Hobby-Lobby LC46MMS90H2DHLL User manual

SKU# 5340427
MODEL #: LC46MMS90H2DHLL –2021 TREE LETTER "W" Made in Cambodia
ASSEMBLY INSTRUCTIONS
1. Before you start to assemble your tree, choose a location on a stable surface near a wall outlet.
2. Remove the tree stand from plastic bag and separate the legs of the stand to form an “X”. Align the holes for the
insertion of the screws, insert the screws and begin threading in a clockwise direction for a couple of rotations only; leave
enough room for the tree pole from section D to be inserted in the assembled tree stand.
3. Carefully insert the bottom section D of the tree into the assembled stand. Make sure the pole is firmly inserted into
stand and screws are tightened.
4. Identify the tree section C and place the end of pole into the tree bottom section D.
5. Identify the tree section B and place the end of pole into the tree section C.
6. Identify the tree top section A and place the end of pole into tree section B.
7. Connect the lights between each tree section following the markings.
8. Plug the power adaptor into the wall outlet.
9. The tree should now be lit. If some bulbs do not light, search for any loose connections, broken, or missing bulbs.
10. This tree is a "Self-Shaped Tree" made with memory wire. Memory Wire remembers its shape, and the branch tips
instantly spring into place. Gently pull down the needles on tree top.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.

SKU# 5340427
MODEL #: LC46MMS90H2DHLL –2021 TREE LETTER "W" Made in Cambodia
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations.
2. Unplug each section of light sets between the tree top section A, section B, section C, bottom section D, and from the wall
outlet.
3. Remove the tree top section A from section B, remove section B from section C, remove section C from section D, and
remove section D from the tree stand. Remove screws and collapse the tree stand.
4. Carefully replace the tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA WHERE THE TEMPERATURE
EXCEEDS 25 °C or 77 °F.
USE AND MAINTENANCE INSTRUCTIONS
1. Before using or reusing, please inspect product carefully. Do not use if the product has cut, damaged, or frayed wire,
insulation or cords, cracks in the lamp holders or enclosures, loose connections or exposed copper wire.
2. If you find a loose branch, it is possibly due to a loose hinge pin. Spare hinge pins are included in the bag containing this
instruction manual. Place the loose branch into the slot of the metal bracket, insert a new hinge pin through the holes and
secure using a pliers(not included).
3. If you find a section that does not light, starting with the first unlit bulbs, gently push (don’t twist) each bulb firmly into the
socket. At the same time, look for a broken bulb in the socket or an empty socket where a bulb has fallen out. Remember
to unplug the tree before replacing any bulbs.
4. If a bulb is broken or unlit, mark it with a piece of tape and unplug the tree before removing the bulb and any fragments.
Replace the broken or unlit bulb.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
BULB REPLACEMENT INSTRUCTIONS
1. Lift up by unsnapping the locking tab (if present). Then pull bulb and plastic holder straight out of socket.
2. Replace bulb with only 3 Volt 0.06 Watt LED type lamp.
3. Spare bulbs are provided with the product and are located inside the bag containing this instruction manual.

SKU# 5340427
MODEL #: LC46MMS90H2DHLL –2021 TREE LETTER "W" Made in Cambodia
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed, including the following.
1.READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Do not connect other electrical items or timer with the power adaptor. The tree will malfunction if the power adaptor is
not plugged directly to the wall outlet or extension cord.
3. Do not use seasonal products outdoors.
4. This seasonal use product is not intended for permanent installation or use.
5. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
6. Do not secure the wiring of product with staples or nails, or place on sharp hooks or nails.
7. Do not let lamps rest on the supply cord or on any wire.
8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played
with or placed where small children can reach it.
10. Do not use this product for other than its intended use.
11. Do not hang ornaments or other objects from cord, wire or light string.
12. Do not close doors or windows on the product as this may damage the wire insulation.
13. Do not cover the product with cloth, paper or any material not part of the product when in use.
14. This product is equipped with push-in type lamps. Do not twist lamps.
15. Read and follow all instructions that are on the product or provided with the product.
16. SAVE THESE INSTRUCTIONS
Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com