Hohem XG1 User manual

Product Overview
XG1 Quick Start Guideline V1.0
Accessories List
Quick Installation
GoPro Hero 5
The lens next to
the tilt motor
*No need additional counter weight.Without power on, the gimbal can get the best self-balance status by setting the right position of
the motors and camera placements.
GoPro Hero 3/4/YI CAM/
SJCAM Or other action camera
of similar size
(The lens is opposite to
the tilt motor)
Put the tilt motor to the RIGHT side, place GoPro Hero5
closely to the back clip as picture and tighten the knob to
secure its position. Double tighten by the 2 long screws
against violent movement.
Place GoPro 4/3/YI/SJCAM etc. closely to the clip as
picture show and tighten the knob to secure its
position.Double tighten by the 2 long screws against
violent movement.
Roll Axis
Tilt Axis
Panning 320
Tilting 320
Rolling 320
Web www.hohem-tech.com
Email [e-mail]
Tel [phone] Copyright: Hohem Technology Co., Ltd.
Stabilizer*1 Handbag*1 USB Cable*1

Use
Instruction
Charging
Being Charged through USB directly, a gimbal would work constantly without time
limits. If indication light flash quickly, it warns that gimbal power is running out soon
and would enter into lower power protection status
Firmware Upgrate/ Calibration
To make firmware upgrading or calibration by connecting with PC.
Operating Instructions
Function Button
Power on/off
USB Cable
USB Port
APP Connecting Instruction
Support iOS system 8.0 or above and Android system 4.4 or above
Please scan the QR
code to get more
products enquiries
(1) Scan the QR code and download APP
“Hohem Gimset” in APP Store or Google Play
(2)Launch the Bluetooth on the smartphone
Choose the correct model
Confirm the Bluetooth
is connected. The Bluetooth
light will constant on
Please scan the QR
code to get more
functions
introduction
Connect the device