Hitachi KP-FD500GV User manual

MODEL KP-FD500GV
KP-FD500GV
Specifications
Prod. Code - Order No.
STORED DATE
DESIGNED DATE
CHECKED DATE
APPROVED DATE
REV.
2
1
3
4
TOLERANCE
SCALE
UNIT F
E
D
C
B
A
SHEET
1
9
DWG.
No.
TITLE
DF022-4PE-T1
2
1
3
4
F
E
D
C
B
A
Gigabit Ethernet
Progressive scan CCD color camera
KP-FD500GV
Specifications (Preliminary) Ver.1.00
1. General
The KP-FD500GV is single CCD type RGB color camera which utilized the progressive scan CCD
image sensor with square pixel for SXGA format of 2/3-inch which adopted the RGB primal color
mosaic filter. By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1
Gbps can be possible. Moreover, by using hub or switcher, construction of multiple camera system
can be easily performed.
2. Outstanding features
(1) High resolution and color fidelity
The 2/3-inch 5,010,000 pixels square lattice progressive scan CCD and the RGB primary color
mosaic filter achieve a high resolution and high color fidelity of 2448(H) x 2050(V).
(2) Gigabit Ethernet interface
High-speed serial interface Gigabit Ethernet is supported and direct connection is possible to
PC by the diameter cable of thin as compared with parallel output. It is possible to 100m.
(3) GigE Vision (Ver. 1.00) correspondence
Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed
data transmit is available and suitable for image processing.
(4) GENiCAM (Ver. 1.00) correspondence
Development of camera control system is easy because industrial camera control API
"GENiCAM" lead EMVA (European Machine Vision Association).
(5) PoE correspondence
Power supply can be input via Ethernet cable (Power over Ethernet).
(6) Remote control
- Multi-step electronic shutter (from 1/8 to 1/50000 second in 8 steps)
- Variable shutter (from 10 to 1/100000 second)
- The image capture at desired timing using the external trigger signal
- White balance (ATW, Manual and One-push)
- 6 color independent masking (R, G, B, Cy, Mg, Ye can be independently varied)
and other various functions are set by remote control via a Gigabit Ethernet cable.
-May.31,2008
(first edition)
SYMBOL
DATE DESCRIPTION (DRAWN)
DESIGNED
0
0

SHEET
2
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
3. Specifications
(1) Imaging device 2/3-inch progressive scan interline CCD
Total pixels 2536 (H) x 2068 (V)
Effective pixels 2456 (H) x 2058 (V)
Pixel size 3.45 um (H) x 3.45 um (V) (square lattice)
Color filter RGB primary color mosaic filter
(2) Scanning area 8.45 mm (H) x 7.07 mm (V)
(3) Scanning system Progressive
(4) Aspect ratio 5 : 4
(5) Frame rate 7 frames per second (full pixel readout RGB 8bit)
(6) Sync system Internal / external
(7) Lens mount C mount
(8) Flange focal distance 17.526 mm
(9) Video output
Interface Gigabit Ethernet
Protocol GigE Vision compliant
Transfer 1 Gbit per second
Image format RGB 8/10/12bit YUV(4:2:2) 8/10/12bit
RAW 8/10/12bit Mono 8/10/12bit
Maximum image size 2448 (H) x 2050 (V)
Frame rate 8 frame per second
*Frame rate is different for following format
RGB 10bit: 6 frame per second
RGB 12bit: 4 frame per second
(10) Sensitivity 2000lx, F8, 3200K
(11) Minimum illumination 10 lx (F1.4 GAIN MAX)
(12) Electric shutter OFF / Auto (AES) / Manual (PRESET or VARIABLE)
OFF is normal exposure (frame rate)
PRESET 1/8, 1/60, 1/100, 1/250, 1/1000, 1/2000,
1/10000, 1/50000 second.
VARIABLE 10 to 1/100000 second
(13) External trigger shutter
Mode Fixed shutter
One trigger
VD Sync
Reset control
Input Via Gigabit Ethernet cable (Software trigger)
12-pin connector (Hardware trigger)
Input level 24Vp-p +/- 1V
Threshold 3.7V +/- 0.5V (Low --> High)
3.3V +/- 0.5V (High --> Low)
Input polarity High / Low adjustable
Input delay Adjustable

SHEET
3
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
(14) External sync signal
VD output 5Vp-p +/- 0.3V
Strobe out 5Vp-p +/- 0.3V
Output polarity High / Low adjustable
Strobe delay Adjustable
Strobe duration Adjustable
(15) Partial scan Selectable start position and width of picture grabbing in 2H step.
(16) ALC (Auto level control) Adjustable for video level
(17) White balance ATW / MANUAL / One-push
(18) Gain Auto / Manual (0dB to 18db) (Approx. 0.0358dB step)
(19) Gamma OFF (γ=1) / ON
(20) Color masking OFF / ON (6 vector independent masking)
(21) Paint black Adjustable
(22) Sharpness Adjustable
(23) Black level Adjustable
(24) Knee Adjustable
(25) Power supply voltage DC+12V +/- 1V (input from 12-pin connector)
48V (PoE)
(26) Current consumption Approx. 6.0W (DC+12V)
(27) Ambient
Performance 0 to +40℃(+32 to +104 F), less than 90 % RH
Operation -10 to +50℃(+14 to 122 F), less than 90 % RH
Storage -20 to +60℃(-4 to 140 F), less than 70 % RH (without dew condensation)
(28) Vibration endurance 10 to 55 Hz (2.37 to 71.7 m/s2), sweep: 1 min XYZ 30min
(29) Shock endurance 490.3 m/s2(Drop test, once each top, bottom, left and right)
(30) External dimensions 44(W) x 29(H) x 72(D) mm (not including protrusions)
(31) Mass Approx. 140g

SHEET
4
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
4. Composition
(1) Camera (with IR cut filter)
(2) CD-ROM (Operation manual, Control software and SDK)
(3) Composition table
5. Optional accessories
(1) Dummy glass (AR coated) ARC1214
(2) IR cut filter IRC650
(3) Junction box JU-F30,
(4) Tripod adaptor TA-M1
(5) 12pin plug HR10A-10P-12S(01)
(6) Camera cable
Molded type Shield type
2 m C-201KSM C-201KSS
5 m C-501KSM C-501KSS
10 m C-102KSM C-102KSS
In the CE Marking region, use the shield type and install clamp filter
（ZCAT2035-0930A: TDK）at both ends of the cable.
(7) LAN cable (Commercial item) CAT5E Straight cable
CAT5E Cross cable
CAT6 Straight cable
CAT6 Cross cable

SHEET
5
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
6. Specification of Digital output connector
(1) Gigabit Ethernet connector
PIN NO.
Signal
1 TRP1+
2 TPR1-
3 TRP2+
4 TPR3+
5 TRP3-
6 TRP2-
7 TRP4+
8 TRP4-
Connector: RJ-45
*LED Status
STATUS LED1(Green) LED2 (Yellow)
Power ON Light Off Light On
Transmission Blink On Light On
Transmission pause Light Off Light On
(2) 12-pin connector
PIN NO.
Signal PIN NO.
Signal
1 GND (+12V) 7 TRIG-A / VD (H)
2 +12V 8 TRIG-B (C)
3 GND 9 TRIG-B (H)
4 AUX 10 FLASH / VD OUT
5 GND 11 N.C.
6 N.C. 12 TRIG-A / VD (C)
Connector (camera side) : SAMWOO SNH-10-12 (RPCB) or equivalent
Plug (matching cable plug) : Hirose HR10A-10P-12S (01) or equivalent
Please do not unplug and insert cable (camera cable) with a power supplied to a camera.
Install clamp filter (ZCAT 2035-0930A: TDK) at both ends (camera and video processor
ends) in the CE marking legion.
Please do not connect 1 pin and 3/5 pin when using PoE. When connecting it, PoE may stop
the power supply. Because TRIG-A/VD and TRIG-B are photo coupler input, 8/12 pin is
isolated with 1/3/5 pin. When 8/12 pin is connected to GND, please connect to 3 pin or 5 pin.
Note: Please do not input any signal to N.C. pin because machine may break down.
LED1 LED2

SHEET
6
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
8. Output sequence when format is RAW
9. Spectral response
R
1 2 ・・・ 2447
2448
1
2050
G R G
・
・
・
2
Pixel
G B G B
Line
G B G B
R G R G
2049
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
400 450 500 550 600 650 700
Wave Length (nm)
Relative Response
B
G
R
IR cut filter

SHEET
7
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
10. External view
ＰＬＡＴＥ ＲＡＴＥＤ
ＳＥＲ．ＮＯ．
ＤＣ ＩＮ/ＳＹＮＣ
Ｅｔｈｅｒｎｅｔ
Ｕ１
２６（φ２７.４）
７２.０
７７.２
６６.０８.７
２９
１４.５
４－Ｍ３（ＤＥＰＴＨ：３.５）
２５
２６
２１.２
６６.０８.７
２５
４－Ｍ２（ＤＥＰＴＨ：３.５）
４－Ｍ３（ＤＥＰＴＨ：３.５）
５.２
４４ （６.３）
ＣＯＬＯＲ：ＢＬＡＣＫ ＣＯＬＯＲ：ＢＬＡＣＫ
ＣＯＬＯＲ：ＢＬＡＣＫ
ＣＯＬＯＲ：ＢＬＡＣＫ
１３
ＳＥＥ ＭＡＮＵＡＬ
ＡＰＥＲＣＥＶＯＩＲ
ＭＡＮＵＥＬ
・ＭＡＳＳ： ＡＰＰＲＯＸ １４０ ｇ ・ＴＯＬＥＲＡＮＣＥ： ±０.５ ・ＵＮＩＴ： ｍｍ ・ＳＣＡＬＥ： ＮＴＳ

SHEET
8
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
Warranty and service:
(1) The guarantee period is one year after the data purchase.
However, the defects due to erroneous use or intentional act are excluded.
(2) As the defect after expiration of the guarantee period, where product repair is
possible, repair will be performed at charge.
(3) The present Warranty pertains only to the camera unit. Secondary malfunctions
attributable to camera failure as well as expenses incurred by disassembly and
reassembly of the related system, are beyond the scope of this Warranty.
(4) Compensation for loss of business, loss or damage to software, database and other
contingent losses are beyond the scope of this Warranty.
(5) Hitachi Kokusai Electric Inc. is not liable for the losses caused when the equipment
is used in a system, use for business trades, production process, medical fields,
crime prevention applications, etc.
(6) In the case of camera trouble by miss wiring of cable, it will be considered as out of
warranty.
RoHS Compliant
This product complies with the requirement of the RoHS(Restriction of
th
e use of Certain Hazardous Substances in Electrical and Electronic
Equipment) Directive 2002/95/EC
Notice:
These specifications are subject to change without prior notice due to
product improvement.
Confirm the most recent specifications at time of order.
Hitachi Kokusai certifies this product complies with the standard
warranty conditions of Hitachi K
okusai, and that quality control is
implemented to the extent required to comply with these conditions.

SHEET
9
9
DF022-4PE-S1
2
1
3
4
F
E
D
C
B
A
F
E
D
C
B
A
2
1
3
4
DWG.
No.
Modification history
SIMBLE
DATE CORRECTION AND REASONS DESIGNED