
2
Table of Contents
Safety Information .................................. 2
Pre-Assembly ...................................... 3
Planning Assembly................................. 3
Package Contents ................................. 3
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control Operations ........................... 6
Care and Cleaning .................................. 7
Troubleshooting .................................... 7
Warranty .......................................... 7
Safety Information
WARNING: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
CAUTION: To reduce the risk of electric shock, do not attempt
to replace lamps or modify string.
CAUTION:
• Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal.
• Do not mount or support strings in a manner that can cut or
damage wire insulation.
CAUTION:
by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC Responsible Party: The Home Depot
2455 Paces Ferry Road
Atlanta, Georgia
1-855-HD-HOLIDAY
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including
the following:
1. READ AND FOLLOW ALL SAFETY
INSTRUCTIONS.
2. Do not use seasonal products outdoors unless marked suitable for indoor and
outdoor use. When products are used in outdoor applications, connect the product to
a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
3. This seasonal use product is not intended for permanent installation or use.
4. Do not mount or place near gas or electric heaters, fireplaces, candles or other
similar sources of heat.
5. Do not secure the wiring of the product with staples or nails, or place on sharp
hooks or nails.
6. Do not let lamps rest on the supply cord or on any wire.
7. Unplug the product when leaving the house, or when retiring for the night, or if left
unattended.
8. This is an electric product – not a toy! To avoid risk of fire, burns, personal injury
and electric shock it should not be played with or placed where small children can
reach it.
9. Do not use this product for other than its intended use.
10. Do not hang ornaments or other objects from cord, wire, or light string.
11. Do not cover the product with cloth, paper or any material not part of the product
when in use.
12. Do not close doors or windows on the product or extension cords as this may
damage the wire insulation.
13. Read and follow all instructions that are on the product or provided with the
product.
14. SAVE THESE INSTRUCTIONS.
Use and care instructions
a) When the product is placed on a live tree, the tree should be well maintained and
fresh. Do not place on live trees in which the needles are brown or break off easily.
Keep the live tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
c) Before using or reusing, inspect product carefully. Discard any products that have
cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed,
including trees, branches, or bushes, to avoid any undue strain or stress on the
product conductors, connections, and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
CAUTION
1. To reduce the risk of electric shock, do not attempt to replace lamps or modify
string.
2. To reduce the risk of fire and electric shock:
a) Do not install on trees having needles, leaves or branch coverings of metal or
materials which look like metal, and
b) Do not mount or support strings in a manner that can cut or damage wire insulation
Model #22KY10004
ETL Model #JY-CNT0355-15