Home Accents Holiday TY156-1624-1 User manual

USEAND CARE GUIDE
SET OF 3 TINSEL WITCHES
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase
of this SET OF 3 TINSEL WITCHES. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intend for residential seasonal use for approximately 90 days per year. This product
is covered by a 90 days limited guarantee due to defects in material and workmanship. Return the
product with purchase receipts to the location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS, batteries,
products that have been subjected to unauthorized repair and/or modification and damage caused
by shipping and improper handling, alterations, misuse or accidents. Questions, problems, missing
parts? Before returning to the store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
YOW SKU # 721 099
Model # TY156-1624-1
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. If
any parts are missing or damaged do not attempt assembly. Many parts are
connected together by the lighting string. Please handle with care. Contact our
customer service center or return to place of purchase with proof of purchase
receipt. Assembly of this product may require more than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Hats 3
B Upper Bodies of
Witches 3
C Lower Bodies of
Witches 3
D Arms / Hands 6
E Cauldron 1
F Stirring Stick 1
Package Contents/Parts List
Part Description Quantity
G Support Pole
and Base 3
H Ground Stakes 16
I Plastic Tie 30
J Spare Fuse 3
K Spare Bulb 12
L Cotter Pin 3
C
B
B
A
D
E
F
G
JK
H I L

Assembly
Assembling the Tinsel Witches
Step 1. There are 3 Witches Bodies. Lay the Bodies out on the floor to match up the correct Body
Halves before you proceed. Insert the rods of the Upper Body of Witch (B) into the matching holes
on the Lower Body of Witch (C) for the three different Witch Bodies then fasten together with the
Plastic Ties (I). Stack and lock the narrow end of the Support Pole (G) into the " T " shaped Base (G).
Stand the assembled Witches then insert the top bent end of the Supporting Pole and Base into the
matching hole on the back of Body of Witches. Fasten with the Cotter Pin (L). (FIG.1)
Step 2. Stand the Cauldron up and attached the short Support Pole and Base to the back side of
Cauldron. Use the Cotter Pin to secure the Support Pole to the Cauldron. (FIG.3)
Step 3. Place the Hats (A) into matches holes on the head of each Witch (FIG.2) and insert the
Arms/Hands (D) into the matching holes on each Witch's body (following the diagram for the correct
Witch Body) then fasten them together with the Plastic Ties (I). (FIG.3)
Step 4. Insert the Stirring Stick (F) into the matching holes on the Hand of the hunched over Witch and
the top inside of Cauldron then fasten them together with the Nylon Ties (I). (FIG.3)
Step 5. Insert Ground Stakes (H) into the ground securing the base of each Witch and the
Cauldron. (FIG.3)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 28.8 Watts
(0.24Amps) and 40.8 Watts (0.34Amps). Do not overload. Do not connect to another
lighting string, decorative outfit or other product. Before you use or re-use this product
inspect it carefully. Return the product to place of purchase with receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.1 FIG.2
FIG.3