Home Accents Holiday 21RT5182125CS User manual

THD SKU# 1006 128 652
Model # 21RT5182125CS
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 7ft Halloween Classics LED Willow Tree. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
7ft Halloween Classics LED Willow Tree
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground or a flat
surface. Many parts are connected by the lighting string that runs throughout the
item. Take special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package against
the parts list. It is recommended to assemble parts of the product while laying flat on
the ground versus standing the item up to assemble the parts. If any parts are
missing or damaged do not attempt assembly but contact our customer service
center or return the product to place of purchase with receipt.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on the cord.
CAUTION:The lighting string on this product is rated at 16.8 Watts (0.14
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the product taking caution not to cut any electrical wires.
c. Wipe the product with a damp cloth and allow to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
products that have been subjected to unauthorized repair and/or modification and damage
caused by shipping and improper handling, alterations, misuse, in store display models or
accidents. Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
Diagram of Parts
Parts List
A Lower Section 1
B Middle Section 1
C Upper Section 1
D Light String &
Branches 8
E Base Stand 1
Hardware List
F Bolt & WingNut 5
G Ground Stake 4
H Plastic Tie 25
D
C
H
B
A
F G
E

A
SSEMBLY
1 Assembling the Lower Section to the Base Stand
Insert the connecting rods on the bottom of the Lower Section (A) into
the connecting holes on the middle of the Base Stand (E) then fasten
together at the connecting loops with the Bolt & WingNut (F).
2 Assembling the Middle Section to the Lower Section
Insert the connecting rods on the bottom of the Middle Section (B) into the
connecting holes on the top of the Lower Section (A) then fasten together
at the connecting loops with the Bolt & WingNuts (F).
3 Assembling the Upper Section to the Middle Section
Insert the connecting rods on the bottom of the Upper Section (C) into
the connecting holes on the top of the Middle Section (B) then fasten
together at the connecting loops with the Bolt & WingNuts (F).
4 Assembling the Light String & Branches
Insert the connecting rod at the end of each of the Lighting String &
Branches (D) into the connecting holes on the Upper Section of the Tree (C).
Note: It is recommended not to unravel the Light String & Branches until all
Branches are inserted into the Upper Section and plugged in.
5 Connecting the Light Strings
Connect the Lighting String and Branches (D) by inserting the connecting
pins on the end of the lighting string on branches into the receptacle holes
on the light cords attached to the Upper Section. Then press together
tightly for a secure fit.
6 Assembling the Branches
Unravel the Branches and let them fall naturally downward. Use the
diagram of the finished Tree on this Assembly Sheet as a reference to
best place the Branches on the Tree.
7 Assembling the Power Plug
Push two pins of lighting set near the base of the Tree into the end of
adaptor then screw down tightly until secure.
8 Assembling the Ground Stakes
Insert Ground Stakes (G) over the metal frame at 4 corners of the Base
Stand (E) (per diagram below) then firmly into the ground.
F
A
E
F
B
A
C
B
F
C
D
D
D
D
E
G