Holman SWC2000 User manual
2 of 20
PRODUCT CODE: SWC2000
iOS is a trademark of Apple Inc. Android is a trademark of Google LLC. The
Android robot is reproduced or modified from work created and shared by
Google and used according to terms described in the Creative Commons 3.0
Attribution License. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Holman
Industries is under license. Other trademarks and trade names are those of their
respective owners. All other content is Copyright©HolmanIndustries2022.
Scan here for the latest manual
or visit
https://www.holmanindustries.com.au/product/
140mm-smart-flood-light-twin-pack
4 of 20
Overview
Package Content
1. 2 × 6W Bluetooth Mesh Flood Lights [a] IP65
2. 2 × Ground Spikes [b]
3. 2 × Hardware for wall mounting
4. Plug in Power Supply [c], for outdoor power point (GPO),
DC Adaptor [d] IP67, 90cm from plug to DC Adaptor, 3m from
DC Adaptor to the first light
b
d
ca
ÁNo modification or addition
to the light configuration is possible
5 of 20
Setup
Preparation
1. Ensure that the power point
is no more than 3m away,
there is no extension or
modification for the cable
2. If the ground spikes are
being used, these can be
attached by hand without
tools, use the swivel
bracket to move the light
out of the way for this
3. If the lights are being
attached to the wall, mark
out their positions ensuring
that everything is within
the limits of the cable
4. Plug the Floodlights into their
cable, before connecting
ensure the red O-Ring [a]
is in place (for electrical
protection) and that the
plug is correctly oriented
5. Once the plugs are
connected screw down
the threaded cover onto
the plug connection
6. Plug in the power cord to
the power point (GPO) and
observe the lights, they
should be flashing white
(pairing mode). If the lights
are not flashing white,
turn the power point on/
off/on/off/on to get the
lights into pairing mode
a
6 of 20
Setup (continued)
Installing Holman Home
1. Download Holman Home to
your mobile device via the
App Store or
Google Play
2. Open Holman Home
on your mobile device
®You may be prompted to allow
notifications–the app can
still function if you choose to
opt out
3. Tap SIGN UP
4. Read our User Agreement
and Privacy Policy and tap
AGREE if you wish to proceed
5. Follow the prompts to register
a Holman Home account
with your email address
ÁEnsure your country
details are correct at this
stage
®You must allow the
‘Discovering Nearby
Device’ permission (or
Bluetooth®permission,
depending on your phone
operating system) – this
allows Bluetooth®mesh
products to be added into
Holman Home
®You may be prompted to
allow access to your location.
This allows the app to show
weather information-it will
still function if you choose to
opt out
7 of 207 of 20
Setup (continued)
Bluetooth®Connetion
LEnsure you and your
smartphone are close to your
light kit during the connection
process - you may need to
prompt pairing mode
LYour lighting kit will perform
preset schedules from the
app, even if your smartphone
is out of Bluetooth®
connection range (schedules
must be sent within Bluetooth
range)
8 of 20
Setup (continued)
Pairing
1. Pairing of the flood
lights is via Bluetooth®
Mesh, please ensure
you have allowed the
Bluetooth®(iOS)or
Nearby Devices (Android)
permission
2. These lights will flash
white/fast to indicate
they are ready to pair
(default/pairing mode)
3. Tap ‘Add Device’ from
the Holman Home Home
screen, you will see the
flood lights appear under
‘Discovering devices’
4. Press ‘Add’ to
commence pairing
5. When you see the blue
circle [a] appear on the
‘Add Device’ screen please
tap this (or ‘Add All’ [b])
to commence pairing
6. After 30 seconds to 1
minute the light will be
successfully added
a
b
9 of 20
Pairing (continued)
Setup (continued)
7. Tap ‘Done’ to complete
pairing. You will now see the
lights on the home page
If you are still within
Bluetooth®range you will
see a power on/off icon [c]
8. If you’re out of range, the
Bluetooth®[d] symbol
will appear greyed out
c
d
10 of 20
Key Functions
Dimmer
Functions
®Menu options at the bottom of the home screen
1. Dimmer - RGB/W mode, colour selection
2. Pallete - Scenes
3. Music
4. More – includes schedule
®Top left – light name (tap 3
dots to top right to change
this) [a]
®Switch [b] – toggle the light
on/off
®Colour or White selection [c] -
tap the word to move between
options
®Colour selection [d] – tap to
move the bulb icon between
colours (current colour is
displayed at the top right of
the screen as the light circle,
inside this is the colour name
®Brightness - slide your finger
along the bar to reduce
brightness
a
d
e
c
b
Table of contents
