4. Connecting
##For#2-pins#connector#####
# # ##
#
#
# #
+
#
#
##For#9-pins#DB9#connector# #
#
#
#
#
5. Operation
Connect#the#RS232#cable#firstly#between#the#indicator#and#the#RDS#display,#as#above#figures,#and#then#
plug#the#power#cable,#it#will#detect#the#baud#rate#and#protocols#automatically,#if#it#detects#the#correct#
baud#rate#and#protocol,#it#will#display#the#same#weight#as#the#indicator#simultaneously;#if#the#data#is#
incompatible#with#the#protocols#of#RDS,#it#will#display#
No#Signal#
or#
Error
#
#
6. Protocols List
It#can#work#with#the#below#protocols,#if#your#protocol#is#not#in#the#list,#you#can#send#us#your#data#
format#(in#hex)#of#below#weight:#
Positive#with#decimal#point,## eg.:#20.00kg#(in#hex)#
Positive#without#decimal#point,## eg.:#20kg#(in#hex)#
Negative#with#decimal#point,## eg.:#-20.00kg#(in#hex)#
Negative#without#decimal#point,# eg.:#-20kg#(in#hex)#
#
#
A.
End#with#cr#If##
(Hex#=#0D#0A)
#
+
Moorange(N7+N=++
+
8?0/0%0*+!++
ST,GS##87,g### # (hex#format##53#54#2C#47#53#20#20#20#20#20#20#38#37#2C#67#20#0D#0A)#
+
8?0/0%0*+3+
ST,GS,#87g## # (hex#format##53#54#2C#47#53#2C#20#20#20#20#20#20#38#37#67#20#0D#0A)#
