Hobbes OPTISource 257821 User manual

®
LED light source for wavelength
850/1300/1310/1550
user manual
model no. 257821/257822/257823

• Introduction
• Features
• Key definition
• LED definition
• OPTISource specifications
• Instructions for operation

The OPTISouce is a high performance
stabilized source that is widely used in fiber
network installation and maintenance. Hobbes
offers 3 models for the Laser source series:
850/1300 for multimode, 1310/1550 for
single-mode optical fibers, and an “all in one”
model for all 4 wavelengths. Hobbes
OPTISource series represents advance
technology with high performance in fiber loss
measurement, fiber attenuation measurement,
and fiber cable identification by using
modulated light source.
Features
• Four wavelength 3 model combinations
* 850/1300 multimode
* 1310/1550 single mode
* 850/1300/1310/1550 “all in one”
• C.W. and 1KHz, 2KHz, 270Hz
modulated signals
• Auto-identify wavelength indicator
(Full compatibility with Hobbes Optical
Power Meter to be use as a complete set)

,

0.15dB/8hr@1310/1550nm;
0.25dB/8hr@850/1300nm
nm

nm.

Optical Fiber Source is classified as a CLASS
1 LASER product
But it is highly recommended avoiding exposure to eyes.
This device is used for its intended purposes only, any
use of this product other than its intended purpose, may
or can cause severe harm. Use Cautiously.
Warning:
Keep the device safely stored and keep the device
away from children!! Uses Class 1 Laser Radiation.
DO NOT LOOK DIRECTLY INTO THE LASER BEAM!

®