HMDX HX-HP450 User manual
QUICK START GUIDE
HX-HP450
CONTENTS
CONTENIDO / CONTENU
Headset
Line-in Cable
USB Cable
Charge 3 hours for up to
15 hours of play time
Long press the play/pause
button for 2 seconds to
power on
Your headsets will
automatically power
off after 2 minutes of
unpaired inactivity.
Enable Bluetooth on your
device and choose HMDX
Journey from the list. If
prompted, enter code
“0000.”
Short press play/pause to
answer an incoming call.
Long press to reject.
Press play/pause to end
an active call.
AC Adaptor not included
Pairing Mode
Next Track
Volume Up
Play/Pause
Volume Down
Previous Track
Line-in Socket
Connected
Low Battery
Charging
Ready
CONTROLS
CONTROLES / COMMANDES
CHARGING
RECARGE DE BATERIAS / CHARGE
3h
2S
0.5S
3S
0.5S
120S
or
BLUETOOTH CONNECTION
CONECCION BLUETOOTH
BLUETOOTH
/ CONNEXION BLUETOOTH
Devices
HMDX Journey
on
>
SPEAKERPHONE CONTROLS NEED MORE HELP?
CUSTOMER SERVICE
CONTROLES PARA EL PARLANTE DEL TELEFONO /
COMMANDES DU TELEPHONE A HAUT-PARLEUR
NECESITA MAS AYUDA? / BESOIN D AIDE?
SERVICIO AL CLIENTE / SERVICE A LA CLIENTELE
www.jamaudio.com/
www.jamaudio.com
instruction-books
EN For complete user guide and to register
your product, visit us online.
ES Para la Gu a de Uso completa, y para registrar
su producto con nosotros, por favor visitenos
en la internet.
FR Pour consulter un guide complet de
l utilisateur et enregistrer votre appareil, visitez
notre site Web.
USA
1.888.802.0040
8:30am-7:00pm EST M-F / L-V
CANADA
1.888.225.7378
8:30am-5:00pm EST M-F / L-V
©2015 HMDX. All Rights Reserved.
HX-HP450
FCC & IC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interferenc
e, and (2) This device must accept any interference, including interference that may cause un
desired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radi
o exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
