Home Zone Security ES06470V User manual

Battery Operated Motion Sensor Light (2-pack)
Model No. ES06470V
[phone]
IMPORTANT SAFETY OPERATING INSTRUCTIONS
1. Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage
caused by fire, cuts, bruises, death and other dangers.
2. Please follow these general precautions before installing, maintaining, or fixing
1. The packing contains small parts that could be swallowed by children.
2. Keep the packaging material away from children and pets.
3. Do not look directly at the LED lights for any length of time.
4. This light fixture is NOT A TOY and is not suitable for use by children.
5. We do not take responsibility if the instruction manual is not followed correctly or if the product is handled
improperly resulting in damage to person or property.
1. Light source: 1pc 3W white LEDs
2. Brightness: 100lumens
3. Power supply: 3pcs C size dry batteries (not included)
4. Motion Detection Distance: 16 ft.
REF. PARTS
PARAMETER:
securit y
www.homezonesecurity.com
Light fixture 2pcs screws and 2pcs anchors Mounting plate

Battery Operated Motion Sensor Light (2-pack)
[phone]
INSTALLATION AND OPERATION
Model No. ES06470V
Figure 1
Choose desired wall location. Drill two holes on the wall (use the two mounting
holes as template for the screw locations as shown in Figure 1). Insert the plastic
anchors and screw the Bracket with the the two screws into the wall tightly
INSTALL BATTERIES
1. Open the battery cover on the back of the light
2. Install three 1.5V C batteries (9) (not included) into the battery
compartment. Make sure the polarity of the batteries is correct.
3. Replace the battery compartment cover
Figure 2
Switch the unit to “ON” by using the switch on the back of the light. The light has two
operating functions by the switch:
OFF: The light is powered off.
ON: The light illuminates for 15 seconds every time at night when motion is detected.
Figure 3
There are two openings on top of the light fixture. Insert mounting plate through the
opening and push down the light fixture to snap into place.
securit y
www.homezonesecurity.com