Hobby-Lobby KC03AMSXTS75DH2 User manual

SKU# 5344239
MODEL #: KC03AMSXTS75DH2 – 2021 TREE LETTER "J" Made in Cambodia
SINGLE PLUG POWER CONNECT®
POLE TO POLE ELECTRICAL CONNECTION® TECHNOLOGY
ASSEMBLY INSTRUCTIONS
1. Before you start to assemble your tree, choose a location on a stable surface near a wall outlet.
2. Remove the tree stand from plastic bag and separate the legs of the stand to form an “X”. Align the holes for the insertion
of the screws, insert the screws and begin threading in a clockwise direction for a couple of rotations only; leave enough room
for the tree pole from section C to be inserted in the assembled tree stand (Diagram A).
3. Identify the tree bottom section C and place the end of pole into the assembled stand. Make sure the pole is firmly inserted
into stand and screws tightened.
4. Plug the adaptor into the power supply. This tree includes a 3 functions foot pedal controller. Please step once on the foot
pedal and the lights will come on, and step twice the mini lights will turn to random twinkle.
5. Identify the tree middle section B and place the end of pole into the tree bottom section C. Allow branches to fall into place.
With the POLE TO POLE ELECTRICAL CONNECTION® technology, tree middle section B should now be lit (Diagram C).
6. Insert the tree top A into the tree middle section B. With the POLE TO POLE ELECTRICAL CONNECTION® technology, tree top
A should now be lit (Diagram B).
7. "Self-Shaped Tree" made with memory wire remembers its shape, and the branch tips instantly spring into place. Gently pull
down the needles on tree top.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This tree includes a 3-functions (ON/TWINKLE/OFF) foot pedal controller.
The whole tree will be lit after switched on

SKU# 5344239
MODEL #: KC03AMSXTS75DH2 – 2021 TREE LETTER "J" Made in Cambodia
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations.
2. Unplug from power supply.
3. Remove the tree top from the middle section, remove the middle section from the bottom section, and remove the bottom
section from the tree stand. Remove screws and collapse the tree stand.
4. Carefully replace the tree in its box and tape it shut. DO NOT STORE TREE IN A DAMP AREA WHERE THE TEMPERATURE
EXCEEDS 25 °C or 77 °F.
USE AND MAINTENANCE INSTRUCTIONS
1. Before using or reusing, please inspect product carefully. Do not use if the product has cut, damaged, or frayed wire,
insulation or cords, cracks in the lamp holders or enclosures, loose connections or exposed copper wire.
2. If you find a loose branch, it is possibly due to a loose hinge pin. Spare hinge pins are included in the bag containing this
instruction manual. Place the loose branch into the slot of the metal bracket, insert a new hinge pin through the holes and
secure using a pliers(not included).
3. If you find a section that does not light, starting with the first unlit bulbs, gently push (don’t twist) each bulb firmly into the
socket. At the same time, look for a broken bulb in the socket or an empty socket where a bulb has fallen out.
4. If a bulb is broken, mark it with a piece of tape and unplug the tree before removing the bulb and any fragments. Replace
the broken bulb.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
BULB REPLACEMENT INSTRUCTIONS
1. Lift up by unsnapping the locking tab (if present). Then pull bulb and plastic holder straight out of socket.
2. Replace bulb with only 3 Volt 0.06 Watt LED type lamp.
3. Spare bulbs are provided with the product and are located inside the bag containing this instruction manual.
4. 1 faulty bulb will result in 10 bulbs unlit. If this happens, replace each bulb with the spare bulbs that are provided until the
faulty bulb is found.

SKU# 5344239
MODEL #: KC03AMSXTS75DH2 – 2021 TREE LETTER "J" Made in Cambodia
5. Please note that spare bulbs are suitable for both the C6 olive shaped bulbs and the mini incandescent shaped bulbs. Refer
to below instruction on how to replace the C6 olive shaped bulbs.

SKU# 5344239
MODEL #: KC03AMSXTS75DH2 – 2021 TREE LETTER "J" Made in Cambodia
TROUBLE SHOOTING TIPS - IF TREE DOES NOT ILLUMINATE
1. Please ensure the adaptor is properly plugged into the power outlet and the connection between cable and adaptor is fully
secured as per the below diagram.
.
2. Ensure the foot pedal has been switched to the "ON" function.
3. If all procedures listed above do not solve the problem, please check the lights connections within the unlit tree sections to
ensure the light strings are well connected with the plastic ring tightly screwed as per the below diagram.

SKU# 5344239
MODEL #: KC03AMSXTS75DH2 – 2021 TREE LETTER "J" Made in Cambodia
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed, including the following.
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Do not connect other electrical items or timer with the power adaptor. The tree will malfunction if the power adaptor is
not plugged directly to the wall outlet or extension cord.
3. Do not use seasonal products outdoors.
4. This seasonal use product is not intended for permanent installation or use.
5. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
6. Do not secure the wiring of product with staples or nails, or place on sharp hooks or nails.
7. Do not let lamps rest on the supply cord or on any wire.
8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played
with or placed where small children can reach it.
10. Do not use this product for other than its intended use.
11. Do not hang ornaments or other objects from cord, wire or light string.
12. Do not close doors or windows on the product as this may damage the wire insulation.
13. Do not cover the product with cloth, paper or any material not part of the product when in use.
14. This product is equipped with push-in type lamps. Do not twist lamps.
15. Read and follow all instructions that are on the product or provided with the product.
16. SAVE THESE INSTRUCTIONS
Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com