approved by The
Woolmark Company for the washing of Woolmark garments labelled as “machine
wash” provided that the garments are washed according to the instructions on the
garment label and those issued by the manufacturer of this washing machine.
Colour
Separate coloured and white items. Wash new coloured articles separately.
Loading
Wash items of different sizes in the same load to improve washing efficiency and
distribution in the drum.
Delicates
Wash small items (e.g. nylon stockings, belts etc.) and items with hooks (e.g. bras)
in a cloth bag or pillow case with zip. Always remove curtain rings or wash curtains
with the rings inside a cotton bag.
2. Empty all pockets
Coins, safety pins etc. can damage your laundry as well as the appliance drum and
tub.
3. Fasteners
Close zips and fasten buttons or hooks; loose belts or ribbons should be tied
together.
Stain removal
Blood, milk, eggs etc. are generally removed by the automatic enzyme phase of the
programme.
To removeanyresidualwater usedduring testing by themanufacturer, we
recommend that you carry out a short wash cycle without laundry.
1 Open the tap.
2 Close the door.
3 Pour a little detergent (about 30 ml) into the main wash chamber of the deter-
gent dispenser .
4. Select and start a short programme (see separate quick reference guide).
BEFORETHE FIRST WASHCYCLE
PREPARATIONOF THE WASHING
DESCRIPTION OF THE WASHINGMACHINE
while the
while the
is
is
can
for
for to be
1
4
2
5
5

89
.
U
/ soak

1011
unds
2 Depending on the model, Insert removal tool like
slotted screwdriver into the small opening of
bottom baffle, press the bottom baffle downward
with much strength and open it. Or, push down on
the tabs provided on both the sides and remove it.

1213
fit
fit

1415
solv
the screen is flashing.
too
remove some
The washing machine will not start, and the screen flashes.
Check if the water tap is closed.
the screen is flashing. Press the
and press the "On/Off" button
to start the machine.

1617
Ensure that
Fault Code List
Displayed on Display Window Fault Description
“F01” Water inflow fault
“F03” Drainage fault
“F04”, “F05”, “F06”, “F07”，“F23” and “F02/F24” Electronic module fault, overflow or too much foam.
“F13” Door lock fault
“F14” Door unlock fault
a. “F01” displayed on screen
The machine is not fed with water or insufficient water. Check:
• Faucet is fully open and has enough water pressure.
• Water inlet pipe is knotted or not.
• Filtering net of water inlet pipe is blocked or not (refer to maintenance and
repair).
• Water pipe is frozen or not.
Press “Start/Pause” key after fault is removed.
If fault occurs again, please contact with after-sale service (refer to after-sale
service.).
b. “F03” displayed on screen
The washer is not emptied. The washer stops the program being executed. Shut
down the machine and disconnect power supply. Check:
• Drain pipe is knotted or not.
• Filter in drain pump is blocked or not (refer to the cleaning of filter in drain pump)
“Unb” Unbalance alarm
Hot / Cold fill fault - For Models with Dual Inlets
If you wish to connect hot and cold water supply (Fig.1):
1. Fix the red marked inlet hose to the hot water tap and to the inlet valve with the red
filter on the rear side of machine.
2. Fix the other inlet hose to the cold water tap and to the inlet valve with the blue filter
on the rear side of the machine.
Make sure:
a) The connections are tightly fixed
b) Do not invert their position (for example: cold fill into hot inlet valve and vice versa).
If you wish to connect only the cold fill follow the below instructions (Fig. 2):
1. You will need a Y-piece connector. This can be purchased from local hardware or plumb
ing supplier.
2. Fix the Y-piece connector to the cold fill tap.
3. Connect the two inlet valves present on the rear part of the machine to the Y-piece
connector using the hoses provided.
Ensure that:
All connections are tightly fixed.
Do not allow children to operate, crawl on, be near or inside your washer.
Note that during the wash cycles, the surface temperature of the porthole door may
increase.
Close supervision of children is necessary when the appliance is used near children.
Fig.1
Hot
fill
Red inlet
valve
Blue inlet
valve
Cold
fill
Red inlet
valve
Blue inlet
valve
Cold
Y- fill
piece
Fig.2
Inlet
valve
Cold
fill
Fig.3
For Models with Single Inlet
Fix the inlet hose to the cold water tap and to the inlet valve on the rear side of the machine
as (Fig. 3).

1819
adequate for the machine’s 10 A Current Rating.
The electrical power cable must be replaced exclusively by a licensed electrician.
C. Fault code
The washer stops when the program is running. The display window
shows fault code “F02/F24”, fault codes from “F04’ to “F07”, “F13”,“F14”,
“F23” or “Unb”.
If fault code “F02/F24” is shown
Water level reaches overflow level.
Remove it by pressing “Start/Pause” key and feed water.
Select and start required program. If fault occurs again, disconnect power supply
and contact with after-sale service.
If fault code “F04” to “F07”, “F23” shown
Electronic module fails.
Press the "On/Off" button for 2 seconds to turn off the machine.
After fault is removed, press “Start/Pause” key. If fault occurs again, disconnect
power supply and contact with after-sale service.
If fault code “F13” is shown
Door lock is abnormal. Start program for 20 sec and unlock the washer door
(PTC) to check whether the door is closed.
Open and close it again.
After fault is removed, press “Start/Pause” button. If fault occurs again,
disconnect power supply and contact with after-sale service.
Action: Press “Start/Pause” button. The washing machine will try to open the
door. The alarm will not be removed until the door is unlocked. Or, Press the "On/
Off" button for 2 seconds to turn off the machine. Choose the desired
programmme to start the machine. The alarm will be removed.
Unbalance alarm.
Press the "On/Off" button for 2 seconds to turn off the machine. Open the door
and re-tidy clothes and then rotate program knob to single dehydration mode.
Spin clothes to dry again.
If fault occurs again, disconnect power supply and contact with after-sale service.
If fault code “F14” is shown
Door open fault..
If fault code “Unb” is shown