Holmes 32510091 User manual

Instruction Manual
Item: 12096 / 12971
Model: 32510091
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
WARRANTY INFORMATION
© 2023 Sunbeam Products, Inc. All rights reserved.
HOLMES®is a registered trademark of Sunbeam Products, Inc. used under license.
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH022-111523
Printed In China
3 YEAR LIMITED WARRANTY
This device has a 3 Year limited warranty for the original purchaser from the date of purchase against workmanship and
defects in material. If under normal use, your product fails to operate, a replacement or refund will be provided to you
with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.
How to Obtain Warranty Service
If you have any problems, please do not contact the store.
Contact our customer service at:
www.getholmesfans.com
[email protected]
1-866-769-3166 (8:30 am - 5:00 pm EST) Monday - Friday
Our customer service will be happy to assist you.
覆膜上光油 上水油
DOCKET: KT-596
DATE: Nov 9, 2023
ITEM/SKU#: 12971
DESCRIPTION: 16in Outdoor Misting Fan
CUSTOMER/RETAILER: WMT
DESIGNER: RG
FILE TYPE
ALL ARTWORK, DESIGN &
CREATIVE ARE PROPERTY OF:
1175 PLACE DU FRÈRE-ANDRÉ
MONTRÉAL (QUÉBEC)
CANADA H3B 3X9
1 800 890 4076
PKG
PKG FINISHING
Varnish (oil, gloss by default)
NOTE:
Aqueous Coating Matte
Gloss
IM RL PDQ TRAY
COLOURS
PANTONE COLOR
DIMENSION
PHOTOS
ARTWORK IS THE PROPERTY OF L’IMAGE HOME PRODUCTS INC. Printers changing Pantone spot colors to
CMYK do so at their own risk and expense. Print artwork at 100% from PDF supplied, unless otherwise
specified. Proofs/samples must be sent for approval before mass printing.
DO NOT CHANGE ARTWORK IN ANY WAY.
BEFORE MASS PRODUCTION: ELECTRONIC PDF ARTWORK PROOF MUST
BE SENT TO L’IMAGE HOME PRODUCTS GRAPHICS DEPT FOR APPROVAL.
PROCESS COLOR
DIELINE
Spot-UV PP Lamination Other (See notes) High Res Photo
Matte
Gloss
HEIGHT: 19 cm
WIDTH: 42 cm
BLACK
CLEANING / MAINTENANCE
FAN CLEANING
• Always unplug the fan before cleaning.
• Do not allow water to drip on or into fan housing.
• Use only a soft cloth moistened with a mild soap
solution.
• Do not use harsh chemicals such as gasoline, thinner
or benzene as a cleaner.
FAN BLADE CLEANING
1. Always unplug the fan before cleaning
2. Remove the front grill by taking off the grill screw
and nut (W) located on the bottom of the grill.
3. Clean the fan blade, front and rear grills with a soft
cloth moistened with a mild soap solution.
4. Securely fasten the front grill to the rear grill by
replacing the grill screw and nut (W). Tighten with
screw driver. (Use Philips head screw driver).
FAN HEAD, BASE AND POLE CLEANING
Unplug the fan, then using a soft, moist cloth (with or
without a mild soap solution), carefully clean the fan base,
pole and head. Use CAUTION around the housing area. Do
not allow the motor or other electrical components to be
exposed to water.
FAN STORAGE
This fan can be stored either partially disassembled or
assembled.
• Store the fan in a clean, dry location between
seasons or when not in use for an extended period of
time.
• Keep the fan protected from dirt and dust during
storage.
For inquiries regarding recycling and proper disposal
of this product, please contact your local waste
management facility.
16 Inch
Outdoor Misting Fan
USER SERVICING INSTRUCTIONS
Follow these instructions to safely and correctly care for
this fan.
REPLACEABLE FUSE
If the (5 Amp, 125 Volt) replaceable fuse blows, please
contact customer service for information on how to order
a new fuse. Follow the below instructions to replace the
fuse on the plug.
1. Unplug the fan. Grasp plug and remove from the
receptacle or other outlet device. Do not unplug by
pulling on cord.
2. Locate the fuse holder on the power cord. Use
screwdriver to remove the fuse cover and take out the
O-ring (see Figure 4).
Note: Ensure that fuse
cover is completely open
before attempting to
remove fuse.
3. Remove fuse carefully by
using a small screwdriver
to pry the fuse out of
the compartment by the
metal ends of the fuse (see
Figure 4).
4. Place Fuse Box on a solid
flat surface. Insert new
5 Amp, 125 Volt fuse
into fuse compartment and use a small screwdriver
to secure the metal ends of the fuse into the
compartment.
Caution: Risk of fire. Replace fuse only with 5 Amp,
125 Volt fuse.
5. Replace the O-ring, close the fuse cover in place and
secure with the 2 screws (see Figure 4). If fuse cover
is difficult to close, make sure fuse is secured in place
completely by pressing down on metal ends of the
fuse.
CAUTION: Risk of Fire. Do not remove or replace the
Fuse Box. It contains a safety device (fuse). Discard
product if the fuse box is damaged.

A. Logo Plate / Adjustable Mist Knob
B. Misting Nozzles
C. Front Grill
D. Blade Cap
E. Fan Blade
F. Rear Grill Mounting Nut
G. Rear Grill
H. Motor Shaft
I. Motor Housing
J. Oscillation Knob
K. Speed Control Knob
L. Fan Post Screw
M. Extension Pole
N. Height Adjustment Collar
O. Outer Pole
P. Base
Q. Washer
R. T-shaped Locking Lever
S. Misting Hose
T. Misting Hose Connector
U. Power Cord
V. GFCI Plug
W. Grill Screw and Nut
X. Misting Hose Clip
Y. Fuse Holder
231
OPERATING INSTRUCTIONS (SEE FIGURE 1)
1. Set the fan on a dry and level surface.
2. Plug the cord into a GFCI protected 120V AC outlet.
3. The fan Speed Control Knob (K) is located on the back
of the Motor Housing (I). Select the fan speed:
0 - Off, 3 - High, 2 - Medium, 1 - Low.
4. To start oscillation, press the Oscillation Knob (J) down.
To stop oscillation, pull Oscillation Knob (J) up.
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions carefully before using this
appliance.
2. Use fan only for purposes described in the instruction
manual.
3. This fan is not intended for continuous operation or
equivalent.
4. To protect against electrical shock do not immerse unit,
plug or cord in water or spray with liquids and plug
the appliance directly into a 120V AC electrical outlet.
5. Not intended for use by children.
6. This is an outdoor fan and not intended for indoor use.
7. Unplug from outlet when not in use, when moving
fan from one location to another, before putting on or
taking off parts and before cleaning.
8. Avoid contact with moving parts.
9. Do not operate in the presence of explosive and/or
flammable fumes.
10. To avoid fire hazard, never place the cord under rugs
or any parts near an open flame, cooking or other
heating appliance.
11. Do not operate any appliance with a damaged cord
or plug, after the appliance malfunctions, or has been
dropped/damaged in any manner. Discard fan or
contact customer service.
12. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
13. The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
ASSEMBLY INSTRUCTIONS (SEE FIGURE 1)
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS OF THE
PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR
PARTS THAT COULD BE REQUIRED TO OPERATE THIS FAN.
Tools required: Phillips head screw driver (not included).
Estimated assembly time: 5–10 minutes
1. Insert the lower end of the Outer Pole (O) through
the hole in the center of Base (P) and twist clockwise
into position.
2. Insert the threaded end of the T-shaped Locking
Lever (R) into the hole of the Washer (Q) and
through the Base (P).
3. Turn the T-Shaped Locking Lever (R) clockwise to
securely attach the pole to the Base (P).
4. Set the Base (P) on the floor.
5. Loosen Fan Post Screw (L) and insert the Motor
Housing (I) over top of Extension Pole (M). Tighten
Fan Post Screw (L).
6. Line up the slots of the Rear Grill (G) with the
notches on the Motor Housing (I) assembly.
7. Secure rear grill to Motor Housing (I) assembly
with Rear Grill Mounting Nut (F). Turn clockwise
to tighten.
8. Slide Fan Blade (E) over Motor Shaft (H).
9. Secure Fan Blade (E) to Motor Shaft (H) with the
Blade Cap (D). Turn counter-clockwise to tighten.
10. Remove the Grill Screw and Nut (W) located on the
bottom of the Front Grill (H).
11. Slide the Front Grill (H) over the Rear Grill (G).
12. Replace Grill Screw and Nut (H) and tighten with
screw driver. (Use Philips head screw driver)
13. Attach the misting Misting Hose Clip (X) onto the
Outer Pole (O) (see Figure 1).
Figure 1
A
B
C
W
D
E
F
G
HIJ
K
M
U
Y
V
S
N
X
O
Q
R
P
T
L
Figure 2
Figure 3 Nozzles
Close-up of Adjustable Mist Knob
GFCI (Ground Fault Circuit Interrupter) SAFETY DEVICE: This device provides protection against electric shock due to
ground fault currents by automatically shutting off the power. To test the operation of the GFCI Safety Device, switch
the fan ON. Press the TEST button on the GFCI device attached to the plug end of the line cord. The fan should stop
operating and the Power indicator should be extinguished. Press the RESET button on the GFCI device to resume
normal operation of the fan. This devise should not be used as an ON/OFF operation switch.
CAUTION: ALTHOUGH THIS DEVICE IS PROVIDED WITH PROTECTION WHICH REDUCES THE RISK
OF ELECTRIC SHOCK, THIS PRODUCT SHOULD NEVER BE USED CARELESSLY NEAR WATER.
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS
PARTS AND ASSEMBLY FEATURES - OPERATIONS
TILT ADJUSTMENT
Gently move the fan head up or down manually to the
desired angle.
HEIGHT ADJUSTMENT
Follow these instructions to adjust the height of the fan.
STEP 1: Turn the Height Adjustment Collar (N)
counter-clockwise to loosen pole.
STEP 2: Adjust the Extension Pole (M) to the desired
height, then turn Height Adjustment Collar (N) clockwise
to tighten.
MISTING INSTRUCTIONS
1. Ensure the fan Speed Control Knob (K) is in the OFF
(0) position.
2. Slide the Valve Switch to the left (See Figure 2).
3. Attach the end of the Misting Hose Connector (T) to
a standard garden hose and turn on the water.
4. Turn the Adjustable Mist Knob (A) (see Figure 3) on
front grill to open the desired number of nozzles for
misting (2-3-1).
5. Open the Switch Valve on the Misting Hose Connec-
tor (T) by turning it to the right.
14. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
15. To disconnect, grip plug and pull from wall outlet. Never
yank on cord.
16. Always use on a dry, level surface.
17. Do not operate fan until fully assembled with all parts
properly in place.
18. This product is intended for household use only and not
for commercial or industrial applications.
19. WARNING: To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
20. WARNING: To reduce the risk of fire, electric shock or
injury to persons, do not use replacement parts that
have not been recommended by the manufacturer
(e.g. parts made at home using a 3D printer).
21. This fan employs an overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from the outlet.
Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a
short circuit may be present and the product should be
discarded or contact customer service.
Misting
Hose
Connector
Misting
Hose
Valve
Switch