Home Accents Holiday 21RT1822111 User manual

OMS THD SKU # 1006 184 681
Model # 21RT1822111
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 84in LED 2D Christmas Green Tree. We strive
to continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home improvement
needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
84in LED 2D Christmas Green Tree
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center or return
to the place of purchase with purchase receipt.1-877-527-0313
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts (0.1
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor, ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday 1-877-527-0313
Diagram of Parts
Parts List
Locater Name Qty.
A Upper Section 1
B Middle Section 1
C Lower Section 1
D Stabilizing Bar 1
E Base Stand 1
E1 Holly Berry 1
Hardware List
Locater Name Qty.
F Spare Fuse 6
G Spare Bulb 12
H Plastic Tie 10
I Bolt & Wingnut 6
J Anchoring String 4
K Ground Stake 8
L Cotter Pin 2
A
H
C
E
B
G
I
F
D
J
L
K
E1

A
SSEMBLY
1 Assembling the Base Stand to the Lower Section
Insert the connecting rods on the Base Stand (E) into the connecting
holes on the bottom of the Lower Section (C) then secure together at
the connecting loops with the Bolt & Wingnuts (I).
2 Assembling the Stabilizing Bar to the Lower Section
Insert the connecting rods on the Stabilizing Bar (D) into the matching
connecting holes on the lower section (C) and the Base Stand (E) then
secure together with the Cotter Pins (L).
3 Assembling the Middle Section to Lower Section
Plug the lighting power cord from the Middle Section with the Lower
Section. Insert the connecting rods on the bottom of the Middle Section
(B) into the connecting holes on the top of the Lower Section (C) then
secure together at the connecting loops with the Bolt & Wingnuts (I).
4 Assembling the Upper Section to Middle Section
Plug the lighting power cord from the Upper Section with the Middle Section.
Insert the connecting rods on the bottom of the Upper Section (A) into the
connecting holes on the top of the Middle Section (B) then secure together
at the connecting loops with the Bolt & Wingnuts (I).
5 Assembling the Holly Berry & Ground Stakes
Insert the wire on the backside of the Holly Berry (E1) through the
material on the Upper Section of Tree (A) then twist the wire together
to secure. Insert the Ground Stakes (K) over the metal frame of the
Base Stand (C ) at each corner then into the ground firmly.
6 Attach the Anchoring Strings and Ground Stakes
Hook the plastic clipped end of each ofAnchoring String (J) onto the metal
loops on top of the Upper Section (A). Attach the Ground Stakes (K)
thru the looped free end of eachAnchoring String (J) then tightly secure
to the ground evenly away from the Tree at four corners as shown below.
E
I
C
D
E
C L
B
C
I I
A
B
K
E1
A
K
J
C
A