Hitachi 32PD5000 User manual

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Plasma Display
October 2003 Digital Media Division
YK No.005E
32PD5000
42PD5000
(PW1)
SERVICE MANUAL
Be sure to read this manual before servicing. To assure safety from re, electric shock, injury, harmful radiation
and materials, various measures are provided in this HITACHI Plasma display.
Be sure to read cautionary items described in the manual to maintain safety before servicing.
Caution
1. Features --------------------------------------------------3
2. Specications--------------------------------------------4
3. Service point ---------------------------------------------5
4. Component names -------------------------------------6
5. New adoption technology-----------------------------7
6. Adjustment --------------------------------------------- 10
7. Troubleshooting--------------------------------------- 28
8. Self diagnosis function ------------------------------ 37
9. Basic circuit diagram--------------------------------- 39
10.Printed wiring board diagram ---------------------- 47
11.Block diagram ----------------------------------------- 53
12.Connection diagram --------------------------------- 55
13.Wiring diagram ---------------------------------------- 56
14.Disassembly diagram-------------------------------- 60
15.Replacement parts list------------------------------- 65
Contents
1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be
taken care sufciently in order not to be injured.
2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become sufciently
cool.
3. Special care shall be taken to the display area in order not to damage its surface.
4. The Panel Module shall not be touched with bare hand to protect its surface from stains.
5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the dis-
play area of the Panel Module but also a serviceman himself.
6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and exible
cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care sufciently
not to break. If you break Chip Tube, the Panel doesn’t display anything forever.
Service Warning

2
32PD5000/42PD5000 (PW1)
3
32PD5000/42PD5000 (PW1)
CAUTION FOR SAFETY
Please read this page before repair the monitor.
This page explains to following items for keep the safety of set and prevent to accident during
repair work.
We explain by symbol at happen the damage or injury when took wrong repair.
Warning This symbol means "possible to die or heavy damage"
Caution This symbol means "possible to damage or something will break"
We made the symbol as below, which are kind of following items.
This symbol means "CAUTION"
This symbol means "POSSIBLE to
ELECTRIC SHOCK"
This symbol means "MUST"
This symbol means "DO NOT"
Should be follows to instructions.
We indicates to cabinet, chassis and parts
by label, which are special attention part.
Please follow to note and [Safety Instructions]
of User’s Manual.
Prevent the electric shock.
Please take care during working because
monitor has high voltage part and power
supply part.
Possible to die if you tough to these place
by miss take.
Please disconnect power plug during
overhaul, reassemble or change parts.
You will die or take damage by electric
shock if you touch to live part.
Use recommended components.
Please use to same characteristic compo-
nent, which is same as previous for your
safety and keep reliability especially marked
by in parts list and circuit diagram.
It is reason of electric shock or fire if you
use non-recommended component.
Should be kept same style of wiring or component.
Monitor uses tubes or tapes, which made
by insulator, and some components are
keep distance from surface of PWB for
safety.
Internal leads kept from hot part or high voltage
part by clamper or styling, so please return to
original condition for prevent to electric shock
or fire.
Should be done safety check after finished.
Every part (removed screws, component
and wiring) should be returned to previous
condition.
Check around repair position for make
damage by miss take and measure the
insulated impedance by meg-ohm meter.
Confirm the value of impedance, that
value is more than 4M ohm.
It is reason for electric shock or fire if that
value is less than 4M ohm.
Nobody can check and repair to the code
and combination circuit of HDCP.
Never remove the shield case, which is
assembled to the code and combination
circuit of HDCP.
WARNING

2
32PD5000/42PD5000 (PW1)
3
32PD5000/42PD5000 (PW1)
PRECAUTIONS
● How to clean the plasma screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard
objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not
enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
● How to clean the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral
detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax,
glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
1. Features
PW1 chassis
This chassis basically constitutes just a MONITOR to use with AVC (Audio Visual Control center). But it can con-
stitute AV MONITOR when applied the VIDEO board, and also a TV when applied the VIDEO board and the
TUNER board.
[Common Features]
● Large-screen, high-definition plasma display panel
The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024(V) pixels, and the 32-inch color plasma
display panel with a resolution of 852(H) X 1024(V) pixels, creates a high-definition, large-screen (aspect ratio : 16:9)
and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power
lines, the panel produces high-quality display images free from color misconvergence and display distortion.
● High Performance Digital Processor
A wide range of personal computer signals can be handled, from 640 x 400, 640 x 480 VGA to 1600 x 1200 UXGA.
● Easy-to-use remote control and on screen display system
The remote control included eases the work of setting display controls. Further, the on-screen display system,
displays the status of signal reception and display control settings in an easy-to-view fashion.
● Power saving system
The International ENERGY STAR power saver feature saves power consumption automatically when input sig-
nals are not available.
When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.
● TruBass
TruBass, SRS and ( ) symbol are trademarks of SRS Labs,Inc.
TruBass technology is incorporated under license from SRS Labs, Inc.
[AVC MONITOR model] 42/32PD5000 VA
● DVI-D terminal and 8pin-DIN terminal for AVC input
(Other terminals, buttons and remote control for use are all with the AVC unit.)
[AV MONITOR model] 42PD5000 MA
● One mini D-sub terminal and one DVI-D terminal for RGB input
The D-sub terminal can also receive the RGB-component by On-Screen Display control.
● One composite/S.video input terminal and two component video input terminals added with VIDEO board
One component input is possible to switch to RGB signal input from the Menu screen.
● One SCART terminal for the signal of the European standard added with VIDEO board
It operates as composite/S.video input and RGB input terminal, or composite video output terminal.
● One composite video output terminal as a monitoring output added with VIDEO board
● Simple type of the remote control
[TV model] 42/32PD5000 TA
● Various input/output terminals added with VIDEO board - same to above-mentioned feature of the AV MONI-
TOR model
● Tuner and TELETEXT receiver added with TUNER board
● High performance type of the remote control

4
32PD5000/42PD5000 (PW1)
5
32PD5000/42PD5000 (PW1)
2. Specifications
Panel
Display
dimensions Approx. 32 inches (716 (H) x 399 (V) mm, diagonal 820mm) Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)
Resolution 852 (H) x 1024 (V) pixels 1024 (H) x 1024 (V) pixels
Net dimensions
(excluding Speakers/Stand) 830 (W) x 506 (H) x 92 (D) mm 1030 (W) x 636 (H) x 91 (D) mm
Net weight
(excluding Speakers/Stand) 24.6kg 34.9kg
Ambient
conditions
Temperature Operating : 5 C to 35 C, Storage : 0 C to 40 C
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply AC100 - 240V, 50/60Hz
Power consumption/at standby 255W / <3W 365W / <3W
Audio output 12W + 12W (6 )
(RGB input) - 42PD5000MA, 32/42PD5000TA (*
Input signals
Input terminals
RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)
Video signals 0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
Sync signals
H/V separate, TTL level [2K ]
H/V composite, TTL level [2K ]
Sync on green, 0.3 Vp-p [75 ]
(Video input) - 42PD5000MA, 32/42PD5000TA (*
Input signals
Input terminals
AV1: composite video input terminal (RCA)
AV1: Y PB PR video input terminal (RCA)
AV1: L/R audio input terminal (RCA)
AV2: composite video input terminal (RCA)
AV2: Y/G PB/B PR/R video input terminal (RCA)
AV2: L/R audio input terminal (RCA)
AV3: composite video input terminal (RCA)
AV3: S video input terminal (RCA)
AV3: L/R audio input terminal (RCA)
AV4: composite video / S video / RGB / L/R audio input terminal (Scart)
Video signals
AV1: PAL, SECAM, NTSC3.58, NTSC4.43
AV1: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
AV2: PAL, SECAM, NTSC3.58, NTSC4.43
AV2: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60, RGB
AV3: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: PAL, SECAM, NTSC3.58, NTSC4.43
AV4: RGB
Video output Signal
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
AV4: composite video / L/R audio output terminal (SCART)
(RF input) - 32/42PD5000TA (*
Input signals
Input terminals ANT : 75 Unbalanced
RF Video System
PAL B, G, H / I / D, K
SECAM B, G / D, K / K1
NTSC-M
*)32/42PD5000VA : Refer to the Service Manual for PD32/42-A3000(No.003E).
Applicable video signals for each input terminal (42PD5000MA, 32/42PD5000TA)
Terminal RCA/SCART DVI D-sub
Signal CVBS S-video Component RGB PC STB RGB Component
AV1
AV2
AV3
AV4
RGB1
RGB2
( :Available)

4
32PD5000/42PD5000 (PW1)
5
32PD5000/42PD5000 (PW1)
3. Service points
Lead free solder
This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions
before attempting any soldering work.
Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free
solder can splatter at high temperatures (600˚C).
Lead free solder indicator
Printed circuit boards using lead free solder are engraved with an "F."
Properties of lead free solder
The melting point of lead free solder is 40-50˚C higher than leaded solder.
Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking
these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
Precautions when using leaded solder
Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead
free solder has been completely melted (do not apply the soldering iron without solder).
Servicing soldering iron
A soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.
Recommended soldering iron:
Soldering iron with temperature control function (temperature range: 320-450˚C)
Recommended temperature range per part:
Part Soldering iron temperature
Mounting (chips) on mounted PCB 320˚C±30˚C
Mounting (chips) on empty PCB 380˚C±30˚C
Chassis, metallic shield, etc. 420˚C±30˚C
FILTER PWB, SW PWB, LED/RECEIVER PWB, TACT SW PWB, SP TERMINAL(L/R) PWB
AUDIO PWB, JOINT PWB
VIDEO PWB (42PD5000MA, 32/42PD5000TA)
TUNER PWB (32/42PD5000TA)
The PWB assembly which has used lead free solder

6
32PD5000/42PD5000 (PW1)
7
32PD5000/42PD5000 (PW1)
4. Component names
[Main unit]
[Remote control]
Remote-control
receiver
SIZE button
( SELECT button)
INPUT SELECT button
(OK button)
RECALL button
( SELECT button)
SUB-POWER button
VOLUME
UP/DOWN
buttons
( ADJUST
buttons)
Main power switch
(42")
(32")
Indicating lamp
MENU button
( ) indicates the function while the MENU is displayed on the screen.
CP-RD4S
(for 42PD5000MA)
CLE-958
(for 32/42PD5000TA)
CLE-951
(for 32/42PD5000VA)
* This unit can also
control 42PD5000MA.
----- packed with
AVC-A3000

6
32PD5000/42PD5000 (PW1)
7
32PD5000/42PD5000 (PW1)
5. New adoption technology
[System control micom I001(M3062)]
Pin function table
No. Pin Name I/O Function
1 OSD_DATA O OSD DATA
2 OSD_CLK O OSD CLOCK
3 AC-CLOCK I AC CLOCK
4 FE.AGC_O O AGC Voltage (F/E)
5 DATA_OUT(FC) O FC DATA
6 DATA_IN(FC) I FC DATA
7 CLK(FC) O FC CLOCK
8 BYTE I GND
9 CNVSS I CNVSS(FLASH)
10 DSUB COMP O SYNC-SW (AV1-4,D-sub_RGB: L, DVI,D-sub_Component: H)
11 RGBSW O SYNC-SW (AV1-4,D-sub_Component: L, DVI,D-sub_RGB: H)
12 RESET I RESET
13 XOUT O 16MHz OSC.OUT
14 VSS I GND
15 XIN I 16MHz OSC.IN
16 VCC1 I 5V
17 NMI I 5V Pull-up
18 RMCON I IR Signal
19 V.FREQ_2 I SYNC for V.Frequency Detection (Sub Picture)
20 V.FREQ_1 I SYNC for V.Frequency Detection (Main Picture)
21 SCV.SYNC I CVBS for SYNC Detection (Sub Picture)
22 IRQ I PANEL MODULE Condition (L: Normal, H: Error)
23 MCV.SYNC I CVBS for SYNC Detection (Main Picture)
24 LED_GREEN O L: LED ON (PowerON/PowerSave), H: LED OFF (Standby)
25 H.FREQ_2 I SYNC for H.Frequency Detection (Sub Picture)
26 RESERVE - NC
27 H.FREQ_1 I SYNC for H.Frequency Detection (Main Picture)
28 PDWN O RESERVE (LVDS POWER DOWN MODE (Panel)) : Always High
29 SCL1 O IIC-BUS CONTROL CLOCK (TUNER PWB)
30 SDA1 I/O IIC-BUS CONTROL DATA (TUNER PWB)
31 TXD1 O DATA (RS-232C)
32 RXD1 I DATA (RS-232C)
33 SCLK I CLOCK (FLASH MEMORY Writing)
34 BUSY O BUSY (FLASH MEMORY Writing)
35 TXD2 O RESERVE
36 RXD2 I RESERVE
37 SDA4 I/O IIC-BUS CONTROL DATA (PDP PANEL)
38 SCL4 I/O IIC-BUS CONTROL CLOCK (PDP PANEL)
39 PDPGO O PANEL MODULE Start (L: STANDBY, H: ON)
40 CPUGO O MPU Recoverly of PANEL MODULE
41 EPM I EPM (FLASH MEMORY Writing)
42 VIDEO.DET_1 I Detecting VIDEO PWB (L: 8pin_PWB, H: No PWB/VIDEO PWB)
43 VIDEO.DET_2 I Detecting VIDEO PWB (L: 8pin_PWB/VIDEO PWB, H: No PWB)
44 TUNER.DET_1 I Detecting TUNER PWB (L: ASIA, H: EURO/No PWB)
45 TUNER.DET_2 I Detecting TUNER PWB (L: ASIA/EURO, H: No PWB)
46 CE I CE (FLASH MEMORY Writing)
47 AV LINK I AV LINK Scart Connector
48 INITIALIZE I Initializing EEPROM (L: INIT, H: Normal)
49 D.RESET O RESET (DVI)
50 DVI-PD O DVI Control (PowerOFF,PowerSave(except DVI): L, PowerON,PowerSave(DVI): H)

8
32PD5000/42PD5000 (PW1)
9
32PD5000/42PD5000 (PW1)
No. Pin Name I/O Function
51 SCDT I RESERVE : Always High-Impedance
52 HS-DJTR O Jitter Control (DVI) : Always Low
53 AUD RST O RESET for LIPSYNC IC
54 AUD DET I Detecting Connection of LIPSYNC IC (L: Yes, H: No)
55 SPRLY O SPEAKER ON/OFF Relay Control (L: ON(MUTE-OFF), H: OFF(MUTE-ON))
56 MUTE O AUDIO MUTE (L: MUTE-OFF, H: MUTE-ON)
57 ASEL1 O AUDIO Signal SW (D-sub,AVC: L, VIDEO,DVI: H)
58 ASEL2 O AUDIO Signal SW (VIDEO,AVC: L, DVI,D-sub: H)
59 SDA2 I/O IIC-BUS CONTROL DATA (Sync-Sep., Audio Processor etc.)
60 SCL2 O IIC-BUS CONTROL CLOCK (Sync-Sep., Audio Processor etc.)
61 D-SUB COMP_SYNC.SW O SYNC-SW (D-sub_Component: H, Others: L)
62 VCC2 I 5V
63 DSUB_DET1 I RGB1-DET
64 VSS I GND
65 TRAP-MAIN O L: TRAP OFF (1080i,720p), H: TRAP ON (576i/p,480i/p)
66 RESERVE - NC
67 DVI.SW O L: Analog, H: Digital (DVI)
68 WSS I STATUS(WSS) of SCART INPUT (AV4) (L: No Signal, M: 4:3, H: 16:9)
69 TV-AFC I AFC Voltage (F/E)
70 FE.AGC_I I AGC Voltage (F/E)
71 RESERVE - NC
72 FE.MUTE - NC
73 FE.ST - NC
74 FE..SAP - NC
75 FE.MONO - NC
76 FE.MODE - NC
77 RESERVE - NC
78 RESERVE - NC
79 SCL0 O IIC-BUS CONTROL CLOCK (VIDEO PWB)
80 SDA0 I/O IIC-BUS CONTROL DATA (VIDEO PWB)
81 SCL3 O IIC-BUS CONTROL CLOCK (EEPROM)
82 SDA3 I/O IIC-BUS CONTROL DATA (EEPROM)
83 MSP.STATUS I MPX STATUS (L: Fixed, H: Changed)
84 MSP.RESET O RESET (MPX)
85 OSD_CS O OSD CHIP SELECT
86 FC_ENABLE O FC ENABLE
87 PARITY.SW O L: FC4, H: AVC
88 AVC1 I Detecting AVC Connection/Power (No Power or Without 24pin Cable : L, Others : H)
89 TEXT-RESET O RESET (T/TEXT)
90 AD_KEY3 I AD KEY3: POWER
91 AD_KEY2 I AD KEY2: PR UP/DWN, VOL UP/DWN, MENU
92 AD_KEY1 I AD KEY1: INPUT
93 TV_POWER O POWER ON/OFF (L: STANDBY, H: ON/PowerSave)
94 DIP.DET I L: Normal(No DIP), H: Abnormal(Detect DIP)
95 LED_RED O L: LED ON (Standby/PowerSave), H: LED OFF (PowerON)
96 AVSS I GND
97 FAN_ALARM I L: Normal, H: Abnormal
98 VREF I 5V
99 AVCC I 5V
100 AVC2 I Detecting AVC Connection/Power (No Power or Without 8pin Cable : L, Others : H)

8
32PD5000/42PD5000 (PW1)
9
32PD5000/42PD5000 (PW1)
*1󳊛for ASIA F/E
µ-COMPUTER *2󳊛for US/CANADA F/E
(M30625) *3󳊛for europe F/E
*4󳊛for ASIA
AC-CLOCK TB4IN P54 VIDEO.DET_1 *5󳊛for EUROPE
DSUB COMP P87 P53 VIDEO.DET_2 *6󳊛Reserve
RGB SW P86 P52 TUNER.DET_1
POWER_SAVE P101 P51 TUNER.DET_2
POWER_LED P76 P47 AV LINK TV.POWER P103 D.RESET
(
DARST
)
P45 P46 INITIALIZ
E
DVI-PD P44 EEPROM
SCDT P43 P97 AVC-2 (CAT24WC32)
HS-DJTR P42 DVI-SW P25 P07 SCL3 TRAP-MAIN P27 P06 SDA3
RGB1_DET P30 󳆝A0/A1h󳆞
AUD RST P41 AUD DET P40 P32
SPRLY P37 P33 MUTE P36 P71 ASEL1 P35 P70 ASEL2 P34 P11 PDWN P72 P10
PARITY.SW P01
V
IDEO DECODER TUNER (FE) AUDIO PROCESSOR
IRQ(PM-IRQ) P80 CCD(SUB
)
(TB1274) (ENG39616G󳆎*1/V0-A31FTV *2/ENG295**G *3) (NJW1136)
(Z86229) SCL0 SCL1 SCL2 AUX0 TRUBASS SW SCL0 SDA0 SDA1 SDA2
PDPGO(PM_ON) P57 SDA0 *3󳆝84/85h󳆞AUX1 TRUBASS SW
CPUGO(PM_CPU) P56 󳆝8E/8Fh󳆞 󳆝C0h󳆞 󳆝82h󳆞
RMCON(AVC) INT2 󳆝28/29h󳆞
V.FREQ_2(VIDEO) INT1 FC4 Sub µ-COM 3L Y/C MPX LIP_SYNC
V.FREQ_1 INT0 (H8S_2238 ) (TC90A69F) (MSP3415G *5󳊐MSP3455G *4) (NJU26103)
AVC_1 P00 CLK3 CLOCK AV SW (Front Stage) SCL0 SCL0 SCL2
SCV.SYNC TA4IN SOUT3 DATA (CXA2069Q) SDA0 SDA0 SDA2
MCV.SYNC TA3IN P02 ENABLE SCL0 S-1
AD_KEY3 AN6 SDA0 S-2 S_DET_AV3 󳆝B2h󳆞 󳆝3Ah󳆞
AD_KEY2 AN5 S-3 COMP_DET_AV2 RESET MSP_RESET
FE.AGC_I AN22 OSD CONTROLER S-4 COMP_DET_AV1 Sync Separator 󳆝80/81h󳆞Sync Separator
FE.AGC_O P21 (OSDCM201 ) S2-2 (TA1370FG) (TA1370FG)
TV.AFC AN23 CLK4 SCLK S2-3 SCL0 SCL2
WSS AN24 SOUT4 SIN S2-3 SDA0 SDA2
AD_KEY1 AN4 P03 CS S2-4 CCD(MAIN)
RESET RESET 󳆝90/91h󳆞 󳆝D8/D9h󳆞(Z86229) 󳆝DC/DDh󳆞
H.FREQ_2(VIDEO) TA2IN SCL1
H.FREQ_1 TA1IN AV SW (Rear Stage) Thermal Sensor *6 SDA1
(NJM1320) (AD7414󳊊
FAN_ALARM P100 SCL0 TOF.SW SCL2 󳆝28/29h󳆞
(STATUS_DET *10) P05 SDA0 SCCD.SW SDA2
MSP_RESET P04
V
IDEO DECODER (SUB
)
󳆝96/97h󳆞 󳆝94/95h󳆞(TB1274)
DIP_DET P102 SCL1 TXD2(PDP) TXD0 SDA1
RXD2(PDP) RXD0 3D Y/C (MAIN) PANEL D-SUB COMPONENT. P31 (UPD64084) 󳆝8A/8Bh󳆞
SW P60 SCL0 SCL4
P61 SDA0 TELETEXT SDA4
(SAA5264󳊊
󳆝B8/B9h󳆞SCL1 TV.SEL_1 󳆝30/31h󳆞
P65 SCLK
(
FLASH
)
SDA1 TV.SEL_2
FE.MODE P14 P64 BUSY(FLASH)
FE.MONO P15 TXD1 RS232C/FLASH_TXD 󳆝60/61h󳆞
FE.SAP P16 RXD1 RS232C/FLASH_RXD
FE.ST P17 CNVss CE EPM CNVss FE.SW_1
FE.MUTE P20 CE CE Normal 0V 5V 0V FE.SW_2
TEXT_RESET P107 EPM EPM Writing 5V 0V 5V
P51 P52
0 0 0 1 1 0
11 NO TUNER
US/CANADA
EUROPE
Reserve
VIDEO PWB
ASIA
TUNER TYPE P53 P54 VIDEO TYPE
0 0
0 1 1 NO VIDEO/RGB PWB
1
RGB PWB1 0
B
u
ff
er
B
u
ff
er
Level Shift
Level Shift
Block diagram

10
32PD5000/42PD5000 (PW1)
11
32PD5000/42PD5000 (PW1)
6. Adjustment
● How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
● Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel
may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
, buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to
normal condition.
● Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.704) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.374 and change data value from 1 to 0.
(5) Check that the receiving channel goes to AV1. Unit is set to preset values.

10
32PD5000/42PD5000 (PW1)
11
32PD5000/42PD5000 (PW1)
Service adjustment items by I2C-bus control
(except 32/42PD5000VA(*)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42"
FORMATTER
PWB
VIDEO
PWB
TUNER
PWB
PDP
Panel
0 R DRIVE1 [TV/VIDEO/DSUB-COMP] COOL 255 255 255
1 G DRIVE1 [TV/VIDEO/DSUB-COMP] COOL 255 255 255
2 B DRIVE1 [TV/VIDEO/DSUB-COMP] COOL 255 255 255
3 R DRIVE2 [TV/VIDEO/DSUB-COMP] NORMAL 255 255 255
4 G DRIVE2 [TV/VIDEO/DSUB-COMP] NORMAL 255 255 255
5 B DRIVE2 [TV/VIDEO/DSUB-COMP] NORMAL 255 255 255
6 R DRIVE3 [TV/VIDEO/DSUB-COMP] WARM 255 255 255
7 G DRIVE3 [TV/VIDEO/DSUB-COMP] WARM 255 255 255
8 B DRIVE3 [TV/VIDEO/DSUB-COMP] WARM 255 255 255
9 R DRIVE4 [TV/VIDEO/DSUB-COMP] BLACK & WHITE 255 255 255
10 G DRIVE4 [TV/VIDEO/DSUB-COMP] BLACK & WHITE 255 255 255
11 B DRIVE4 [TV/VIDEO/DSUB-COMP] BLACK & WHITE 255 255 255
12 R DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255 255
13 G DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255 255
14 B DRIVE1 [DVI-PC/DVI-STB/DSUB-RGB] COOL 255 255 255
15 R DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 255 255
16 G DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 255 255
17 B DRIVE2 [DVI-PC/DVI-STB/DSUB-RGB] NORMAL 255 255 255
18 R DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 255 255
19 G DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 255 255
20 B DRIVE3 [DVI-PC/DVI-STB/DSUB-RGB] WARM 255 255 255
21 R DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 255 255
22 G DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 255 255
23 B DRIVE4 [DVI-PC/DVI-STB/DSUB-RGB] BLACK & WHITE 255 255 255
24 Black Level(RGB_AMP) TV/VIDEO 254 127 127
25 Black Level(RGB_AMP) PC 254 127 127
26 Reference Amplitude(RGB_AMP) TV/VIDEO 254 127 127
27 Reference Amplitude(RGB_AMP) PC 254 127 127
28 Display for Max. Amplitude Level Main - - -
29 Display for Max. Amplitude Level SUB - - -
30 SUB_CONTRAST (RF) MAIN 15 8 8
31 SUB_CONTRAST (AV1) MAIN/SUB COMPOSITE mode 15 7 7
32 SUB_CONTRAST (RF) SUB 15 8 8
33 SUB_CONTRAST (AV4) MAIN/SUB COMPOSITE mode 15 7 7
34 SUB_COLOR (VIDEO-PAL/SECAM) MAIN 15 6 6
35 SUB_COLOR (RF-PAL/SECAM) MAIN 15 8 8
36 SUB_COLOR (VIDEO-NTSC) MAIN 15 8 8
37 SUB_COLOR (RF-NTSC) MAIN 15 6 6
38 SUB_COLOR (VIDEO-PAL/SECAM) SUB 15 8 8
39 SUB_COLOR (RF-PAL/SECAM) SUB 15 8 8
40 SUB_COLOR (VIDEO-NTSC) SUB 15 8 8
41 SUB_COLOR (RF-NTSC) SUB 15 8 8
42 TINT (VIDEO) MAIN 63 33 33
43 TINT (RF) MAIN 63 33 33
44 TINT (VIDEO) SUB 63 33 33
45 TINT (RF) SUB 63 33 33
46 S_B-Y_ADJ MAIN 15 8 8
47 S_R-Y_ADJ MAIN 15 8 8
48 S_B-Y_ADJ SUB 15 8 8
49 S_R-Y_ADJ SUB 15 8 8
50 BPF_Q (4.43MHz) MAIN 3 3 3
51 BPF_f0 (4.43MHz) MAIN 3 1 1
52 Y_DL (4.5MHz) MAIN 10 5 5
53 Y_DL (5.5MHz PAL/NTSC4.43) MAIN 10 3 3
54 Y_DL (5.5MHz SECAM) MAIN 10 0 0
55 Y_DL (6.0PAL/NTSC4.43) MAIN 10 9 9
56 Y_DL (6.0SECAM) MAIN 10 9 9
57 Y_DL (VIDEO PAL/NTSC4.43) MAIN 10 6 6
58 Y_DL (VIDEO SECAM) MAIN 10 8 8
59 Y_DL (VIDEO NTSC) MAIN 10 6 6
60 BELL_f0 MAIN 1 0 0
61 Y_OUT_LEVEL (VIDEO) MAIN 63 13 13
62 Free
63 Y_OUT_LEVEL (TEXT) MAIN 63 0 0
64 C_OUT_LEVEL (VIDEO) MAIN 63 7 7
65 Free
66 C_OUT_LEVEL (TEXT) MAIN 63 0 0
67 Y_OUT_LEVEL (TEXT) SUB 63 12 12
68 Y_OUT_LEVEL (VIDEO) SUB 63 13 13
69 Free
70 C_OUT_LEVEL (TEXT) SUB 63 7 7
71 C_OUT_LEVEL (VIDEO) SUB 63 7 7
72 Free
73 BPF_Q (4.43MHz) SUB 3 3 3
74 BPF_f0 (4.43MHz) SUB 3 1 1
75 Y_DL (4.5MHz) SUB 10 5 5
76 Y_DL (5.5MHz PAL/NTSC4.43) SUB 10 2 2
77 Y_DL (5.5MHz SECAM) SUB 10 0 0
78 Y_DL (6.0PAL/NTSC4.43) SUB 10 7 7
79 Y_DL (6.0SECAM) SUB 10 10 10
80 Y_DL (VIDEO PAL/NTSC4.43) SUB 10 8 8
81 Y_DL (VIDEO SECAM) SUB 10 6 6
82 Y_DL (VIDEO NTSC) SUB 10 5 5
83 BELL_f0 SUB 1 0 0
84 C_TRAP_SW (COMB=OFF-PAL/NTSC4.43/NTSC3.58) MAIN 1 0 0
85 C_TRAP_SW (COMB=OFF-PAL/NTSC4.43/NTSC3.58) SUB 1
1
0 0
86 MVM (VIDEO) - 0 0
87 AFC_GAIN (AV00) - 3 0 0
88 AFC_GAIN (AV1) - 3 0 0
Default Changed Component
For Asia
For Asia
For Asia
For Asia
For Asia
For Asia
For Asia
For Asia
For Asia
For Asia
ADJ.
No.
* 32/42PD5000VA : Refer to the Service Manual for PD32/42-A3000(No.003E).

12
32PD5000/42PD5000 (PW1)
13
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
89 AFC_GAIN (AV2) - 3 0 0
90 AFC_GAIN (AV3) - 3 0 0
91 AFC_GAIN (AV4) - 3 0 0
92 S_INHBT - 1
1
0 0
93 S_ID - 0 0
94 S_GP - 3 0 0
95 S_V_ID - 1 0 0
96 BELL/HPF - 3 3 3
97 Cb offset1 MAIN 15 8 8
98 Cr offset1 MAIN 15 8 8
99 Cb offset1 SUB 15 8 8
100 Cr offset1 SUB 15 8 8
101 Sharpness Gain(VIDEO) PAL MAIN 15 8 8
102 Sharpness Gain(RF) MAIN 15 8 8
103 Sharpness EQ(4.5MHz) MAIN 3 1 1
104 Sharpness EQ(5.5MHz) MAIN 3 1 1
105 Sharpness EQ(6.0/6.5MHz) MAIN 3 1 1
106 Sharpness EQ(VIDEO) MAIN 3 1 1
107 Sharpness f0(VIDEO) PAL MAIN 3 2 2
108 Sharpness f0(RF) MAIN 3 2 2
109 Sharpness Gain(VIDEO) PAL SUB 15 9 9
110 Sharpness Gain(RF) SUB 15 10 10
111 Sharpness EQ(4.5MHz) SUB 3 1 1
112 Sharpness EQ(5.5MHz) SUB 3 1 1
113 Sharpness EQ(6.0/6.5MHz) SUB 3 1 1
114 Sharpness EQ(VIDEO) SUB 3 1 1
115 Sharpness f0(VIDEO) PAL SUB 3 2 2
116 Sharpness f0(RF) SUB 3 2 2
117 LPF MAIN 1 0 0
118 LPF SUB 1 0 0
119 SECAM D-Trap MAIN/SUB 1 1 1
120 FILTER SW(RF) MAIN 1 0 0
121 FILTER SW(RF) SUB 1 0 0
122 NTSC Comb(Comb off) SUB 1 1 1
123 HS Phase MAIN 1 0 0
124 HS Phase SUB 1 0 0
125 P/N ID MAIN 1 0 0
126 P/N ID SUB 1
1
0 0
127 Y/C_SEP_MODE (COMB=OFF-PAL) - 3 0 0
128 Y-Pf0- 0 0
129 Y-EQ_GAIN - 3 2 2
130 Y-EQ/N.C_LIM - 3 0 0
131 Y-LPF - 1 0 0
132 V-EMPH_GAIN - 7 1 1
133 V-EMPH_N.L - 7 3 3
134 V-EMPH_CORE - 3 3 3
135 D RANGE - 1 0 0
136 DY_GAIN MAIN NTSC mode 15 9 9
137 DC_GAIN MAIN NTSC mode 15 6 6
138 VAP_GAIN MAIN NTSC mode 7 2 2
139 VAP_INV MAIN NTSC mode 31 10 10
140 YH_CORE MAIN NTSC mode 3 0 0
141 YHCGAIN MAIN NTSC mode 1 1 1
142 CDL MAIN NTSC mode 7 3 3
143 YNRK MAIN NTSC mode 1 1 1
144 YNRINV MAIN NTSC mode 1 0 0
145 YNRLIM MAIN NTSC mode 3 1 1
146 CNRK 1 1 1
147 CNRINV 1 0 0
148 CNRLIM 3 1 1
149 YPFG 15 10 10
150 SEPA_LEVEL 480i/576i 3 2 2
151 SEPA_LEVEL 480p/576p 3 2 2
152 SEPA_LEVEL 1080i_50 3 2 2
153 SEPA_LEVEL 1080i_60/720p 3 2 2
154 AUTO_FM/AM(D11-D8) - 15 2 2
155 AUTO_FM/AM(D7-D0) - 254 189 189
156 A2_THRESHOLD(D11-D8) - 15 0 0
157 A2_THRESHOLD(D7-D0) - 254 112 112
158 PRE_AM except 4.5MHz(except BIL/STE) 254 17 17
159 VOL_SCART1 (D15-D8) - 254 115 115
160 VOL_SCART1 (D7-D5) - 7 0 0
161 PRE_SCART - 254 31 31
162 PRE_FM 4.5MHz(JAPAN) 254 34 34
163 PRE_FM 4.5MHz(except BTSC-SAP) 254 32 32
164 PRE_FM 4.5MHz(BTSC-SAP) 254 60 60
165 PRE_FM 4.5MHz(KOREA-except BIL/STE) 254 19 19
166 PRE_FM 4.5MHz(KOREA-BIL/STE) 254 34 34
167 PRE_FM except 4.5MHz(except BIL/STE) 254 17 17
168 PRE_FM except 4.5MHz(BIL/STE) 254 27 27
169 PRE_NICAM - 254 57 57
170 Screen Saver -Picture shift amount 0:1pixel 1:2pixels 2:3pixels 2 0 0
171 Thermal Sensor available 0:NO 1:YES 1 0 0
172 Video Input Function available 0:NO 1:YES 1 1 1
173 Screen Saver -Picture Shift direction 0:dia 1:cross 2:up/down 3:left/right 3 0 0
174 AUDIO Function available 0 :NO, 1 :YES 1 1 1
175 Remouto Function available 0:NO, 1 :YES 1 1 1
176 Power Save On/Off Setting at Initialize,Reset and Shipping 0:Change 1: Don't Change 1 0 0
177 DVI-STB/RGB-COMPONENT Function available 0 :NO, 1 :YES 1 0 0
Default Changed Component
ADJ.
No.
FORMATTER
PWB

12
32PD5000/42PD5000 (PW1)
13
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
178 Free
179 Free
180 Terminal Mode Function available 0:Not Available, 1:Available RS232C 1 0 0
181 Free
182 AGC_LEVEL AGCL ALL Mode 3 0 0
183 TEXT H sync delay - 127 0 0
184 TEXT V sync delay - 127 50 50
185 TEXT_H_POSITION - 254 42 42
186 TEXT_V_POSITION - 254 38 38
187 Lower Limits value for Sync Detect of 2ms interval For AFC at TV mode 254 25 25
188 Upper Limits Value for Sync Detect of 2ms interval For AFC at TV mode 254 40 40
189 Lower Limits value for Sync Detect of 2ms interval For Free Running at TV mode 254 30 30
190 Upper Limits Value for Sync Detect of 2ms interval For Free Running at TV mode 254 45 45
191 Lower Limits value for Sync Detect of 2ms interval For AUTO OFF at TV mode 254 25 25
192 Upper Limits Value for Sync Detect of 2ms interval For AUTO OFF at TV mode 254 35 35
193 Lower Limits value for Sync Detect of 2ms interval For Free Running at AV mode 254 30 30
194 Upper Limits Value for Sync Detect of 2ms interval For Free Running at AV mode 254 45 45
195 Counting time for discrimination of fV (TB1274) - 31 2 2
196 Free 1 0 0
197 Counting time for discrimination of Sync. (M30625/TA1370) - 31 2 2
198 Input Source of fV/fH judgment (0:M30625,1:TA1370) Component Mode 1 0 0
199 Counting time for discrimination of fV (M30625/TA1370) - 31 2 2
200 Y_DL (6.5MHz PAL/NTSC4.43) Main 10 7 7
201 Y_DL (6.5MHz SECAM) Main 10 10 10
202 Y_DL (6.5MHz PAL/NTSC4.43) Sub 10 4 4
203 Y_DL (6.5MHz SECAM) Sub 10 10 10
204 PDP-BLK ON/OFF 1:ON, 0:OFF 1 0 0
205 Counting time for discrimination of fH (M30625/TA1370) - 31 2 2
206 Sharpness f0(L) Sub 3 2 2
207 NJW1320_OUT1_GAIN VIDEO PWB 1 0 0
208 NJW1320_OUT2_GAIN VIDEO PWB 1 0 0
209 Sharpness f0(L') Sub 3 2 2
210 AFC_GAIN (Except AV00 mode) Except AV00 mode 3 0 0
211 Timer Correction (for error of ceramic-filter osc.freq.) 62 34 34
212 Brightness Center (CM)
NT2/NT3/HD2/HD3/PAL2/PAL3/HD9/HD10/NT4/PAL4
254 128 128
213 Brightness Center (CM) HD1/HD4/HD5/HD6/HD7/HD8 254 124 124
214 Brightness Center (CM) MULTI PICTURE/NT1/PAL1 254 128 128
215 Free
216 Contrast Center (CM) TV/VIDEO(AV1/AV4 mode) 254 137 137
217 Free
218 Color Center (CM) NT1/NT2/NT4/HD3/HD4/HD6/PAL4 127 80 80
219 Color Center (CM) PAL1/PAL2/HD8/HD9 127 80 80
220 Color Center (CM) NT3/HD1/HD2/HD5/PAL3/HD7/HD10 127 80 80
221 Tint Center (CM) PAL1 254 118 118
222 Tint Center (CM) NT1/NT2/NT4/HD3/HD4/HD6 254 120 120
223 Tint Center (CM) PAL2/HD8/HD10/PAL4 254 115 115
224 Tint Center (CM) NT3/HD1/HD2/HD5/PAL3/HD7/HD9 254 124 124
225 Center of Sharpness (HV Enhancer Gain for Y) For Europe TV 31 19 19
226 Center of Sharpness (HV Enhancer Gain for Y) For Europe VIDEO 31 18 18
227 Center of Sharpness (HV Enhancer Gain for Y) For Europe HD5/HD6 31 11 11
228 Center of Sharpness (HV Enhancer Gain for Y) For Europe HD1/HD4/HD7/HD8 31 7 7
229 Center of Sharpness (HV Enhancer Gain for Y) For Europe HD2/HD3/HD9/HD10 31 15 15
230 Center of Sharpness (HV Enhancer Gain for Y) For Europe NT2/NT3/PAL2/PAL3/NT4/PAL4 31 15 15
231 Center of Sharpness (HV Enhancer Gain for Y) For Europe TEXT(2 picture) 31 7 7
232 Maximum Value of Contrast at REAL/NORMAL mode 254 188 188
233 Offset Value of Contrast data at SPLIT mode 120 90 90
234 Offset value of gain for Black Stretch function except OFF/LOW/HIGH 63 33 33
235 Demonstration [White] 0-3:None 4:0 5:+10W 6:+20W 7:+30W Mode(common) 7 5 5
236 Demonstration 0:Normal 1:Peak Mode 1 1 -
237 Demonstration [Middle] 0:+0W 1:+10W 2:+20W 3:+30W Mode(common) 3 3 3
238 Demonstration 0:Normal 1:Peak Mode 1 - 0
239 Horizontal Enhance TEXT 3 3 3
240 YNR Input Level at Low level for DVI-STV Mode 1080i-60/1080i-50/720p-60 7 2 2
241 YNR Input Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 2 2
242 CNR Input Level at Low level for DVI-STV Mode 1080i-60/1080i-50/720p-60 7 2 2
243 CNR Input Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 2 2
244 Vertical Enhance TEXT 3 3 3
245 Demonstration Mode 0:off 1:on 1 0 0
246 Free
247 Free
248 HV Enhancer Gain for C TEXT 31 0 0
249 YNR(NR) Input Level RF Mode 7 1 1
250 YNR Input Level at Low level for AV1-4 Mode VIDEO 7 3 3
251 YNR Input Level at Low level for AV1-4 Mode NT2/NT3/PAL2/PAL3/NT4/PAL4 7 3 3
252 YNR Input Level at Low level for AV1-4 Mode HD1/HD4/HD5/HD6/HD7/HD8 7 3 3
253 YNR Input Level at Low level for AV1-4 Mode HD2/HD3/HD9/HD10 7 3 3
254 CNR Input Level at Low level for AV1-4 Mode VIDEO 7 3 3
255 CNR Input Level at Low level for AV1-4 Mode NT2/NT3/PAL2/PAL3/NT4/PAL4 7 3 3
256 CNR Input Level at Low level for AV1-4 Mode HD1/HD4/HD5/HD6/HD7/HD8 7 3 3
257 CNR Input Level at Low level for AV1-4 Mode HD2/HD3/HD9/HD10 7 3 3
258 Heat APC function available 0:NO, 1: YES 1 1 1
259 Gamma SW (0:1.0 1:2.2 2:2.8) TV/VIDEO 2 1 1
260 Gamma SW (0:1.0 1:2.2 2:2.8) DVI-PC/DVI-STB/DSUB-RGB 2 1 1
261 Select for APC function 1 0 0
262 "CCFMD" function TV/VIDEO 1 0 0
263 "CCFMD" function DVI-PC/DVI-STB/DSUB-RGB 1 0 0
264 NTSC/EBU(CCFORM) NT1/NT2/HD3/HD4/HD6/HD8/HD10/PAL1/PAL2 1 0 0
265 NTSC/EBU(CCFORM)
TV/VIDEO/NT3/PAL3/HD1/HD2/HD5/HD7/HD9/NT4/PAL4
1 0 0
266 NTSC/EBU(CCFORM) DVI-PC/DVI-STB/DSUB-RGB 1 0 0
Default Changed Component
ADJ.
No.
FORMATTER
PWB
For Asia
For Asia
For Asia
For Asia

14
32PD5000/42PD5000 (PW1)
15
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
267 Correction for Tracking (DCBON) TV/VIDEO-Color Temp. : COOL 1 0 0
268 Correction for Tracking (DCBON) TV/AV-Col. Temp. : Nor/War 1 1 1
269 Correction for Tracking (DCBON) DVI-PC/DVI-STB/DSUB-RGB 1 1 1
270 Color Temp. Correction 3 0 0
271 Typical Value of Contrast OSD DYNAMIC 31 31 31
272 PC Power Save function (0:Impossible 1:Possible) 1 1 1
273 Waite Time for POWER SAVE function (s) VIDEO/PC 254 15 15
274 Lower Limits value for Sync Detect of 2ms interval For Power Save at AV mode 254 5 5
275 Upper Limits Value for Sync Detect of 2ms interval For Power Save at AV mode 254 200 200
276 Horizontal Position of OSD 60Hz 15 7 7
277 Vertical Position of OSD 60Hz 15 7 7
278 PinP Function 0:PinP, 1:Infomation1, 2:Infomaiton Split 2 0 0
279 Select for WIDE Mode 1 1 1
280 Temperature for FAN Restart (Temp_High) 254 58 58
281 Temperature for FAN Stop (Temp_Low) 254 55 55
282 Internal Temperature Display 125 - -
283 PDP micom Version Display 255 - -
284 Total Operating Hours of PDP panel 65535 - -
285 Initialize function 0:Keep data, 1:Initialize 1 0 0
286 L standard PLL gating HIGH [Europe model] 1 0 0
287 Select for APC output [Except Europe model] Main FE 2 1 1
288 Other New function (Shin Doga mode) 0:Off, 1:On 50Hz 1 0 0
289 AGC adjustment (MFE) [Except Europe model] MAIN 63 50 50
290 AGC adjustment (MFE) [Europe model] MAIN 63 20 20
291 AGC INPUT(MFE) MAIN - - -
292 Other New function (Shin Doga mode) 0:Off, 1:On 70Hz(PC) 1 0 0
293 SUB CONTRAST AV2 MAIN/SUB COMPOSITE mode 15 8 8
294 SUB CONTRAST AV3 MAIN/SUB COMPOSITE mode 15 8 8
295 Contrast Center (CM) AV2 254 137 137
296 Contrast Center (CM) AV1 254 137 137
297 Brightness center (CM) offset AV2 254 127 127
298 Brightness center (CM) offset AV1 254 127 127
299 Other New function (Shin Doga mode) 0:Off, 1:On 60Hz 1 1 1
300 3D ON/OFF 0:ON,1:OFF(Through) 1 0 0
301 Input Select of TA1370 0:HD1/VD1,1:HD3/VD3 Main/Sub 1 0 0
302 Sharpness Gain(RF/NR) Main/Sub 15 3 3
303 3Line Y/C Main- Sub SW 0:Main, 1: Sub 1 0 0
304 Offset Value(+/-) of Upper Limit (for TB1274:SUB-CONT) Single Picture mode 18 2 2
305 Offset Value(+/-) of Upper Limit (for FC :RGB-AMP ) Multi Picture mode 18 2 2
306 Reference Amplitude(RGB_AMP) Multi Picture mode 254 127 127
307 Component Frq.(fH) Setup (0:28/31/33/45KHz,1:28/31/45KHz) 1 0 0
308 Terget value of White peak Adj. Single Picture mode 237 235 235
309 Sharpness Gain(S VIDEO) Main 15 7 7
310 Sharpness Gain(S VIDEO) Sub 15 7 7
311 Select color control (0: Asia, 1: South America) Main/Sub 1 0 0
312 Sharpness Gain Main(N-PAL) 15 8 8
313 Sharpness f0 Main(N-PAL) 3 2 2
314 Sharpness Gain Sub (N-PAL) 15 9 9
315 Sharpness f0 Sub (N-PAL) 3 2 2
316 Delay Time ON/OFF for Lipsync circuit 0:Off, 1:On 1 1 1
317 Sync Mode SW 7 0 0
318 Set Sound System at Auto mode of Sound Sys. (0:auto,1:4.5MHz) Main/Sub 1 0 0
319 Power Restart by cancelling reset from Power Save Mode in PC input 0:keep last condition 1:restart 1 0 0
320
Change Europe Model for Destination of North America (OSD, Wide Mode etc.) available
0:NO 1:YES(DAY/NIGHT etc.) 1 0 0
321 Count Souce for ON/OFF Timer 0:MCU-250ms, 1:AC-50/60Hz 1 0 0
322 Wide Mode Selection for Europe (Normal: 5 modes, For Service: 10 modes) 0:Normal 1:For Service 1 0 0
323 Forced AVC type available 0:Normal type , 1: Forced AVC type 1 0 0
324 Sharpness Gain Main(M-PAL) 15 8 8
325 Sharpness f0 Main(M-PAL) 3 2 2
326 Sharpness Gain Sub (M-PAL) 15 9 9
327 Sharpness f0 Sub (M-PAL) 3 2 2
328 CNR Input Level at Low level for Dsub Comp. Mode NT2/NT3/PAL2/PAL3/NT4/PAL4 7 2 2
329 CNR Input Level at Low level for Dsub Comp. Mode HD1/HD4/HD5/HD6/HD7/HD8 7 2 2
330 CNR Input Level at Low level for Dsub Comp. Mode HD2/HD3/HD9/HD10 7 2 2
331 Sharpness Gain(VIDEO) NTSC3.58 MAIN 15 9 9
332 Sharpness f0(VIDEO) NTSC3.58 MAIN 3 2 2
333 Sharpness Gain(VIDEO) NTSC3.58 SUB 15 8 8
334 Sharpness f0(VIDEO) NTSC3.58 SUB 3 2 2
335 Sharpness Gain(VIDEO) SECAM,B/W MAIN 15 10 10
336 Sharpness f0(VIDEO) SECAM,B/W MAIN 3 2 2
337 Sharpness Gain(VIDEO) SECAM,B/W SUB 15 8 8
338 Sharpness f0(VIDEO) SECAM,B/W SUB 3 2 2
339 Sharpness Gain(VIDEO) NTSC4.43 MAIN 15 9 9
340 Sharpness f0(VIDEO) NTSC4.43 MAIN 3 2 2
341 Sharpness Gain(VIDEO) NTSC4.43 SUB 15 8 8
342 Sharpness f0(VIDEO) NTSC4.43 SUB 3 2 2
343 Brightness Limitted Function of PANEL [APSON] 1 1 1
344 VsVa WAIT TIMER [RISTIM] 15 5 5
345 CONTRAST initial value Panel Life -Extend1 127 93 93
346 Correcting Time Interval Panel Life -Extend1 127 10 10
347 CONTRAST additional value Panel Life -Extend1 127 1 1
348 CONTRAST initial value Panel Life -Extend2 127 63 63
349 Correcting Time Interval Panel Life -Extend2 127 6 6
350 CONTRAST additional value Panel Life -Extend2 127 1 1
351 L_PLL.GAIN 1 0 0
352 Free
353 Free
354 Free
355 Free
Default Changed Component
ADJ.
No.
FORMATTER
PWB

14
32PD5000/42PD5000 (PW1)
15
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
356 SEPA_LEVEL_DSUB 480i/576i 3 2 2
357 SEPA_LEVEL_DSUB 480p/576p 3 2 2
358 SEPA_LEVEL_DSUB 1080i_50 3 2 2
359 SEPA_LEVEL_DSUB 1080i_60/720p 3 2 2
360 HD-PHASE_DSUB 480i/576i 63 20 20
361 HD-PHASE_DSUB 480p/576p 63 20 20
362 HD-PHASE_DSUB 1080i_50 63 20 20
363 HD-PHASE_DSUB 1080i_60/720p 63 20 20
364 Y_DL (L) MAIN 10 4 4
365 Y_DL (L') MAIN 10 4 4
366 Y_DL (L) Sub 10 1 1
367 Y_DL (L') Sub 10 1 1
368 Sharpness Gain(L) MAIN 15 10 10
369 Sharpness Gain(L') MAIN 15 10 10
370 Sharpness Gain(L) SUB 15 8 8
371 Sharpness Gain(L') SUB 15 8 8
372 Sharpness f0(L) MAIN 3 2 2
373 Sharpness f0(L') MAIN 3 2 2
374 BURN-IN enable/ disenable 0:Disenable, 1:Enable 1 1 1
375 BURN-IN mode 2 2 2
376 CM_THRESHOLD (D15-D8) - 254 0 0
377 CM_THRESHOLD (D7 -D0) - 254 36 36
378 Sharpness Gain(RF M) MAIN 15 11 11
379 Sharpness Gain(RF M) Sub 15 11 11
380 Sharpness f0 (RF M) Main 3 2 2
381 Sharpness f0 (RF M) SUB 3 2 2
382 Counting Value of 2ms Sync.Detect MAIN - - -
383 Counting Value of 2ms Sync.Detect SUB - - -
384 TB1274 Read Data(00h) Main - - -
385 TB1274 Read Data(01h) Main - - -
386 TB1274 Read Data(00h) Sub - - -
387 TB1274 Read Data(01h) Sub - - -
388 MSP Read Data (CNTROL ) (D15-D8 ) - - -
389 MSP Read Data (CNTROL ) (D7 -D0 ) - - -
390 MSP Read Data (STANDARD_RES) (D15-D8 ) - - -
391 MSP Read Data (STANDARD_RES) (D7 -D0 ) - - -
392 MSP Read Data (STATUS ) (D15-D8 ) - - -
393 MSP Read Data (STATUS ) (D7 -D0 ) - - -
394 TA1370G Read Data(00h) VIDEO PWB - - -
395 TA1370G Read Data(01h) VIDEO PWB - - -
396 TA1370G Read Data(00h) FORMATTER PWB - - -
397 TA1370G Read Data(01h) FORMATTER PWB - - -
398 uPD64084 Read Data(00H) - - -
399 uPD64084 Read Data(01h) - - -
400 Language (Refer to below) 6 0 0
401 Hotel Mode(0:No,1:Yes) 1 0 0
402 Analog Data (0:Keep EEPROM,1:Not Keep to EEPROM) 1 0 0
403 Maximum Volume Limit 63 63 63
404 Power Mode(0:Last mode, 1:Pos1, 2:V1, 3:V2, 4:V3, 5:V4) 5 0 0
405 Channel Select(0:CCIR, 1:CHINA) 1 0 0
406 Auto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan) 2 0 0
407 T/TEXT(0: None, 1:Yes) 1 1 1
408 TEXT Language 7 0 0
409 IIC BUS Data/Clock Open(0:Close, 1:Open) 1 0 0
410 Channel Preset(0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM,4:AUSTRALIA) 4 1 1
411 Detect and Display Tele-Cinema (0:normal 1:Tele-Cinema) - - -
412 V FREQ 60Hz Force (0:None, 1:Yes) Main/Sub 1 0 0
413 COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC, ) Main - - -
414 COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC, ) Sub - - -
415 Horizontal Filter SW [HHPF0] NTSC 1 0 0
416 Enhancer Gain [HHPF1] PAL 1 0 0
417 Enhancer Gain [HHPF2] HD 1 0 0
418 Horizontal Coring Level (Enhancer Gain) AS[HECOR0_PO] NT1-RF 15 - 1
419 Horizontal Coring Level (Enhancer Gain) AS[HECOR1_PO] PAL1-RF / Multi picture 15 - 1
420 Horizontal Coring Level (Enhancer Gain) [HECOR2_PO] NT1-Video 15 - 1
421 Horizontal Coring Level (Enhancer Gain) [HECOR3_PO] PAL1-Video 15 - 1
422 Horizontal Coring Level (Enhancer Gain) [HECOR4_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 - 1
423 Horizontal Coring Level (Enhancer Gain) [HECOR5_PO] HD2/HD3/HD9/HD10 15 - 1
424 Horizontal Coring Level (Enhancer Gain) [HECOR6_PO] HD1/HD4/HD5/HD6/HD7/HD8 15 - 0
425 Horizontal Coring Level (Enhancer Gain) [HECORPC_PO] PC 15 - 1
426 Horizontal Coring Level (Enhancer Gain) EU[HECORE_PO] PAL1-RF / Multi picture 15 - 1
427 Vertical Coring Level (Enhancer Gain) AS[VECOR0_PO] NT1-RF 15 - 1
428 Vertical Coring Level (Enhancer Gain) AS[VECOR1_PO] PAL1-RF / Multi picture 15 - 1
429 Vertical Coring Level (Enhancer Gain) [VECOR2_PO] NT1-Video 15 - 1
430 Vertical Coring Level (Enhancer Gain) [VECOR3_PO] PAL1-Video 15 - 1
431 Vertical Coring Level (Enhancer Gain) [VECOR4_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 - 0
432 Vertical Coring Level (Enhancer Gain) [VECOR5_PO] HD2/HD3/HD9/HD10 15 - 0
433 Vertical Coring Level (Enhancer Gain) [VECOR6_PO] HD1/HD4/HD5/HD6/HD7/HD8 15 - 0
434 Vertical Coring Level (Enhancer Gain) [VECORPC_PO] PC 15 - 0
435 Vertical Coring Level (Enhancer Gain) EU[VECORE_PO] PAL1-RF / Multi picture 15 - 0
436 Horizontal Coring Level (Enhancer Gain) AS[HECOR0_P1] NT1-RF 15 1 -
437 Horizontal Coring Level (Enhancer Gain) AS[HECOR0_P2] PAL1-RF / Multi picture 15 1 -
438 Horizontal Coring Level (Enhancer Gain) [HECOR0_P3] NT1-Video 15 1 -
439 Horizontal Coring Level (Enhancer Gain) [HECOR0_P4] PAL1-Video 15 1 -
440 Horizontal Coring Level (Enhancer Gain) [HECOR0_P5] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 1 -
441 Horizontal Coring Level (Enhancer Gain) [HECOR0_P6] HD2/HD3/HD9/HD10 15 1 -
442 Horizontal Coring Level (Enhancer Gain) [HECOR0_P7] HD1/HD4/HD5/HD6/HD7/HD8 15 0 -
443 Horizontal Coring Level (Enhancer Gain) [HECORPC_P1] PC 15 1 -
444 Horizontal Coring Level (Enhancer Gain) EU[HECORE_P1] PAL1-RF / Multi picture 15 1 -
Default Changed Component
ADJ.
No.
FORMATTER
PWB

16
32PD5000/42PD5000 (PW1)
17
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
445 Vertical Coring Level (Enhancer Gain) AS[VECOR0_P1] NT1-RF 15 1 -
446 Vertical Coring Level (Enhancer Gain) AS[VECOR0_P2] PAL1-RF / Multi picture 15 1 -
447 Vertical Coring Level (Enhancer Gain) [VECOR0_P3] NT1-Video 15 1 -
448 Vertical Coring Level (Enhancer Gain) [VECOR0_P4] PAL1-Video 15 1 -
449 Vertical Coring Level (Enhancer Gain) [VECOR0_P5] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0 -
450 Vertical Coring Level (Enhancer Gain) [VECOR0_P6] HD2/HD3/HD9/HD10 15 0 -
451 Vertical Coring Level (Enhancer Gain) [VECOR0_P7] HD1/HD4/HD5/HD6/HD7/HD8 15 0 -
452 Vertical Coring Level (Enhancer Gain) [VECORPC_P1] PC 15 0 -
453 Vertical Coring Level (Enhancer Gain) EU[VECORE_P1] PAL1-RF / Multi picture 15 0 -
454 YFRNR Input Gain (Main) 2 pictures [MYNRG0] HD-except HD 7 1 1
455 <HD-NTSC,HD-PAL(Sub) [MYNRG1] HD-HD 7 4 4
456 4 pictures [MYNRG2] NT-*/PAL-* 7 1 1
457 [MYNRG3] HD-* 7 4 4
458 YFRNR Input Gain (Sub) [YCNRG0] 2 pictures 7 4 4
459 [YCNRG1] 4pictures/12pictures 7 1 1
460 CFRNR Input Gain (Main) 2 pictures [MCNRG0] HD-except HD 7 3 3
461 <HD-NTSC,HD-PAL(Sub) [MCNRG1] HD-HD 7 4 4
462 [MCNRG2] NT-*/PAL-* 7 4 4
463 [MCNRG3] HD-* 7 4 4
464 CFRNR Input Gain (Sub) [SCNRG0] 2 pictures 7 3 3
465 [SCNRG1] 4pictures/12pictures 7 4 4
466 YFRNR Transition Level (Main/Sub) [MYNRP0] NT1/ PAL1 / Multi picture 7 0 0
467 [MYNRP5] NT1/PAL1-Video 7 0 0
468 [MYNRP6] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 0 0
469 [MYNRP7] HD2/HD3/HD9/HD10 7 0 0
470 [MYNRP8] HD1/HD4/HD5/HD6/HD7/HD8 7 0 0
471 CFRNR Transition Level (Main/Sub) [MCNRP0] NT1/ PAL1 / Multi picture 7 2 2
472 [MCNRP5] NT1/PAL1-Video 7 2 2
473 [MCNRP6] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 2 2
474 [MCNRP7] HD2/HD3/HD9/HD10 7 2 2
475 [MCNRP8] HD1/HD4/HD5/HD6/HD7/HD8 7 0 0
476 Vertical Enhancer Gain for Y/G [YVEG0_P0] NTSC/PAL(-except RF) 15 - 8
477 [YVEG1_P0] HD2/HD3/HD9/HD10 15 - 12
478 [YVEG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 15 - 8
479 AS[YVEG3_P0] PAL1-RF / Multi picture 15 - 8
480 EU[YVEG0_E_P0] PAL1-RF / Multi picture 15 - 8
481 Vertical DSB Gain For Y/G [YVDSBG0_P0] NTSC/ PAL / Multi picture 3 - 0
482 [YVDSBG1_P0] HD2/HD3/HD9/HD10 3 - 0
483 [YVDSBG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 - 0
484 Vertical DSB Coring for Y/G [YVDSBG0_P0] NTSC/ PAL / Multi picture 7 - 0
485 [YVDSBG1_P0] HD 7 - 3
486 Vertical Enhancer Clip for Y/G 0:LTI [YVECLP0_P0] NTSC/ PAL / Multi picture 1 - 1
487 [YVECLP1_P0] HD 1 - 1
488 Vertical Clip Offset Level [YVECLP0_P0] NTSC/ PAL / Multi picture 15 - 7
489 [YVECLP1_P0] HD 15 - 1
490 Vertical Non Linear Peaking for Y/G [YVNLP0_P0] NTSC/ PAL / Multi picture 63 - 0
491 [YVNLP1_P0] HD 63 - 0
492 Horizontal HPF Peak Freq. SW for Y/G [YHHPF0_P0] NTSC/ PAL / Multi picture 3 - 2
493 [YHHPF1_P0] HD2/HD3/HD9/HD10 3 - 1
494 [YHHPF2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 - 1
495 Horizontal Enhancer Gain for Y/G [YHEG0_P0] NTSC/PAL(-except RF) 15 - 15
496 [YHEG1_P0] HD2/HD3/HD9/HD10 15 - 15
497 [YHEG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 15 - 0
498 AS[YHEG3_P0] PAL1-RF / Multi picture 15 - 15
499 EU[YHEG0_E_P0] PAL1-RF / Multi picture 15 - 15
500 Horizontal DSB Gain For Y/G [YHDSBG0_P0] NTSC/ PAL / Multi picture 3 - 2
501 [YHDSBG1_P0] HD2/HD3/HD9/HD10 3 - 0
502 [YHDSBG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 - 0
503 Horizontal DSB Coring for Y/G [YHDSBC0_P0] NTSC/ PAL / Multi picture 7 - 4
504 [YHDSBC1_P0] HD 7 - 0
505 Horizontal Enhancer Clip for Y/G 0:LTI [YHECLP0_P0] NTSC/ PAL / Multi picture 1 - 0
506 [YHECLP1_P0] HD 1 - 0
507 Horizontal Clip Offset Level for Y/G AS[YHECLPL0_P0] RF / Multi picture 15 - 2
508 AS[YHECLPL1_P0] NT1-except RF / PAL1-except RF 15 - 2
509 [YHECLPL2_P0] HD 15 - 1
510 EU[YHECLPL0_E_P0] RF / Multi picture 15 - 4
511 EU[YHECLPL1_E_P0] NT1-except RF / PAL1-except RF 15 - 4
512 Horizontal Non Linear Peaking for Y/G [YHNLP0_P0] NTSC/ PAL / Multi picture 63 - 0
513 [YHNLP1_P0] HD 63 - 0
514 Coring Amplitude for Y/G [YCOR0_PO] NT1-RF/ PAL1-RF / Multi picture 7 - 7
515 [YCOR1_PO] NT1-Video / PAL1-Video 7 - 5
516 [YCOR2_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 - 3
517 [YCOR3_PO] HD2/HD3/HD9/HD10 7 - 1
518 [YCOR4_PO] HD1/HD4/HD5/HD6/HD7/HD8 7 - 1
519 Vertical Enhancer Gain for Y/G [YVEG0_P1] NTSC/PAL(-except RF) 15 8 -
520 [YVEG1_P1] HD2/HD3/HD9/HD10 15 12 -
521 [YVEG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 15 8 -
522 AS[YVEG3_P1] PAL1-RF / Multi picture 15 8 -
523 EU[YVEG0_E_P1] PAL1-RF / Multi picture 15 8 -
524 Vertical DSB Gain for Y/G [YVDSBG0_P1] NTSC/ PAL / Multi picture 3 0 -
525 [YVDSBG1_P1] HD2/HD3/HD9/HD10 3 0 -
526 [YVDSBG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 0 -
527 Vertical DSB Coring for Y/G [YVDSBC0_P1] NTSC/ PAL / Multi picture 7 0 -
528 [YVDSBC1_P1] HD 7 3 -
529 Vertical Enhancer Clip for Y/G 0:LTI [YVECLP0_P1] NTSC/ PAL / Multi picture 1 1 -
530 [YVECLP1_P1] HD 1 1 -
531 Vertical Clip Offset Level for Y/G [YVECLP0_P1] NTSC/ PAL / Multi picture 15 7 -
532 [YVECLP1_P1] HD 15 1 -
533 Vertical Non Linear Peaking for Y/G [YVNLP0_P1] NTSC/ PAL / Multi picture 63 0 -
Default Changed Component
ADJ.
No.
FORMATTER
PWB

16
32PD5000/42PD5000 (PW1)
17
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
534 [YVNLP1_P1] HD 63 0 -
535 Horizontal HPF Peak Freq. SW for Y/G [YHHPF0_P1] NTSC/ PAL / Multi picture 3 2 -
536 [YHHPF1_P1] HD2/HD3/HD9/HD10 3 1 -
537 [YHHPF2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 1 -
538 Horizontal Enhancer Gain for Y/G [YHEG0_P1] NTSC/PAL(-except RF) 15 15 -
539 [YHEG1_P1] HD2/HD3/HD9/HD10 15 15 -
540 [YHEG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 15 15 -
541 AS[YHEG3_P1] PAL1-RF / Multi picture 15 15 -
542 EU[YHEG0_E_P1] PAL1-RF / Multi picture 15 15 -
543 Horizontal DSB Gain for Y/G [YHDSBG0_P1] NTSC/ PAL / Multi picture 3 2 -
544 [YHDSBG1_P1] HD2/HD3/HD9/HD10 3 0 -
545 [YHDSBG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 0 -
546 Horizontal DSB Coring for Y/G [YHDSBC0_P1] NTSC/ PAL / Multi picture 7 7 -
547 [YHDSBC1_P1] HD 7 0 -
548 Horizontal Enhancer Clip for Y/G 0:LTI [YHDSBC0_P1] NTSC/ PAL / Multi picture 1 0 -
549 [YHDSBC1_P1] HD 1 0 -
550 Horizontal Clip Offset Level for Y/G AS[YHCLPL0_P1] RF / Multi picture 15 1 -
551 AS[YHCLPL1_P1] NT1-except RF/PAL1-except RF 15 1 -
552 [YHECLPL2_P1] HD 15 0 -
553 EU[YHECLPL0_E_P1] RF / Multi picture 15 4 -
554 EU[YHECLPL1_E_P1] NT1-except RF/PAL1-except RF 15 4 -
555 Horizontal Non Linear Peaking for Y/G [YHNLP0_P1] NTSC/ PAL / Multi picture 63 0 -
556 [YHNLP1_P1] HD 63 0 -
557 Coring Amplitude for Y/G [YC0R0_P1] NT1-RF/PAL1-RF / Multi picture 7 7 -
558 [YC0R1_P1] NT1-Video/PAL1-Video 7 5 -
559 [YC0R2_P1] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 3 -
560 [YC0R3_P1] HD2/HD3/HD9/HD10 7 1 -
561 [YC0R4_P1] HD1/HD4/HD5/HD6/HD7/HD8 7 1 -
562 Vertical Enhancer Gain for B-Y/B, R-Y/R [CVEG0] NTSC/ PAL / Multi picture 15 15 15
563 [CVEG1] HD 15 9 9
564 Vertical DSB Gain for B-Y/B , R-Y/R [CVDSBG0] NTSC/ PAL / Multi picture 3 0 0
565 [CVDSBG1] HD 3 0 0
566 Vertical DSB Coring for B-Y/B, R-Y/R [CVDSBC0] NTSC/ PAL / Multi picture 7 0 0
567 [CVDSBC1] HD 7 0 0
568 Vertical Enhancer Clip for B-Y/B, R-Y/R 0:CTI [CVECLP0] NTSC/ PAL / Multi picture 1 0 0
569 [CVECLP1] HD 1 0 0
570 Horizontal HPF Peak Freq. SW for B-Y/B, R-Y/R [CHHPF0] NTSC/ PAL / Multi picture 3 2 2
571 [CHHPF1] HD 3 2 2
572 Horizontal Enhancer Gain for B-Y/B, R-Y/R [CHEG0] NTSC/ PAL / Multi picture 15 15 15
573 [CHEG1] HD 15 9 9
574 Horizontal DSB Gain for B-Y/B, R-Y/R [CHDSBG0] NTSC/ PAL / Multi picture 3 0 0
575 [CHDSBG1] HD 3 0 0
576 Horizontal DSB Coring for B-Y/B, R-Y/R [CHDSBC0] NTSC/ PAL / Multi picture 7 0 0
577 [CHDSBC1] HD 7 0 0
578 Horizontal Enhancer Clip for B-Y/B, R-Y/R 0:CTI [CHECLP0] NTSC/ PAL / Multi picture 1 0 0
579 [CHECLP1] HD 1 0 0
580 Coring Amplitude for B-Y/B, R-Y/R [CC0R0] NTSC/ PAL / Multi picture 7 1 1
581 [CC0R1] HD 7 1 1
582 B-Y Clamp offset [Except D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128 128
583 R-Y Clamp offset [Except D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128 128
584 B-Y Clamp offset [Except D Sub Component] HD1/4,HD7/8 255 128 128
585 R-Y Clamp offset [Except D Sub Component] HD1/4,HD7/8 255 128 128
586 B-Y Clamp offset [Except D Sub Component] HD5/6 255 128 128
587 R-Y Clamp offset [Except D Sub Component] HD5/6 255 128 128
588 B-Y Clamp offset [D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128 128
589 R-Y Clamp offset [D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128 128
590 B-Y Clamp offset [D Sub Component] HD1/4,HD7/8 255 128 128
591 R-Y Clamp offset [D Sub Component] HD1/4,HD7/8 255 128 128
592 B-Y Clamp offset [D Sub Component] HD5/6 255 128 128
593 R-Y Clamp offset [D Sub Component] HD5/6 255 128 128
594 B-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128 128
595 R-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128 128
596 B-Y Clamp offset [DVI-STB] 1080i-50/1080i-60 255 128 128
597 R-Y Clamp offset [DVI-STB] 1080i-50/1080i-60 255 128 128
598 B-Y Clamp offset [DVI-STB] 720p-60 255 128 128
599 R-Y Clamp offset [DVI-STB] 720p-60 255 128 128
600 Y OUT LEVEL M (4.5) For Asia Main 63 15 15
601 Y OUT LEVEL B/G (5.5) For Asia Main 63 13 13
602 Y OUT LEVEL D/K (6.5) For Asia Main 63 16 16
603 Y OUT LEVEL I (6.0) For Asia Main 63 14 14
604 Y OUT LEVEL B/G (5.5) For Europe Main 63 13 13
605 Y OUT LEVEL D/K (6.5) For Europe Main 63 16 16
606 Y OUT LEVEL I (6.0) For Europe Main 63 19 19
607 Y OUT LEVEL L (6.5) For Europe Main 63 13 13
608 Y OUT LEVEL L' (6.1) For Europe Main 63 12 12
609 Y OUT LEVEL M (4.5) For US Main 63 13 13
610 C OUT LEVEL M (4.5) For Asia Main 63 13 13
611 C OUT LEVEL B/G (5.5) For Asia Main 63 13 13
612 C OUT LEVEL D/K (6.5) For Asia Main 63 13 13
613 C OUT LEVEL I (6.0) For Asia Main 63 13 13
614 C OUT LEVEL B/G (5.5) For Europe Main 63 8 8
615 C OUT LEVEL D/K (6.5) For Europe Main 63 8 8
616 C OUT LEVEL I (6.0) For Europe Main 63 3 3
617 C OUT LEVEL L (6.5) For Europe Main 63 8 8
618 C OUT LEVEL L' (6.1) For Europe Main 63 8 8
619 C OUT LEVEL M (4.5) For US Main 63 13 13
620 Y OUT LEVEL M (4.5) For Asia Sub 63 14 14
621 Y OUT LEVEL B/G (5.5) For Asia Sub 63 13 13
622 Y OUT LEVEL D/K (6.5) For Asia Sub 63 15 15
Default Changed Component
ADJ.
No.
FORMATTER
PWB

18
32PD5000/42PD5000 (PW1)
19
32PD5000/42PD5000 (PW1)
: should be adjusted
: should be followed previous data
Function Maximum
Adjustment Items Mode Value 32" 42" VIDEO
PWB
TUNER
PWB
PDP
Panel
623 Y OUT LEVEL I (6.0) For Asia Sub 63 13 13
624 Y OUT LEVEL B/G (5.5) For Europe Sub 63 13 13
625 Y OUT LEVEL D/K (6.5) For Europe Sub 63 16 16
626 Y OUT LEVEL I (6.0) For Europe Sub 63 20 20
627 Y OUT LEVEL L (6.5) For Europe Sub 63 13 13
628 Y OUT LEVEL L' (6.1) For Europe Sub 63 13 13
629 Y OUT LEVEL M (4.5) For US Sub 63 13 13
630 C OUT LEVEL M (4.5) For Asia Sub 63 13 13
631 C OUT LEVEL B/G (5.5) For Asia Sub 63 13 13
632 C OUT LEVEL D/K (6.5) For Asia Sub 63 13 13
633 C OUT LEVEL I (6.0) For Asia Sub 63 13 13
634 C OUT LEVEL B/G (5.5) For Europe Sub 63 13 13
635 C OUT LEVEL D/K (6.5) For Europe Sub 63 13 13
636 C OUT LEVEL I (6.0) For Europe Sub 63 13 13
637 C OUT LEVEL L (6.5) For Europe Sub 63 13 13
638 C OUT LEVEL L' (6.1) For Europe Sub 63 13 13
639 C OUT LEVEL M (4.5) For US Sub 63 13 13
640 Contrast Center (CM) DVI-PC 254 128 128
641 Contrast Center (CM) DVI-STB (With Setup) 254 149 149
642 Contrast Center (CM) DVI-STB (Without Setup) 254 128 128
643 Contrast Center (CM) DSUB-RGB 254 128 128
644 Contrast Center (CM) Expand DSUB-RGB (Reserved) 254 128 128
645 Contrast Center (CM) DSUB-COMP 254 137 137
646 Brightness Center (CM) DVI-PC 254 128 128
647 Brightness Center (CM) DVI-STB 254 128 128
648 Brightness Center (CM) DSUB-RGB 254 128 128
649 Brightness Center (CM) Expand DSUB-RGB (Reserved) 254 128 128
650 Brightness Center Offset DSUB-COMP 254 127 127
651 Color Center (CM) DVI-PC 127 77 77
652 Color Center (CM) DVI-STB (480i/576i/480p/576p) 127 77 77
653 Color Center (CM) DVI-STB (720p-60/1080i-60/1080i-50 127 77 77
654 Color Center (CM) DVI-STB (VGA) 127 77 77
655 Color Center (CM) DSUB-RGB 127 77 77
656 Tint Center (CM) DVI-PC 254 128 128
657 Tint Center (CM) DVI-STB (480i/576i/480p/576p) 254 128 128
658 Tint Center (CM) DVI-STB (720p-60/1080i-60/1080i-50 254 128 128
659 Tint Center (CM) DVI-STB (VGA) 254 128 128
660 Tint Center (CM) DSUB-RGB 254 128 128
661 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (480i/576i) 31 3 3
662 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (480p/576p) 31 2 2
663 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (720p-60) 31 2 2
664 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (1080i-60/1080i-50) 31 2 2
665 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (VGA) 31 2 2
666 DVI-STB Setup 0:None VGA/Others Yes, 1:All none 2:All have DVI-STB mode 2 0 0
667 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) DVI-PC 1 0 0
668 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) DVI-STB 1 0 0
669 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) AVC 1 0 0
670 Horizontal Clip Offset Level for Y/G AS[YHECLPL3_P0] NT2 4/PAL2 4 15 - 10
671 EU[YHECLPL3_E_P0] NT2 4/PAL2 4 15 - 10
672 Horizontal Clip Offset Level for Y/G AS[YHCLPL3_P1] NT2 4/PAL2 4 15 2 -
673 EU[YHECLPL3_E_P1] NT2 4/PAL2 4 15 5 -
674 Y_DL (4.5MHz) For US Main 10 7 7
675 Y_DL (4.6MHz) For US Sub 10 7 7
676 Y_DL (5.5MHz PAL/NTSC4.43) For Europe Main 10 4 4
677 Y_DL (5.5MHz SECAM) For Europe Main 10 1 1
678 Y_DL (6.0PAL/NTSC4.43) For Europe Main 10 8 8
679 Y_DL (6.0SECAM) For Europe Main 10 5 5
680 Y_DL (5.5MHz PAL/NTSC4.43) For Europe Sub 10 2 2
681 Y_DL (5.5MHz SECAM) For Europe Sub 10 0 0
682 Y_DL (6.0PAL/NTSC4.43) For Europe Sub 10 4 4
683 Y_DL (6.0SECAM) For Europe Sub 10 0 0
684 Y_DL (6.5MHz PAL/NTSC4.43) For Europe Main 10 5 5
685 Y_DL (6.5MHz SECAM) For Europe Main 10 5 5
686 Y_DL (6.5MHz PAL/NTSC4.43) For Europe Sub 10 2 2
687 Y_DL (6.5MHz SECAM) For Europe Sub 10 0 0
688 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US TV 31 19 19
689 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US VIDEO 31 24 24
690 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD5/HD6 31 11 11
691 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD1/HD4/HD7/HD8 31 7 7
692 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD2/HD3/HD9/HD10 31 15 15
693 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US NT2/NT3/PAL2/PAL3/NT4/PAL4 31 9 9
694 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US TEXT(2 picture) 31 15 15
695 Contrast mode SW (TV-Dynamic) 0:Dynamic 1:Dynamic+Auto TV 1 0 0
696 V detection(FORMATTER PWB)
0:out of range 128:NO V (or out of spec.) 255:interrupt
50/60Hz 255
697 H detection(FORMATTER PWB)
0:out of range 128:NO H (or out of spec.) 255:interrupt
15/28/31/33/45kHz 255
698 V detection(VIDEO PWB) 0:out of range 128:NO V 255:interrupt 50/60Hz 255
699 H detection(VIDEO PWB) 0:out of range 128:NO H 255:interrupt 15/28/31/33/45kHz 255
700 RGB Amp.Gain Adjustment (FLAON) Main - - -
701 RGB Amp.Gain Adjustment Sub - - -
702 Automatic White Peak Adj. (Single Picture) Single Picture mode - - -
703 Automatic White Peak Adj. (Multi Picture) Multi Picture mode - - -
704 EEPROM Initialize (0:No, 1:Yes) 1 0 0
705 Adjustment Menu of FC4 - - -
Default Changed Component
ADJ.
No.
FORMATTER
PWB

18
32PD5000/42PD5000 (PW1)
19
32PD5000/42PD5000 (PW1)
The Expression of input signal mode (format) ....... for 42PD5000MA, 32/42PD5000TA
PAL1: RF, S and Composite of PAL/SECAM
PAL2: Component of PAL (YCBCR)
PAL3: Component of PAL (YPBPR)
PAL4: Component of PAL (YCBCR-SCART)
PAL: PAL1-4
NT1: S and Composite of NTSC
NT2: Component of NTSC (YCBCR)
NT3: Component of NTSC (YPBPR)
NT4: Component of NTSC (YCBCR-SCART)
NTSC: NTSC1-4
HD1-6: Component (shown in the table )
HD7: Component of 1080i/50 (YPBPR)
HD8: Component of 1080i/50 (YCBCR)
HD9: Component of 576p (YPBPR)
HD10: Component of 576p (YCBCR)
HD: HD1-10 of Component
TV: NTSC / HD
PC: PC signal
Video
Input System Judgment of H.Frequency
Video Input
Setup Mode
AV1
AV2
PAL 15.75kHz
(576i)
Auto PAL2
SDTV/DVD PAL2
HDTV PAL3
NTSC 15.75kHz
(480i)
Auto NT2
SDTV/DVD NT2
HDTV NT3
PAL 31.25kHz
(576p)
Auto HD10
SDTV/DVD HD10
HDTV HD9
NTSC 31.50kHz
(480p)
Auto HD3
SDTV/DVD HD3
HDTV HD2
NTSC 45.00kHz
(720p)
Auto HD5
SDTV/DVD HD6
HDTV HD5
PAL 28.125kHz
(1080i)
Auto HD7
SDTV/DVD HD8
HDTV HD7
NTSC 33.75kHz
(1080i)
Auto HD1
SDTV/DVD HD4
HDTV HD1
Factory Reset
After all of the adjustments of main chassis are finished, perform FACTORY RESET.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The unit is set to factory settings.

20
32PD5000/42PD5000 (PW1)
21
32PD5000/42PD5000 (PW1)
Item Vs and Va VOLTAGE ADJUSTMENT
Applicable Model All models
Preparation Procedure
(1) Keep heat-run for 1 minutes or more. (1) If the difference between the printed voltage of Vs
and the indicated value of Vs Voltmeter is over
0.1V, adjust the Vs ADJ VR located upward on the
Power Supply Unit to make it within 0.1V.
(2) Connect the DC Voltmeter to the Vs test point
and the GND point (or the Va test point and the
GND point) on the Power Supply Unit.
(2) If the difference between the printed voltage of Va
and the indicated value of Va Voltmeter is over
0.2V, adjust the Va ADJ VR located upward on the
Power Supply Unit to make it within 0.2V.
(3) Receive the all black signal with no setup. (3) Check and do the procedure (1) again.
(4) Check the indication of Vs and Va voltages
printed on the label located upper right side on
the Panel Module.
<Example of the Voltage Label>
<LOT> **************
Vs= 80.0V Va=60.0V
Vw=140.0V Vx=60.0V
Power
Supply
Unit
X-sus
Y-sus
(Rear View)
Panel Module
Label
Vs ADJ
Va ADJ
Vs
GND
Va
MPF7409
S/N ********* *
MADE IN JAPAN
Power Supply Unit