Home Accents Holiday TY337-1611-1 User manual

OMS THD SKU# 1001 767 245
Model # TY337-1611-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 62in 160 Light LED TINSEL PENGUINS with TREE.
We strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home decoration
needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
62in 160 Light LED TINSEL PENGUINS with
TREE
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts (0.08
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Hat 1
B Small Penguin Head 1
C Small Penguin Arm 2
D Small Penguin Body/Feet 1
E Big Penguin Ear Muff 1
F Big Penguin Head 1
G Big Penguin Body Halves 2
H Big Penguin Arm 2
I Star with lighting string 1
J Big Penguin Feet 2
K Upper Section of Tree 1
L Lower Section of Tree 1
M Base Stand 1
N Scarf 2
O Cotter Pin 1
Hardware List
Locater Name Qty.
P Ground Stake 6
Q Plastic Tie 15
R Spare Fuse 2
S Spare Bulb 4
P Q R S
AB
C
D
F
E
G
H
O
K I N
M
J L

A
SSEMBLY
1. Assembling the Lower Section to Base Stand
Insert the connecting rods on the Base Stand (M) into the connecting
holes on the Lower Section of Tree and lock with the Cotter Pin (O).
2 Assembling the Upper & Lower Sections of Tree
Insert the connecting rods on the bottom of the Upper Section of Tree (K)
into the matching holes on the top of the Lower Section of Tree (L). Fasten
the two Sections of Tree with Plastic Ties (Q). Attach the Star with Lighting
String (I) to the top of the Upper Section of Tree (K).
3. Assembling the Big Penguin
Align the connecting rods on the Big Penguin Body Halves (G) with each
other and insert the connecting rods on one half into the connecting
holes on the other half then fasten with Plastic Ties (Q). Insert the
connecting rods on the Big Penguin's Feet (J) into the holes at the
bottom of the Big Penguin's Body and fasten them with Plastic Ties (Q).
4. Assembling the Arms and Head to the Big Penguin
Insert the connecting rods on the Big Penguin's Arms (H) into the matching
holes on the Big Penguin's Body (G). Insert the connecting rods on the Big
Penguin's Head (F) into the holes on the top of the Big Penguin's Body and
fasten them with Plastic Tie (Q).
5. Assembling the Ear Muff to the Big Penguin
Insert the connecting rods on the Big Penguin's Ear Muff (E) into the
holes on the Big Penguin's Head and fasten them with Plastic Tie (Q).
6 Assembling the Arms and Head to the Small Penguin
Insert the connecting rods on the Small Penguin's Head (B) and Small
Penguin's Arms (C ) into the matching holes on the Small Penguin's
Body/Feet (D) and fasten all parts together with Plastic Tie (Q).
7 Assembling the Hat to the Small Penguin
Insert the connecting rods on the Hat (A) into the holes of the Small
Penguin's Head (B).
8 Assembling the Small Penguin to the Big Penguin
Insert the connecting rods at the bottom of the Small Penguin's Body/Feet
(D) into the matching holes on the Big Penguin's Arms. Insert the
connecting rods on the front of the Small Penguin's Body (D) into the
matching holes on the right side of the Upper Section of Tree (K).
9. Attaching the Scarfs, Unwind Lighting String & Secure to Ground
Wrap the Scarfs (N) around the necks of both Penguins. Unwind the
Lighting String (I) around the Tree evenly. Secure the Big Penguin and
the Tree to the ground with the Ground Stakes (P).