Hobby-Lobby HG-80001-75CLED User manual

SKU# 5556162
Vendor Item No.: HG-80001-75CLED –2021 TREE LETTER "E" Made in China
ASSEMBLY INSTRUCTIONS
1. Before you start to assemble your tree, choose a location on a stable surface near a wall outlet.
2. Remove the tree stand from plastic bag and separate the legs of the stand to form an “X”. Align the holes for the insertion
of the screws, insert the screws and begin threading in a clockwise direction for a couple of rotations only; leave enough
room for the tree pole from section C to be inserted in the assembled tree stand.
3. Carefully insert the bottom section C of the tree into the assembled stand. Make sure the pole is firmly inserted into stand
and screws are tightened.
4. Identify the tree middle section B and place the end of pole into the tree bottom section C.
5. Identify the tree top section A and place the end of pole into tree middle section B.
6. Connect the lights between each tree section following the markings.
7. Allow branches to fall into place. When adjusting branches be sure that all wires are free of branch hinges.
8. Plug the power adaptor into the wall outlet. This tree includes a 8 functions (1. Combination 2. In waves 3. Sequential 4.
Slow-glow 5. Chasing / Flash 6. Slow Fade 7. Twinkle / Flash 8. Steady On) control box.
9. Keep tree plugged in while shaping your tree.
10. Begin to shape the branches working from the bottom to the top. Separate the side stems from the main branch by gently
pulling them to two sides to form a “V” shape.
11. Gently pull down the needles on the tree top section A to achieve your desired tree shape.
12. Your tree is now ready to be decorated and enjoyed.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This tree includes a 8-functions (1. Combination 2. In waves 3. Sequential 4. Slow-glow
5. Chasing / Flash 6. Slow Fade 7. Twinkle / Flash 8. Steady On) control box. The whole
tree will be lit after switched on

SKU# 5556162
Vendor Item No.: HG-80001-75CLED –2021 TREE LETTER "E" Made in China
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations.
2. Unplug each section of light sets between the tree top, middle section, bottom section, and from the wall outlet.
3. Remove the tree top section A from the middle section B, and then remove the middle section B from the bottom section C.
Then, remove the bottom section C from the tree stand. Remove the screws and collapse the tree stand.
4. Carefully replace the tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA WHERE THE TEMPERATURE
EXCEEDS 25 °C or 77 °F.
USE AND MAINTENANCE INSTRUCTIONS
1. Before using or reusing, please inspect product carefully. Do not use if the product has cut, damaged, or frayed wire, or
enclosures, loose connections or exposed copper wire.
2. If you find a loose branch, it is possibly due to a loose hinge pin. Spare hinge pins are included in the bag containing this
instruction manual. Place the loose branch into the slot of the metal bracket, insert a new hinge pin through the holes and
secure using a pliers(not included).
3. When not in use, store neatly in a cool, dry location protected from sunlight.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed, including the following.
1.READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Do not connect other electrical items or timer with the power adaptor. The tree will malfunction if the power adaptor is
not plugged directly to the wall outlet or extension cord.
3. Do not use seasonal products outdoors.
4. This seasonal use product is not intended for permanent installation or use.
5. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
6. Do not secure the wiring of product with staples or nails, or place on sharp hooks or nails.
7. Do not let lamps rest on the supply cord or on any wire.
8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played
with or placed where small children can reach it.
10. Do not use this product for other than its intended use.
11. Do not hang ornaments or other objects from cord, wire or light string.
12. Do not close doors or windows on the product as this may damage the wire insulation.
13. Do not cover the product with cloth, paper or any material not part of the product when in use.
14. This product is equipped with starry micro LED lamps. Do not twist lamps.
15. Read and follow all instructions that are on the product or provided with the product.
16. SAVE THESE INSTRUCTIONS
Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com