4 | Rod Holder Features
Un-thread the red knob
1
Pull the reel holder out, rotate
into the desired position and press
back into the rod base.
2
Thread the red knob to secure the
reel holder.
3
Gimble Pin
The adjustable rod holder assembly
comes with a gimble pin installed at
the base. You can remove the pin with
a flat head screwdriver if you do not
want to use this feature.
Reel Holder
The reel holder at the top can be
removed to allow for different styles of
reels and angles of trolling. To adjust
the reel holder:
