Home Accents Holiday TY069-1213 User manual

USEAND CARE GUIDE
4 ft LED Lighted Wire Reindeer
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this 4 ft LED Lighted Wire Reindeer. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This
product is covered by a 90 day limited guarantee due to defects in material and workmanship.
Return the product with purchase receipt to the location of purchase for refund within 90 days
of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDs, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
SKU # 1001788254
YOW SKU # 724 762
Model # TY069-1213
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return to store. Assembly of this product may
require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Antlers/Ears 2
B Head/Neck 1
C Body 1
D Front Legs 1
E Tail 1
Package Contents/Parts List
Part Description Quantity
F Bolt & Nut 1
G Ground Stakes 4
H Plastic Ties 5
I Fuse 1
J Replacement Bulbs 3
A
D
C
B
E
G.
H. I. J.
F.

Assembly
Assembling the Deer
Step 1. Unfold the hind legs from the Body (C) and insert the hook, located on the inside rear
of the body, into the corresponding hole at the top of one hind leg, repeat with the other hind
leg. Fig.1
Step 2. Insert the Tail (E) into the rear of the Body Section. Fig.1
Step 1.Hook and align the Front legs(D) with the bottom of the front of the Body then fasten them
together with the Bolt & Nut (F).Fig.2
Step 2. There are a pair of hooks on the back of the Head/Neck (B). Hang the hooks onto the front
of the Body so it supports the Head/Neck. Fig.2
Step 3. Insert the two metal rods in the bottom of the Antlers/Ears (A) into the holes on top of the
Head (B) and Secure with the Plastic ties (H). Fig.2
Step 4. Secure the Deer to the ground with the Ground Stakes (G). Fig.2
Fig. 1
Fig. 2
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 7.2 Watts
(0.06Amps). Do not overload. Do not connect to other lighting strings, decorative
outfit or other electrical products. Before you use or re-use this product inspect it
carefully. Return to Store or discard if the product has cuts, damage or frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product, wire and lighting connections. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE